When po/xz.pot doesn't exist, running "make" or "make dist" will
create it. Then the .po files will be updated but only if they
actually would change more than the POT-Creation-Date line.
Then the .gmo files would be generated from the .po files.
This is the case before and after this commit.
However, "make dist" and thus "make mydist" did a forced update
to the files, updating them even if the only change was the
POT-Creation-Date line. This had pros and cons: It made it clear
that the .po file really is in sync with the recent strings in
the package. On the other hand, it added noise in form of changed
files in the source tree and distribution tarballs. It can be
ignored with something like "diff -I'^"POT-Creation-Date: '" but
it's still a minor annoyance *if* there's not enough value in
having the most recent timestamp.
Setting DIST_DEPENDS_ON_UPDATE_PO = no means that such forced
update won't happen in "make dist" anymore. However, the "mydist"
target will use xz.pot-update target which is the same target that
is run when xz.pot doesn't exist at all yet. Thus "mydist" will
ensure that the translations are up to date, without noise from
changes that would affect only the POT-Creation-Date line.
Note that po4a always uses msgmerge with --update, so POT-Creation-Date
in the man page translations is never the only change in .po files.
In that sense this commit makes the message translations behave more
similarly to the man page translations.
Distribution tarballs will still have non-reproducible POT-Creation-Date
in po/xz.pot and po4a/xz-man.pot but those are just two files. Even they
could be made reproducible from a Git timestamp if desired.
(cherry picked from commit 9284f1aea3)
The v5.2 branch won't get any translation updates so the fuzzy
strings and obsolete strings are all useless. Cleaning them up
makes the files smaller and less messy to compare.
./update-po
for I in *.po
do
msgattrib --clear-fuzzy --clear-previous --empty \
--no-obsolete --no-wrap "$I" > tmp
mv tmp "$I"
done
The po4a run gave "Parse error at" message from fr.po but
after the fr.po was rewritten the error is gone.
The .po files from the Translation Project come with unwrapped
strings so this matches it.
This may reduce the noise in diffs too. When the beginning of
a paragraph had changed, the rest of the lines got rewrapped
in msgsid. Now it's just one very long line that changes when
a paragraph has been edited.
The --add-location=file option was removed as redundant. The line
numbers don't exist in the .pot file due to --porefs file and thus
they cannot get copied to the .po files either.
(cherry picked from commit 4beba1cd62)
In the past this wasn't done before releases; the Git repository
just contained the files from the Translation Project. But this
way it is clearer when comparing release tarballs against the
Git repository.
Use the template from gettext 0.22.5.
Add --add-location=file to XGETTEXT_OPTIONS and MSGMERGE_OPTIONS.
Add --no-wrap to MSGINIT_OPTIONS.
(cherry picked from commit 451f6986a5)
It is logical why it cannot know for sure that the value has
to be at most 4 if it is less than 16.
The x86 filter is based on a very old LZMA SDK version. Newer
ones have quite a different implementation for the same filter.
Thanks to Sam James.
(cherry picked from commit 6aa2a6deeb)
Clang 17 with -fsanitize=address,undefined:
src/liblzma/common/filter_common.c:366:8: runtime error:
call to function encoder_find through pointer to incorrect
function type 'const lzma_filter_coder *(*)(unsigned long)'
src/liblzma/common/filter_encoder.c:187: note:
encoder_find defined here
Use a wrapper function to get the correct type neatly.
This reduces the number of casts needed too.
This issue could be a problem with control flow integrity (CFI)
methods that check the function type on indirect function calls.
Fixes: 3b34851de1
(cherry picked from commit 278563ef8f)
(cherry picked from commit 64e0a5f726)
It's undefined behavior. The result wasn't ever used as it occurred
in the last iteration of a loop.
Clang 17 with -fsanitize=address,undefined:
$ src/xz/xz --block-list=123
src/xz/args.c:164:12: runtime error: applying non-zero offset 1
to null pointer
Fixes: 88ccf47205
Co-authored-by: Sam James <sam@gentoo.org>
(cherry picked from commit 77c8f60547)
(cherry picked from commit 203d482599)
If the arguments to lzma_index_decoder() or lzma_index_buffer_decode()
were such that LZMA_PROG_ERROR was returned, the lzma_index **i
argument wasn't touched even though the API docs say that *i = NULL
is done if an error occurs. This obviously won't be done even now
if i == NULL but otherwise it is best to do it due to the wording
in the API docs.
In practice this matters very little: The problem can occur only
if the functions are called with invalid arguments, that is,
the calling application must already have a bug.
(cherry picked from commit 71eed2520e)
(cherry picked from commit 214569ace8)
This does the previous commit with CMake.
AC_EGREP_CPP uses AC_REQUIRE so the outermost if-commands must
be changed to AS_IF to ensure that things wont break some day.
See 5a5bd7f871.
(cherry picked from commit 49324b711f)
(cherry picked from commit b03139b1d2)
It doesn't support the __symver__ attribute or __asm__(".symver ...").
The generic symbol versioning can still be used since it only needs
linker support.
(cherry picked from commit c273123ed0)
(cherry picked from commit 08754772e8)
NVHPC compiler has several issues that make it impossible to
build liblzma:
- the compiler fails to produce valid code for delta_decode if the
vectorization is enabled, which results in failed tests.
This introduces NVHPC-specific workarounds that address the issues.
(This commit was contributed under 0BSD but the author confirmed
that it is fine to backport it to the public domain branches. See
https://github.com/tukaani-project/xz/pull/90#issuecomment-2100185936
and the next two messages.)
(cherry picked from commit 096bc0e3f8)
(cherry picked from commit 65ac20807c)
The AC_MSG_ERROR line is overlong anyway as are a few other
AC_MSG_ERROR lines already.
(cherry picked from commit 45d33bfc45)
(cherry picked from commit 9e7daa8dbd)
There are cases when the users want to decide themselves whether
they want to have the generic (even on GNU/Linux) or the linux
(even if we do not recommend that) symbol versioning variant.
The former might be needed to circumvent compiler issues (i.e.
the compiler does not support all features that are required
for the linux versioning), the latter might help in overriding
the assumptions made in the configure script.
(This commit was contributed under 0BSD but the author confirmed
that it is fine to backport it to the public domain branches. See
https://github.com/tukaani-project/xz/pull/90#issuecomment-2100185936
and the next two messages.)
(cherry picked from commit f56ed6fac6)
(cherry picked from commit ce3a9fa94d)
Also explicitly initialize progress_automatic to make it clear
that it can be read before message_init() sets it. Static variable
was initialized to false by default already so this is only for
clarity.
(cherry picked from commit c701a5909a)
(cherry picked from commit 7d3418e496)
It is built and run only manually so this didn't matter
unless one wanted to regenerate the price_table.c.
(cherry picked from commit 8e4ec79483)
(cherry picked from commit 65b5ee0716)
The initial commit 5d018dc035
in 2007 had a comment in sha256.c that the code is based on
Crypto++ Library 5.5.1. In 2009 the Authors list in sha256.c
and the AUTHORS file was updated with information that the
code had come from Crypto++ but via 7-Zip. I know I had viewed
7-Zip's SHA-256 code but back then the C code has been identical
enough with Crypto++, so I don't why I thought the author info
would need that extra step via 7-Zip for this single file.
Another error is that I had mixed sha.* and shacal2.* files
when checking for author info in Crypto++. The shacal2.* files
aren't related to liblzma's sha256.c and thus Kevin Springle's
code in Crypto++ isn't either.
(cherry picked from commit 76946dc433)
(cherry picked from commit 402fb45c74)
This is unlikely to be a bug in an existing application since it relies
on calling lzma_filters_update() on an LZMA1 encoder in the first place.
For instance, it does not affect xz because lzma_filters_update() can
only be used when encoding to the .xz format.
(based on commit 8191720eac)
lzma_raw_encoder() and lzma_raw_encoder_init() used "options" as the
parameter name instead of "filters" (used by the declaration). "filters"
is more clear since the parameter represents the list of filters passed
to the raw encoder, each of which contains filter options.
(cherry picked from commit 27ab54af84)
lzma_encoder_init() did not check for NULL options, but
lzma2_encoder_init() did. This is more of a code style improvement than
anything else to help make lzma_encoder_init() and lzma2_encoder_init()
more similar.
(cherry picked from commit 019afd72e0)
The new is_tty() will report if a file descriptor is a terminal or not.
On POSIX systems, it is a wrapper around isatty(). However, the native
Windows implementation of isatty() will return true for all character
devices, not just terminals. So is_tty() has a special case for Windows
so it can use alternative Windows API functions to determine if a file
descriptor is a terminal.
This fixes a bug with MSVC and MinGW-w64 builds that refused to read from
or write to non-terminal character devices because xz thought it was a
terminal. For instance:
xz foo -c > /dev/null
would fail because /dev/null was assumed to be a terminal.
(cherry picked from commit 0ecfaa6df9)
The macro lzma_attr_visibility_hidden has to be defined to make
fastpos.h usable. The visibility attribute is irrelevant to
fastpos_tablegen.c so simply #define the macro to an empty value.
fastpos_tablegen.c is never built by the included build systems
and so the problem wasn't noticed earlier. It's just a standalone
program for generating fastpos_table.c.
Fixes: https://github.com/tukaani-project/xz/pull/69
Thanks to GitHub user Jamaika1.
(cherry picked from commit d90ed84db9)
Lasse Collin
Sergey Kosukhin
Jia Tan