See the comment. In this package, locale is set at program startup and
not changed later, so the point (2) in the comment isn't a problem.
Fixes: 46ee006162
(cherry picked from commit b40e3321a7fb9dfdf8ffb30e7e0788c2f0abc941)
xzdec isn't translated and doesn't need libintl on Windows even
when NLS is enabled, thus libintl_setlocale() cannot interfere
with the locale settings. Thus, standard setlocale() works perfectly.
In the commit 78868b6e, the explanation in the commit message is wrong.
Fixes: 78868b6ed6
(cherry picked from commit d6796f9ce5359faaaed82926c1735aee3694430f)
Only leave the FindFileFirstA() notes from 20dfca81, reverting
the incorrect setlocale() notes. On Windows, Gettext's <libintl.h>
overrides setlocale() with libintl_setlocale() wrapper. I hadn't
noticed this, and thus my conclusions were wrong.
Fixes: 20dfca8171
(cherry picked from commit e607329a615759f1519016595dd38df7c89208f2)
If wcwidth() isn't available (Windows), previously it was assumed
that one byte == one column in the terminal. Now it is assumed that
one multibyte character == one column. This works better with UTF-8.
Languages that only use single-width characters without any combining
characters should work correctly with this.
In xz, none of po/*.po contain combining characters and only ko.po,
zh_CN.po, and zh_TW.po contain fullwidth characters. Thus, "only"
those three translations in xz are broken on Windows with the
UTF-8 code page. Broken means that column headings in xz -lvv and
(only in the master branch) strings in --long-help are misaligned,
so it's not a huge problem. I don't know if those three languages
displayed perfectly before the UTF-8 change because I hadn't tested
translations with native Windows builds before.
Fixes: 46ee006162
(cherry picked from commit b797c44c42)
xzdec isn't translated and didn't have locale-specific behavior
in the past. On Windows with UTF-8 in the application manifest,
setting the locale makes a difference though:
- Without any setlocale() call, non-ASCII filenames don't display
properly in Command Prompt unless one first uses "chcp 65001"
to set the console code page to UTF-8.
- setlocale(LC_ALL, "") is enough to make non-ASCII filenames
print correctly in Command Prompt without using "chcp 65001",
assuming that the non-UTF-8 code page (like 850) supports
those non-ASCII characters.
- setlocale(LC_ALL, ".UTF8") is even better because then mbrtowc() and
such functions use an UTF-8 locale instead of a legacy code page.
The tuklib_gettext_setlocale() macro takes care of this (without
enabling any translations).
Fixes: 46ee006162
(cherry picked from commit 78868b6ed6)
XZ Utils 5.6.3 set the active code page to UTF-8 to fix CVE-2024-47611.
This wasn't paired with UCRT-specific setlocale(LC_ALL, ".UTF8"), thus
non-ASCII characters from translations became mojibake.
Fixes: 46ee006162
(cherry picked from commit 0d0b574cc4)
Also warn about unpaired surrogates and (somewhat UTF-8-specific)
MAX_PATH issue in FindFirstFileA().
Fixes: 46ee006162
(cherry picked from commit 20dfca8171)
If the early pledge() call on OpenBSD fails, it calls my_errorf()
which requires the "progname" variable.
Fixes: d74fb5f060
(cherry picked from commit 4e936f2340)
With CMake 3.31, there were a few warnings from
CMP0177 "install() DESTINATION paths are normalized".
These occurred because the install(FILES) command in
my_install_man_lang() is called with a DESTINATION path
that contains two consecutive slashes, for example,
"share/man//man1". Such a path is for the English man pages.
With translated man pages, the language code goes between
the slashes. The warning was probably triggered because the
extra slash gets removed by the normalization.
(cherry picked from commit 61feaf681b)
Checked the changes and they're all innocuous. This should hopefully
fix the "externally managed" pip error in these jobs that started
recently.
(cherry picked from commit dbca3d078e)
v5.2 didn't build with CMake. Other branches had
include(CMakePushCheckState) in top-level CMakeLists.txt
which made the build work.
Fixes: 597f49b614
(cherry picked from commit be4bf94446)
IMPORTANT: This includes a security fix to command line tool
argument handling.
Some toolchains embed an application manifest by default to declare
UAC-compliance. Some also declare compatibility with Vista/8/8.1/10/11
to let the app access features newer than those of Vista.
We want all the above but also two more things:
- Declare that the app is long path aware to support paths longer
than 259 characters (this may also require a registry change).
- Force the code page to UTF-8. This allows the command line tools
to access files whose names contain characters that don't exist
in the current legacy code page (except unpaired surrogates).
The UTF-8 code page also fixes security issues in command line
argument handling which can be exploited with malicious filenames.
See the new file w32_application.manifest.comments.txt.
Thanks to Orange Tsai and splitline from DEVCORE Research Team
for discovering this issue.
Thanks to Vijay Sarvepalli for reporting the issue to me.
Thanks to Kelvin Lee for testing with MSVC and helping with
the required build system fixes.
(cherry picked from commit 46ee006162)
Now the information in the "Details" tab in the file properties
dialog matches the naming convention of Cygwin and MSYS2. This
is only a cosmetic change.
(cherry picked from commit dad1530915)
Autotools-based build has always done this so this is for consistency.
However, the CMake build won't create the DEF file when building
for Cygwin or MSYS2 because in that context it should be useless.
(If Cygwin or MSYS2 is used to host building of normal Windows
binaries then the DEF file is still created.)
(cherry picked from commit c3b9dad07d)
If common_w32res.rc is modified, the resource files need to be rebuilt.
In contrast, the liblzma*.map files truly are link dependencies.
(cherry picked from commit da4f275bd1)
The MB output can overflow with huge numbers. Most likely these are
invalid .lzma files anyway, but let's avoid garbage output.
lzmadec was adapted from LZMA Utils. The original code with this bug
was written in 2005, over 19 years ago.
Co-authored-by: Lasse Collin <lasse.collin@tukaani.org>
Closes: https://github.com/tukaani-project/xz/pull/144
(cherry picked from commit 76cfd0a9bb)
"xzdec -M123" exited with exit status 1 without printing
any messages. The "M:" entry should have been removed when
the memory usage limiter support was removed from xzdec.
Fixes: 792331bdee
Closes: https://github.com/tukaani-project/xz/pull/143
[ Lasse: Commit message edits ]
(cherry picked from commit 78355aebb7)
Differences to the zh_CN.po file from the Translation Project:
- Two uses of \v were fixed.
- Missing "OPTS" translation in --riscv[=OPTS] was copied from
previous lines.
- "make update-po" was run to remove line numbers from comments.
(cherry picked from commit 68c54e45d0)
Differences to the ca.po file from the Translation Project:
- An overlong line translating --filters-help was wrapped.
- "make update-po" was used to remove line numbers from the comments
to match the changes in fccebe2b4f
and 093490b582. xz.pot in the TP
is older than these commits.
(cherry picked from commit 2230692aa1)
Support for instruction "movzw" without suffix in "GNU as" was
added in commit [1] and stabilized in binutils 2.27, released
in August 2016. Earlier systems don't accept this instruction
without a suffix, making range_decoder.h's inline assembly
unable to build on old systems such as Ubuntu 16.04, creating
error messages like:
lzma_decoder.c: Assembler messages:
lzma_decoder.c:371: Error: no such instruction: `movzw 2(%r11),%esi'
lzma_decoder.c:373: Error: no such instruction: `movzw 4(%r11),%edi'
lzma_decoder.c:388: Error: no such instruction: `movzw 6(%r11),%edx'
lzma_decoder.c:398: Error: no such instruction: `movzw (%r11,%r14,4),%esi'
Change "movzw" to "movzwl" for compatibility.
[1] https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=c07315e0c610e0e3317b4c02266f81793df253d2
Suggested-by: Lasse Collin <lasse.collin@tukaani.org>
Tested-by: Yifeng Li <tomli@tomli.me>
Signed-off-by: Yifeng Li <tomli@tomli.me>
Fixes: 3182a330c1
Fixes: https://github.com/tukaani-project/xz/issues/121
Closes: https://github.com/tukaani-project/xz/pull/136
(cherry picked from commit 6cd7c86078)
It won't be implemented. find + xargs is more flexible, for example,
it allows compressing small files in parallel. An example for that
has been included in the xz man page since 2010.
(cherry picked from commit baecfa1426)
The liblzma target was recently changed to link against Threads::Threads
with the PRIVATE keyword. I had forgotten that xz itself depends on
pthreads too due to pthread_sigmask(). Thus, the build broke when
building shared liblzma and pthread_sigmask() wasn't in libc.
Thanks to Peter Seiderer for the bug report.
Fixes: ac05f1b0d7
Fixes: https://github.com/tukaani-project/xz/issues/129#issuecomment-2204522994
(cherry picked from commit b3e53122f4)
This addresses the issue I mentioned in
6c095a98fb and speeds up the Valgrind
job a bit, because non-xz tools aren't run unnecessarily with
Valgrind by the script tests.
(cherry picked from commit 7e99856f66)
It shouldn't make any difference because LIBS should be empty
at that point in configure. But prepending is the correct way
because in general the libraries being added might require other
libraries that come later on the command line.
(cherry picked from commit 2402e8a1ae)
It's more robust in case the compiler allows pre-C99 implicit function
declarations. If an x86 intrinsic is missing and gets treated as
implicit function, the linking step will very probably fail. This
isn't the only way to workaround implicit function declarations but
it might be the simplest and cleanest.
The problem hasn't been observed in the wild.
There are a couple more AC_COMPILE_IFELSE uses in configure.ac.
Of these, Landlock check calls prctl() and in theory could have
the same problem. In practice it doesn't as the check program
looks for several other things too. However, it was changed to
AC_LINK_IFELSE still to look more correct.
Similarly, m4/tuklib_cpucores.m4 and m4/tuklib_physmem.m4 were
updated although they haven't given any trouble either. They
have worked all these years because those check programs rely
on specific headers and types: if headers or types are missing,
compilation will fail. Using the linker makes these checks more
similar to the ones in cmake/tuklib_*.cmake which always link.
(cherry picked from commit 7bb46f2b7b)
AC_COMPILE_IFELSE needed -Werror because Clang <= 14 would merely
warn about the unsupported attribute and implicit function declaration.
Changing to AC_LINK_IFELSE handles the implicit declaration because
the symbol __crc32d is unlikely to exist in libc.
Note that the other part of the check is that #include <arm_acle.h>
must work. If the header is missing, most compilers give an error
and the linking step won't be attempted.
Avoiding -Werror makes the check more robust in case CFLAGS contains
warning flags that break -Werror anyway (but this isn't the only check
in configure.ac that has this problem). Using AC_LINK_IFELSE also makes
the check more similar to how it is done in CMakeLists.txt.
(cherry picked from commit 35eb57355a)
Lasse Collin
Dexter Castor Döpping
Mark Wielaard
Sam James
Tobias Stoeckmann
Firas Khalil Khana
Yifeng Li