If common_w32res.rc is modified, the resource files need to be rebuilt.
In contrast, the liblzma*.map files truly are link dependencies.
(cherry picked from commit da4f275bd1)
The MB output can overflow with huge numbers. Most likely these are
invalid .lzma files anyway, but let's avoid garbage output.
lzmadec was adapted from LZMA Utils. The original code with this bug
was written in 2005, over 19 years ago.
Co-authored-by: Lasse Collin <lasse.collin@tukaani.org>
Closes: https://github.com/tukaani-project/xz/pull/144
(cherry picked from commit 76cfd0a9bb)
"xzdec -M123" exited with exit status 1 without printing
any messages. The "M:" entry should have been removed when
the memory usage limiter support was removed from xzdec.
Fixes: 792331bdee
Closes: https://github.com/tukaani-project/xz/pull/143
[ Lasse: Commit message edits ]
(cherry picked from commit 78355aebb7)
Differences to the zh_CN.po file from the Translation Project:
- Two uses of \v were fixed.
- Missing "OPTS" translation in --riscv[=OPTS] was copied from
previous lines.
- "make update-po" was run to remove line numbers from comments.
(cherry picked from commit 68c54e45d0)
Differences to the ca.po file from the Translation Project:
- An overlong line translating --filters-help was wrapped.
- "make update-po" was used to remove line numbers from the comments
to match the changes in fccebe2b4f
and 093490b582. xz.pot in the TP
is older than these commits.
(cherry picked from commit 2230692aa1)
Support for instruction "movzw" without suffix in "GNU as" was
added in commit [1] and stabilized in binutils 2.27, released
in August 2016. Earlier systems don't accept this instruction
without a suffix, making range_decoder.h's inline assembly
unable to build on old systems such as Ubuntu 16.04, creating
error messages like:
lzma_decoder.c: Assembler messages:
lzma_decoder.c:371: Error: no such instruction: `movzw 2(%r11),%esi'
lzma_decoder.c:373: Error: no such instruction: `movzw 4(%r11),%edi'
lzma_decoder.c:388: Error: no such instruction: `movzw 6(%r11),%edx'
lzma_decoder.c:398: Error: no such instruction: `movzw (%r11,%r14,4),%esi'
Change "movzw" to "movzwl" for compatibility.
[1] https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=c07315e0c610e0e3317b4c02266f81793df253d2
Suggested-by: Lasse Collin <lasse.collin@tukaani.org>
Tested-by: Yifeng Li <tomli@tomli.me>
Signed-off-by: Yifeng Li <tomli@tomli.me>
Fixes: 3182a330c1
Fixes: https://github.com/tukaani-project/xz/issues/121
Closes: https://github.com/tukaani-project/xz/pull/136
(cherry picked from commit 6cd7c86078)
It won't be implemented. find + xargs is more flexible, for example,
it allows compressing small files in parallel. An example for that
has been included in the xz man page since 2010.
(cherry picked from commit baecfa1426)
The liblzma target was recently changed to link against Threads::Threads
with the PRIVATE keyword. I had forgotten that xz itself depends on
pthreads too due to pthread_sigmask(). Thus, the build broke when
building shared liblzma and pthread_sigmask() wasn't in libc.
Thanks to Peter Seiderer for the bug report.
Fixes: ac05f1b0d7
Fixes: https://github.com/tukaani-project/xz/issues/129#issuecomment-2204522994
(cherry picked from commit b3e53122f4)
This addresses the issue I mentioned in
6c095a98fb and speeds up the Valgrind
job a bit, because non-xz tools aren't run unnecessarily with
Valgrind by the script tests.
(cherry picked from commit 7e99856f66)
It shouldn't make any difference because LIBS should be empty
at that point in configure. But prepending is the correct way
because in general the libraries being added might require other
libraries that come later on the command line.
(cherry picked from commit 2402e8a1ae)
It's more robust in case the compiler allows pre-C99 implicit function
declarations. If an x86 intrinsic is missing and gets treated as
implicit function, the linking step will very probably fail. This
isn't the only way to workaround implicit function declarations but
it might be the simplest and cleanest.
The problem hasn't been observed in the wild.
There are a couple more AC_COMPILE_IFELSE uses in configure.ac.
Of these, Landlock check calls prctl() and in theory could have
the same problem. In practice it doesn't as the check program
looks for several other things too. However, it was changed to
AC_LINK_IFELSE still to look more correct.
Similarly, m4/tuklib_cpucores.m4 and m4/tuklib_physmem.m4 were
updated although they haven't given any trouble either. They
have worked all these years because those check programs rely
on specific headers and types: if headers or types are missing,
compilation will fail. Using the linker makes these checks more
similar to the ones in cmake/tuklib_*.cmake which always link.
(cherry picked from commit 7bb46f2b7b)
AC_COMPILE_IFELSE needed -Werror because Clang <= 14 would merely
warn about the unsupported attribute and implicit function declaration.
Changing to AC_LINK_IFELSE handles the implicit declaration because
the symbol __crc32d is unlikely to exist in libc.
Note that the other part of the check is that #include <arm_acle.h>
must work. If the header is missing, most compilers give an error
and the linking step won't be attempted.
Avoiding -Werror makes the check more robust in case CFLAGS contains
warning flags that break -Werror anyway (but this isn't the only check
in configure.ac that has this problem). Using AC_LINK_IFELSE also makes
the check more similar to how it is done in CMakeLists.txt.
(cherry picked from commit 35eb57355a)
It's nice to keep these in sync. The use of main() will later allow
AC_LINK_IFELSE usage too which may avoid the more fragile -Werror.
(cherry picked from commit 5a728813c3)
I had missed this simpler method before. It does create a dependency
so that if .in.h changes the copying is done again.
(cherry picked from commit de215a0517)
It was weird to add CMAKE_THREAD_LIBS_INIT in CMAKE_REQUIRED_LIBRARIES
only if CLOCK_MONOTONIC is available. Alternative would be to remove
the thread libs from CMAKE_REQUIRED_LIBRARIES after the check for
pthread_condattr_setclock() but keeping the libs should be fine too.
Then it's ready in case more pthread functions were wanted some day.
(cherry picked from commit e620f35097)
In CMake, check_c_source_compiles() always links too. With
link-time optimization, unused functions may get omitted if
main() doesn't depend on them. Consider the following which
tries to check if somefunction() is available when <someheader.h>
has been included:
#include <someheader.h>
int foo(void) { return somefunction(); }
int main(void) { return 0; }
LTO may omit foo() completely because the program as a whole doesn't
need it and then the program will link even if the symbol somefunction
isn't available in libc or other library being linked in, and then
the test may pass when it shouldn't.
What happens if <someheader.h> doesn't declare somefunction()?
Shouldn't the test fail in the compilation phase already? It should
but many compilers don't follow the C99 and later standards that
prohibit implicit function declarations. Instead such compilers
assume that somefunction() exists, compilation succeeds (with a
warning), and then linker with LTO omits the call to somefunction().
Change the tests so that they are part of main(). If compiler accepts
implicitly declared functions, LTO cannot omit them because it has to
assume that they might have side effects and thus linking will fail.
On the other hand, if the functions/intrinsics being used are supported,
they might get optimized away but in that case it's fine because they
really are supported.
It is fine to use __attribute__((target(...))) for main(). At least
it works with GCC 4.9 to 14.1 on x86-64.
Reported-by: Sam James <sam@gentoo.org>
(cherry picked from commit 114cba69db)
CC from environment is used to initialize CMAKE_C_COMPILER so
setting CMAKE_C_COMPILER explicitly isn't needed.
The syntax in ci_build.bash was broken in case one wished to put
spaces in CC.
(cherry picked from commit 0c1e6d900b)
This way pthread options aren't passed to the linker when linking
against shared liblzma but they are still passed when linking against
static liblzma. (Also, one never needs the include path of the
threading library to use liblzma since liblzma's API headers
don't #include <pthread.h>. But <pthread.h> tends to be in the
default include path so here this change makes no difference.)
One cannot mix target_link_libraries() calls that use the scope
(PRIVATE, PUBLIC, or INTERFACE) keyword and calls that don't use it.
The calls without the keyword are like PUBLIC except perhaps when
they aren't, or something like that... It seems best to always
specify a scope keyword as the meanings of those three keywords
at least are clear.
(cherry picked from commit ac05f1b0d7)
This shouldn't make much difference in practice as on Windows
no flags are needed anyway and unitialized variable (when threading
is disabled) expands to empty. But it's clearer this way.
(cherry picked from commit 2aecffe0f0)
Now liblzma.pc can be relocatable only if using CMake >= 3.20
but that should be OK as now we shouldn't get broken liblzma.pc
if CMAKE_INSTALL_LIBDIR or CMAKE_INSTALL_INCLUDEDIR contain an
absolute path.
Thanks to Eli Schwartz.
(cherry picked from commit ebd155c3a1)
On E2K the function compiles only due to compiler emulation but the
function is never used. It's cleaner to omit the function when it's
not needed even though it's a "static inline" function.
Thanks to Ilya Kurdyukov.
(cherry picked from commit 30a2d5d510)
There is no need to make a similar change in configure.ac.
With Autoconf 2.72, the deprecated macro AC_PROG_CC_C99
is an alias for AC_PROG_CC which prefers a C11 compiler.
(cherry picked from commit 2178acf8a4)
A similar one was already there for CRC64 but nowadays also CRC32
has a CLMUL implementation, so it's good to test it better too.
(cherry picked from commit 89e9f12e03)
Lasse Collin
Tobias Stoeckmann
Firas Khalil Khana
Yifeng Li
Sam James
RainRat