Commit Graph

1658 Commits

Author SHA1 Message Date
Lasse Collin 424ac91c7e Tests: Skip tests in test_*.sh if encoders and/or decoders are disabled.
This isn't perfect as the scripts can still fail if only
certain filters are disabled. This is still an improvement
as now "make check" has better behavior when all encoders
or decoders are disabled.

Grepping ../config.h is simple and fairly clean but it only
works if config.h was created. CMake builds don't create
config.h but they don't use these test scripts either.

Thanks to Sebastian Andrzej Siewior for reporting the problem.
Thanks to Jia Tan for the original patch which grepped xz
error messages instead of config.h.
2022-10-19 19:39:35 +03:00
Lasse Collin ca8bf9d7c5 Test: Remove the (exit 1) lines.
I suspect that I used these in the original version because
Autoconf's manual describes that such a trick is needed in
some specific situations for portability reasons. None of those
situations listed on Autoconf 2.71 manual apply to these test
scripts though so this cleans them up.
2022-10-19 19:03:50 +03:00
Lasse Collin 82fcb7cfc1 Tests: Fix a warning in test_memlimit.c when decoders are disabled. 2022-10-19 17:14:57 +03:00
Lasse Collin b5f8271b45 Tests: Add test_memlimit to .gitignore.
Thanks to Jia Tan.
2022-10-19 17:11:46 +03:00
Jia Tan 6a86e81cab Tests: Refactor test_stream_flags.c.
Converts test_stream_flags to tuktest. Also the test will now
compile and skip properly if encoders or decoders are disabled.

Thanks to Sebastian Andrzej Siewior.
2022-10-06 22:06:17 +03:00
Jia Tan 827ac5b482 Tests: Refactor test_block_header.c.
test_block_header now achieves higher test coverage. Also the
test will now compile and skip properly if encoders or decoders
are disabled.

Thanks to Sebastian Andrzej Siewior.
2022-10-06 21:51:48 +03:00
Jia Tan 8496331895 Tests: Fix compilation issues.
test_bcj_exact_size, test_check, test_hardware, and test_index will
all now compile and skip properly if encoders or decoders are disabled.

Also fixed a small typo (disabed -> disabled).

Thanks to Sebastian Andrzej Siewior.
2022-10-06 17:34:27 +03:00
Lasse Collin 7dcabeec63 Tests: Include mythread.h in the tests that use MYTHREAD_ENABLED. 2022-10-05 16:20:47 +03:00
Jia Tan 14af758a77 liblzma: Fix a compilation issue when encoders are disabled.
When encoders were disabled and threading enabled, outqueue.c and
outqueue.h were not compiled. The multi threaded decoder required
these files, so compilation failed.
2022-10-05 16:11:33 +03:00
Jia Tan 6ca5c354bd Tests: Fix compilation error when threading support has been disabled.
Now tests that require threading are skipped when threading
support has been disabled.

Thanks to Sebastian Andrzej Siewior.
2022-10-05 16:10:21 +03:00
Lasse Collin fae37ad2af tuklib_integer: Add 64-bit endianness-converting reads and writes.
Also update the comment in liblzma's memcmplen.h.

Thanks to Michał Górny for the original patch for the reads.
2022-10-05 14:26:00 +03:00
Lasse Collin 508a44372c liblzma: Add API doc note about the .xz decoder LZMA_MEMLIMIT_ERROR bug.
The bug was fixed in 660739f99a.
2022-09-30 12:06:13 +03:00
Jia Tan 8cc9874a79 liblzma: Add dest and src NULL checks to lzma_index_cat.
The documentation states LZMA_PROG_ERROR can be returned from
lzma_index_cat. Previously, lzma_index_cat could not return
LZMA_PROG_ERROR. Now, the validation is similar to
lzma_index_append, which does a NULL check on the index
parameter.
2022-09-28 15:48:03 +03:00
Jia Tan afd5a8bf53 Tests: Create a test for the lzma_index_cat bug. 2022-09-28 15:34:23 +03:00
Jia Tan 3d5a99ca37 liblzma: Fix copying of check type statistics in lzma_index_cat().
The check type of the last Stream in dest was never copied to
dest->checks (the code tried to copy it but it was done too late).
This meant that the value returned by lzma_index_checks() would
only include the check type of the last Stream when multiple
lzma_indexes had been concatenated.

In xz --list this meant that the summary would only list the
check type of the last Stream, so in this sense this was only
a visual bug. However, it's possible that some applications
use this information for purposes other than merely showing
it to the users in an informational message. I'm not aware of
such applications though and it's quite possible that such
applications don't exist.

Regular streamed decompression in xz or any other application
doesn't use lzma_index_cat() and so this bug cannot affect them.
2022-09-28 15:29:49 +03:00
Lasse Collin a61d321727 tuklib_physmem: Fix Unicode builds on Windows.
Thanks to ArSaCiA Game.
2022-09-28 12:20:41 +03:00
Lasse Collin 5a4d3548ab Tests: Add test_memlimit.c to test restarting after LZMA_MEMLIMIT_ERROR. 2022-09-28 11:12:07 +03:00
Lasse Collin 660739f99a liblzma: Stream decoder: Fix restarting after LZMA_MEMLIMIT_ERROR.
If lzma_code() returns LZMA_MEMLIMIT_ERROR it is now possible
to use lzma_memlimit_set() to increase the limit and continue
decoding. This was supposed to work from the beginning but
there was a bug. With other decoders (.lzma or threaded .xz)
this already worked correctly.
2022-09-28 11:05:15 +03:00
Lasse Collin 7e68fda58c liblzma: Stream decoder: Fix comments. 2022-09-28 11:00:23 +03:00
Lasse Collin f664cb2584 liblzma: ARM64: Add comments. 2022-09-20 16:58:22 +03:00
Lasse Collin b557b4a0ee liblzma: ARM64: Fix wrong comment in API doc.
Thanks to Jia Tan.
2022-09-20 16:27:50 +03:00
Lasse Collin d5b0906fa5 xz: Add --experimental-arm64[=width=WIDTH].
It will be renamed to --arm64 once it is stable.

Man page or --long-help weren't updated yet.
2022-09-19 20:24:26 +03:00
Lasse Collin ecb966de30 liblzma: Add experimental ARM64 BCJ filter with a temporary Filter ID.
That is, the Filter ID will be changed once the design is final.
The current version will be removed. So files created with the
tempoary Filter ID won't be supported in the future.
2022-09-19 20:23:46 +03:00
Lasse Collin 177bdc922c liblzma: Simple/BCJ filters: Allow disabling generic BCJ options.
This will be needed for the ARM64 BCJ filter as it will use
its own options struct.
2022-09-17 22:42:18 +03:00
Lasse Collin c3592d0a55 Tests: Add a test file for lzma_index_append() integer overflow bug.
This test fails before commit 18d7facd38.

test_files.sh now runs xz -l for bad-3-index-uncomp-overflow.xz
because only then the previously-buggy code path gets tested.
Normal decompression doesn't use lzma_index_append() at all.
Instead, lzma_index_hash functions are used and those already
did the overflow check.
2022-09-16 17:08:53 +03:00
Lasse Collin 982b29f828 Translations: Add Turkish translation. 2022-09-16 15:15:05 +03:00
Lasse Collin 1fc088d9f6 Update THANKS. 2022-09-16 14:09:07 +03:00
Lasse Collin 097c7b67ce xzgrep: Fix compatibility with old shells.
Running the current xzgrep on Slackware 10.1 with GNU bash 3.00.15:

    xzgrep: line 231: syntax error near unexpected token `;;'

On SCO OpenServer 5.0.7 with Korn Shell 93r:

    syntax error at line 231 : `;;' unexpected

Turns out that some old shells don't like apostrophes (') inside
command substitutions. For example, the following fails:

    x=$(echo foo
    # asdf'zxcv
    echo bar)
    printf '%s\n' "$x"

The problem was introduced by commits
69d1b3fc29 (2022-03-29),
bd7b290f3f (2022-07-18), and
a648978b20 (2022-07-19).
5.2.6 is the only stable release that included
this problem.

Thanks to Kevin R. Bulgrien for reporting the problem
on SCO OpenServer 5.0.7 and for providing the fix.
2022-09-16 14:07:03 +03:00
Lasse Collin f2d084fe3f Tests: Silence warnings about unused functions from tuktest.h.
Warnings about unused tuktest_run_test conveniently tell which
test programs haven't been converted to tuktest.h yet but I
silenced that warning too for now anyway.

It is fine to use __attribute__((__unused__)) even when the
function is actually used because the attribute only means
that the function might be unused.
2022-09-09 14:12:30 +03:00
Lasse Collin f8ee61e74e liblzma: lzma_filters_copy: Keep dest[] unmodified if an error occurs.
lzma_stream_encoder() and lzma_stream_encoder_mt() always assumed
this. Before this patch, failing lzma_filters_copy() could result
in free(invalid_pointer) or invalid memory reads in stream_encoder.c
or stream_encoder_mt.c.

To trigger this, allocating memory for a filter options structure
has to fail. These are tiny allocations so in practice they very
rarely fail.

Certain badness in the filter chain array could also make
lzma_filters_copy() fail but both stream_encoder.c and
stream_encoder_mt.c validate the filter chain before
trying to copy it, so the crash cannot occur this way.
2022-09-09 13:51:57 +03:00
Jia Tan 18d7facd38 liblzma: lzma_index_append: Add missing integer overflow check.
The documentation in src/liblzma/api/lzma/index.h suggests that
both the unpadded (compressed) size and the uncompressed size
are checked for overflow, but only the unpadded size was checked.
The uncompressed check is done first since that is more likely to
occur than the unpadded or index field size overflows.
2022-09-08 15:19:19 +03:00
Lasse Collin 9ac06cb5b8 Update THANKS. 2022-09-08 15:11:08 +03:00
Jia Tan ba3e4ba2de CMake: Clarify a comment about Windows symlinks without file extension. 2022-09-08 15:07:00 +03:00
Lasse Collin 17485e884c CMake: Update for liblzma_*.map files and fix wrong common_w32res.rc dep.
The previous commit split liblzma.map into liblzma_linux.map and
liblzma_generic.map. This commit updates the CMake build for those.

common_w32res.rc dependency was listed under Linux/FreeBSD while
obviously it belongs to Windows when building a DLL.
2022-09-08 15:02:41 +03:00
Lasse Collin 913ddc5572 liblzma: Vaccinate against an ill patch from RHEL/CentOS 7.
RHEL/CentOS 7 shipped with 5.1.2alpha, including the threaded
encoder that is behind #ifdef LZMA_UNSTABLE in the API headers.
In 5.1.2alpha these symbols are under XZ_5.1.2alpha in liblzma.map.
API/ABI compatibility tracking isn't done between development
releases so newer releases didn't have XZ_5.1.2alpha anymore.

Later RHEL/CentOS 7 updated xz to 5.2.2 but they wanted to keep
the exported symbols compatible with 5.1.2alpha. After checking
the ABI changes it turned out that >= 5.2.0 ABI is backward
compatible with the threaded encoder functions from 5.1.2alpha
(but not vice versa as fixes and extensions to these functions
were made between 5.1.2alpha and 5.2.0).

In RHEL/CentOS 7, XZ Utils 5.2.2 was patched with
xz-5.2.2-compat-libs.patch to modify liblzma.map:

  - XZ_5.1.2alpha was added with lzma_stream_encoder_mt and
    lzma_stream_encoder_mt_memusage. This matched XZ Utils 5.1.2alpha.

  - XZ_5.2 was replaced with XZ_5.2.2. It is clear that this was
    an error; the intention was to keep using XZ_5.2 (XZ_5.2.2
    has never been used in XZ Utils). So XZ_5.2.2 lists all
    symbols that were listed under XZ_5.2 before the patch.
    lzma_stream_encoder_mt and _mt_memusage are included too so
    they are listed both here and under XZ_5.1.2alpha.

The patch didn't add any __asm__(".symver ...") lines to the .c
files. Thus the resulting liblzma.so exports the threaded encoder
functions under XZ_5.1.2alpha only. Listing the two functions
also under XZ_5.2.2 in liblzma.map has no effect without
matching .symver lines.

The lack of XZ_5.2 in RHEL/CentOS 7 means that binaries linked
against unpatched XZ Utils 5.2.x won't run on RHEL/CentOS 7.
This is unfortunate but this alone isn't too bad as the problem
is contained within RHEL/CentOS 7 and doesn't affect users
of other distributions. It could also be fixed internally in
RHEL/CentOS 7.

The second problem is more serious: In XZ Utils 5.2.2 the API
headers don't have #ifdef LZMA_UNSTABLE for obvious reasons.
This is true in RHEL/CentOS 7 version too. Thus now programs
using new APIs can be compiled without an extra #define. However,
the programs end up depending on symbol version XZ_5.1.2alpha
(and possibly also XZ_5.2.2) instead of XZ_5.2 as they would
with an unpatched XZ Utils 5.2.2. This means that such binaries
won't run on other distributions shipping XZ Utils >= 5.2.0 as
they don't provide XZ_5.1.2alpha or XZ_5.2.2; they only provide
XZ_5.2 (and XZ_5.0). (This includes RHEL/CentOS 8 as the patch
luckily isn't included there anymore with XZ Utils 5.2.4.)

Binaries built by RHEL/CentOS 7 users get distributed and then
people wonder why they don't run on some other distribution.
Seems that people have found out about the patch and been copying
it to some build scripts, seemingly curing the symptoms but
actually spreading the illness further and outside RHEL/CentOS 7.

The ill patch seems to be from late 2016 (RHEL 7.3) and in 2017 it
had spread at least to EasyBuild. I heard about the events only
recently. :-(

This commit splits liblzma.map into two versions: one for
GNU/Linux and another for other OSes that can use symbol versioning
(FreeBSD, Solaris, maybe others). The Linux-specific file and the
matching additions to .c files add full compatibility with binaries
that have been built against a RHEL/CentOS-patched liblzma. Builds
for OSes other than GNU/Linux won't get the vaccine as they should
be immune to the problem (I really hope that no build script uses
the RHEL/CentOS 7 patch outside GNU/Linux).

The RHEL/CentOS compatibility symbols XZ_5.1.2alpha and XZ_5.2.2
are intentionally put *after* XZ_5.2 in liblzma_linux.map. This way
if one forgets to #define HAVE_SYMBOL_VERSIONS_LINUX when building,
the resulting liblzma.so.5 will have lzma_stream_encoder_mt@@XZ_5.2
since XZ_5.2 {...} is the first one that lists that function.
Without HAVE_SYMBOL_VERSIONS_LINUX @XZ_5.1.2alpha and @XZ_5.2.2
will be missing but that's still a minor problem compared to
only having lzma_stream_encoder_mt@@XZ_5.1.2alpha!

The "local: *;" line was moved to XZ_5.0 so that it doesn't need
to be moved around. It doesn't matter where it is put.

Having two similar liblzma_*.map files is a bit silly as it is,
at least for now, easily possible to generate the generic one
from the Linux-specific file. But that adds extra steps and
increases the risk of mistakes when supporting more than one
build system. So I rather maintain two files in parallel and let
validate_map.sh check that they are in sync when "make mydist"
is run.

This adds .symver lines for lzma_stream_encoder_mt@XZ_5.2.2 and
lzma_stream_encoder_mt_memusage@XZ_5.2.2 even though these
weren't exported by RHEL/CentOS 7 (only @@XZ_5.1.2alpha was
for these two). I added these anyway because someone might
misunderstand the RHEL/CentOS 7 patch and think that @XZ_5.2.2
(@@XZ_5.2.2) versions were exported too.

At glance one could suggest using __typeof__ to copy the function
prototypes when making aliases. However, this doesn't work trivially
because __typeof__ won't copy attributes (lzma_nothrow, lzma_pure)
and it won't change symbol visibility from hidden to default (done
by LZMA_API()). Attributes could be copied with __copy__ attribute
but that needs GCC 9 and a fallback method would be needed anyway.

This uses __symver__ attribute with GCC >= 10 and
__asm__(".symver ...") with everything else. The attribute method
is required for LTO (-flto) support with GCC. Using -flto with
GCC older than 10 is now broken on GNU/Linux and will not be fixed
(can silently result in a broken liblzma build that has dangerously
incorrect symbol versions). LTO builds with Clang seem to work
with the traditional __asm__(".symver ...") method.

Thanks to Boud Roukema for reporting the problem and discussing
the details and testing the fix.
2022-09-08 15:01:29 +03:00
Lasse Collin 80a1a8bb83 CMake: Add xz symlinks.
These are a minor thing especially since the xz build has
some real problems still like lack of large file support
on 32-bit systems but I'll commit this since the code exists.

Thanks to Jia Tan.
2022-08-31 16:42:04 +03:00
Lasse Collin a4193bb6d8 CMake: Put xz man page install under if(UNIX) like is for xzdec.
Thanks to Jia Tan.
2022-08-31 16:29:38 +03:00
Lasse Collin c1555b1a22 Bump version number for 5.3.3alpha. 2022-08-22 18:16:40 +03:00
Lasse Collin 44fedddc11 Add NEWS for 5.3.3alpha. 2022-08-22 18:13:56 +03:00
Lasse Collin a93e235d7c Translations: Add Portuguese translation.
Jia Tan made white-space changes and also changed "Language: pt_BR\n"
to pt. The translator wasn't reached so I'm hoping these changes
are OK and will commit it without translator's approval.

Thanks to Pedro Albuquerque and Jia Tan.
2022-08-22 18:06:38 +03:00
Lasse Collin e7cf5a946f Translations: Add Serbian translation.
Quite a few white-space changes were made by Jia Tan to make
this look good. Contacting the translator didn't succeed so
I'm committing this without getting translator's approval.

Thanks to Мирослав Николић (Miroslav Nikolic) and Jia Tan.
2022-08-22 18:06:37 +03:00
Lasse Collin cc8617ab53 Translations: Add Swedish translation.
Thanks to Sebastian Rasmussen and Jia Tan.
2022-08-22 18:06:37 +03:00
Lasse Collin c613598c35 Translations: Add Esperanto translation.
Thanks to Keith Bowes and Jia Tan.
2022-08-22 18:06:37 +03:00
Lasse Collin 659a587d67 Translations: Add Catalan translation.
Thanks to Jordi Mas and Jia Tan.
2022-08-22 18:06:37 +03:00
Lasse Collin 739fd8c9bd Translations: Add Ukrainian translation.
Thanks to Yuri Chornoivan and Jia Tan.
2022-08-22 18:06:37 +03:00
Lasse Collin 73280550b1 Translators: Add Romanian translation.
Thanks to Remus-Gabriel Chelu and Jia Tan.
2022-08-22 18:06:37 +03:00
Lasse Collin 2465f5b825 Translations: Update Brazilian Portuguese translation.
One msgstr was changed. The diff is long due to changes
in the source code line numbers in the comments.

Thanks to Rafael Fontenelle.
2022-08-22 18:06:37 +03:00
Lasse Collin 434e1ffd3e Translations: Add Croatian translation.
Thanks to Božidar Putanec and Jia Tan.
2022-08-22 18:06:37 +03:00
Lasse Collin 0732d0f706 Translations: Add Spanish translation.
Thanks to Cristian Othón Martínez Vera and Jia Tan.
2022-08-22 18:06:37 +03:00
Lasse Collin 9899b0f82b Translations: Add Korean translation.
Thanks to Seong-ho Cho and Jia Tan.
2022-08-22 18:06:37 +03:00