It's used only for basic bittrees and fixed-size reverse bittree
because those showed a clear benefit on x86-64 with GCC and Clang.
The other methods were more mixed and thus are commented out but
they should be tested on other archs.
Now extra buffer space is reserved so that repeating bytes for
any single match will never need to copy from two places (both
the beginning and the end of the buffer). This simplifies
dict_repeat() and helps a little with speed.
This seems to reduce .lzma decompression time about 2 %, so
with .xz and CRC it could be slightly less. The small things
add up still.
It's not completely obvious if this is better in the decoder.
It should be good if compiler can avoid creating a branch
(like using CMOV on x86).
This also makes lzma_encoder.c use the new macros.
The new decoder resumes the first decoder loop in the Resumable mode.
Then, the code executes in Non-resumable mode until it detects that it
cannot guarantee to have enough input/output to decode another symbol.
The Resumable mode is how the decoder has always worked. Before decoding
every input bit, it checks if there is enough space and will save its
location to be resumed later. When the decoder has more input/output,
it jumps back to the correct sequence in the Resumable mode code.
When the input/output buffers are large, the Resumable mode is much
slower than the Non-resumable because it has more branches and is harder
for the compiler to optimize since it is in a large switch block.
Early benchmarking shows significant time improvement (8-10% on gcc and
clang x86) by using the Non-resumable code as much as possible.
The new "safe" range decoder mode is the same as old range decoder, but
now the default behavior of the range decoder will not check if there is
enough input or output to complete the operation. When the buffers are
close to fully consumed, the "safe" operations must be used instead. This
will improve speed because it will reduce the number of branches needed
for most of the range decoder operations.
The main reason is a kind of silly one:
xz-man.pot contains strings from all man pages in XZ Utils.
The man pages of xzdiff, xzgrep, and xzmore were under GPLv2
and the rest under 0BSD. Thus xz-man.pot contained strings
under two licences. po4a creates the translated man pages
from the combined 0BSD+GPLv2 xz-man.pot.
I haven't liked this mixing in xz-man.pot but the
Translation Project requires that all man pages must be
in the same .pot file. So a separate xz-man-gpl.pot
wasn't an option.
Since these man pages are short, rewriting them was quick enough.
Now xz-man.pot is entirely under 0BSD and marking the per-file
licenses is simpler.
As a bonus, some wording hopefully is now slightly better
although it's perhaps a matter of taste.
NOTE: In xzgrep.1, the EXIT STATUS section was written by me
in the commit d796b6d7fd so that's
why that section could be taken as is from the old xzgrep.1.
Perhaps the generated files aren't even copyrightable but
using the same license for them as for the rest of the liblzma
keeps things more consistent for tools that look for license info.
The initial commit 5d018dc035
in 2007 had a comment in sha256.c that the code is based on
Crypto++ Library 5.5.1. In 2009 the Authors list in sha256.c
and the AUTHORS file was updated with information that the
code had come from Crypto++ but via 7-Zip. I know I had viewed
7-Zip's SHA-256 code but back then the C code has been identical
enough with Crypto++, so I don't why I thought the author info
would need that extra step via 7-Zip for this single file.
Another error is that I had mixed sha.* and shacal2.* files
when checking for author info in Crypto++. The shacal2.* files
aren't related to liblzma's sha256.c and thus Kevin Springle's
code in Crypto++ isn't either.
If liblzma is configured with --disable-clmul-crc
CFLAGS="-msse4.1 -mpclmul", then it will fail to compile because the
generic version must be used but the CRC tables were not included.
The code was using HAVE_FUNC_ATTRIBUTE_IFUNC instead of CRC_USE_IFUNC.
With ARM64, ifunc is incompatible because it requires non-inline
function calls for runtime detection.
Even though the proper name for the architecture is aarch64, this
project uses ARM64 throughout. So the rename is for consistency.
Additionally, crc32_arm64.h was slightly refactored for the following
changes:
* Added MSVC, FreeBSD, and macOS support in
is_arch_extension_supported().
* crc32_arch_optimized() now checks the size when aligning the
buffer.
* crc32_arch_optimized() loop conditions were slightly modified to
avoid both decrementing the size and incrementing the buffer
pointer.
* Use the intrinsic wrappers defined in <arm_acle.h> because GCC and
Clang name them differently.
* Minor spacing and comment changes.
The CRC_GENERIC is now split into CRC32_GENERIC and CRC64_GENERIC, since
the ARM64 optimizations will be different between CRC32 and CRC64.
For the same reason, CRC_ARCH_OPTIMIZED is split into
CRC32_ARCH_OPTIMIZED and CRC64_ARCH_OPTIMIZED.
ifunc will only be used with x86-64 CLMUL because the runtime detection
methods needed with ARM64 are not compatible with ifunc.
The CRC32 instructions in ARM64 can calculate the CRC32 result
for 8 bytes in a single operation, making the use of ARM64
instructions much faster compared to the general CRC32 algorithm.
Optimized CRC32 will be enabled if ARM64 has CRC extension
running on Linux.
Signed-off-by: Chenxi Mao <chenxi.mao2013@gmail.com>
This hopefully does more good than bad:
+ It's faster by default.
+ Only the threaded compressor creates files that
can be decompressed in threaded mode.
- Compression ratio is worse, usually not too much though.
When it matters, -T1 must be used.
- Memory usage increases.
- Scripts that assume single-threaded mode but don't use -T1 will
possibly use too much resources, for example, if they run
multiple xz processes in parallel to compress multiple files.
- Output from single-threaded and multi-threaded compressors
differ but such changes could happen for other reasons too
(they just haven't happened since 5.0.0).
Not all RISC-V processors support fast unaligned access so
it's better to read only one byte in the main loop. This can
be faster even on x86-64 when compared to reading 32 bits at
a time as half the time the address is only 16-bit aligned.
The downside is larger code size on archs that do support
fast unaligned access.
Version 5.6.0 will be shown, even though upcoming alphas and betas
will be able to support this filter. 5.6.0 looks nicer in the output and
people shouldn't be encouraged to use an unstable version in production
in any way.
The new Filter ID is 0x0B.
Thanks to Chien Wong <m@xv97.com> for the initial version of the Filter,
the xz CLI updates, and the Autotools build system modifications.
Thanks to Igor Pavlov for his many contributions to the design of
the filter.
Now crc_simd_body() in crc_x86_clmul.h is only called once
in a translation unit, we no longer need to be so cautious
about ensuring the always-inline behavior.
Lasse Collin
Jia Tan
Chenxi Mao