root
/
xz
mirror of https://git.tukaani.org/xz.git
1
0
Fork 0
Code Issues Releases Wiki Activity
xz/CMakeLists.txt

2049 lines
75 KiB
CMake
Raw Blame History

# SPDX-License-Identifier: 0BSD
#############################################################################
#
# CMake support for building XZ Utils
#
# The complete CMake-based build hasn't been tested much yet and
# thus it's still slightly experimental. Testing this especially
# outside GNU/Linux and Windows would be great now.
#
# A few things are still missing compared to the Autotools-based build:
#
# - 32-bit x86 assembly code for CRC32 and CRC64 isn't used by default.
# Use the option -DENABLE_X86_ASM=ON on the CMake command line to
# enable the assembly files. They are compatible with Linux, *BSDs,
# Cygwin, MinGW-w64, and Darwin. They are NOT compatible with MSVC.
#
# NOTE: The C code includes a generic version compatible with all
# processors and CLMUL version that requires a new enough processor
# with the PCLMULQDQ instruction. If the 32-bit x86 assembly files
# are used, the CLMUL version in the C code is NOT built. On modern
# processors with CLMUL support, the C code should be faster than
# the assembly code while on old processors the assembly code wins.
#
# - External SHA-256 code isn't supported but it's disabled by
# default in the Autotools build too (--enable-external-sha256).
#
# - Extra compiler warning flags aren't added by default.
#
# About CMAKE_BUILD_TYPE:
#
# - CMake's standard choices are fine to use for production builds,
# including "Release" and "RelWithDebInfo".
#
# NOTE: While "Release" uses -O3 by default with some compilers,
# this file overrides -O3 to -O2 for "Release" builds if
# CMAKE_C_FLAGS_RELEASE is not defined by the user. At least
# with GCC and Clang/LLVM, -O3 doesn't seem useful for this
# package as it can result in bigger binaries without any
# improvement in speed compared to -O2.
#
# - Empty value (the default) is handled slightly specially: It
# adds -DNDEBUG to disable debugging code (assert() and a few
# other things). No optimization flags are added so an empty
# CMAKE_BUILD_TYPE is an easy way to build with whatever
# optimization flags one wants, and so this method is also
# suitable for production builds.
#
# If debugging is wanted when using empty CMAKE_BUILD_TYPE,
# include -UNDEBUG in the CFLAGS environment variable or
# in the CMAKE_C_FLAGS CMake variable to override -DNDEBUG.
# With empty CMAKE_BUILD_TYPE, the -UNDEBUG option will go
# after the -DNDEBUG option on the compiler command line and
# thus NDEBUG will be undefined.
#
# - Non-standard build types like "None" aren't treated specially
# and thus won't have -DNEBUG. Such non-standard build types
# SHOULD BE AVOIDED FOR PRODUCTION BUILDS. Or at least one
# should remember to add -DNDEBUG.
#
# If building from xz.git instead of a release tarball, consider
# the following *before* running cmake:
#
# - To get translated messages, install GNU gettext tools (the
# command msgfmt is needed). Alternatively disable translations
# by setting ENABLE_NLS=OFF.
#
# - To get translated man pages, run po4a/update-po which requires
# the po4a tool. The build works without this step too.
#
# This file provides the following installation components (if you only
# need liblzma, install only its components!):
# - liblzma_Runtime (shared library only)
# - liblzma_Development
# - liblzma_Documentation (examples and Doxygen-generated API docs as HTML)
# - xz_Runtime (xz, the symlinks, and possibly translation files)
# - xz_Documentation (xz man pages and the symlinks)
# - xzdec_Runtime
# - xzdec_Documentation (xzdec *and* lzmadec man pages)
# - lzmadec_Runtime
# - lzmainfo_Runtime
# - lzmainfo_Documentation (lzmainfo man pages)
# - scripts_Runtime (xzdiff, xzgrep, xzless, xzmore)
# - scripts_Documentation (their man pages)
# - Documentation (generic docs like README and licenses)
#
# To find the target liblzma::liblzma from other packages, use the CONFIG
# option with find_package() to avoid a conflict with the FindLibLZMA module
# with case-insensitive file systems. For example, to require liblzma 5.2.5
# or a newer compatible version:
#
# find_package(liblzma 5.2.5 REQUIRED CONFIG)
# target_link_libraries(my_application liblzma::liblzma)
#
#############################################################################
#
# Author: Lasse Collin
#
#############################################################################
# NOTE: Translation support is disabled with CMake older than 3.20.
cmake_minimum_required(VERSION 3.14...3.29 FATAL_ERROR)
include(CMakePushCheckState)
include(CheckIncludeFile)
include(CheckSymbolExists)
include(CheckStructHasMember)
include(CheckCSourceCompiles)
include(cmake/tuklib_large_file_support.cmake)
include(cmake/tuklib_integer.cmake)
include(cmake/tuklib_cpucores.cmake)
include(cmake/tuklib_physmem.cmake)
include(cmake/tuklib_progname.cmake)
include(cmake/tuklib_mbstr.cmake)
set(PACKAGE_NAME "XZ Utils")
set(PACKAGE_BUGREPORT "xz@tukaani.org")
set(PACKAGE_URL "https://tukaani.org/xz/")
# Get the package version from version.h into PACKAGE_VERSION variable.
file(READ src/liblzma/api/lzma/version.h PACKAGE_VERSION)
string(REGEX REPLACE
"^.*\n\
#define LZMA_VERSION_MAJOR ([0-9]+)\n\
.*\
#define LZMA_VERSION_MINOR ([0-9]+)\n\
.*\
#define LZMA_VERSION_PATCH ([0-9]+)\n\
.*$"
"\\1.\\2.\\3" PACKAGE_VERSION "${PACKAGE_VERSION}")
# With several compilers, CMAKE_BUILD_TYPE=Release uses -O3 optimization
# which results in bigger code without a clear difference in speed. If
# no user-defined CMAKE_C_FLAGS_RELEASE is present, override -O3 to -O2
# to make it possible to recommend CMAKE_BUILD_TYPE=Release.
if(NOT DEFINED CMAKE_C_FLAGS_RELEASE)
set(OVERRIDE_O3_IN_C_FLAGS_RELEASE ON)
endif()
# Among other things, this gives us variables xz_VERSION and xz_VERSION_MAJOR.
project(xz VERSION "${PACKAGE_VERSION}" LANGUAGES C)
if(OVERRIDE_O3_IN_C_FLAGS_RELEASE)
# Looking at CMake's source, there aren't any _FLAGS_RELEASE_INIT
# entries where "-O3" would appear as part of some other option,
# thus a simple search and replace should be fine.
string(REPLACE -O3 -O2 CMAKE_C_FLAGS_RELEASE "${CMAKE_C_FLAGS_RELEASE}")
# Update the cache value while keeping its docstring unchanged.
set_property(CACHE CMAKE_C_FLAGS_RELEASE
PROPERTY VALUE "${CMAKE_C_FLAGS_RELEASE}")
endif()
# We need a compiler that supports enough C99 or newer (variable-length arrays
# aren't needed, those are optional in C17). Setting CMAKE_C_STANDARD here
# makes it the default for all targets. It doesn't affect the INTERFACE so
# liblzma::liblzma won't end up with INTERFACE_COMPILE_FEATURES "c_std_99"
# (the API headers are C89 and C++ compatible).
set(CMAKE_C_STANDARD 99)
set(CMAKE_C_STANDARD_REQUIRED ON)
# Support 32-bit x86 assembly files.
if(NOT MSVC)
option(ENABLE_X86_ASM "Enable 32-bit x86 assembly code" OFF)
if(ENABLE_X86_ASM)
enable_language(ASM)
endif()
endif()
# On Apple OSes, don't build executables as bundles:
set(CMAKE_MACOSX_BUNDLE OFF)
# Set CMAKE_INSTALL_LIBDIR and friends. This needs to be done before
# the LOCALEDIR_DEFINITION workaround below.
include(GNUInstallDirs)
# windres from GNU binutils can be tricky with command line arguments
# that contain spaces or other funny characters. Unfortunately we need
# a space in PACKAGE_NAME. Using \x20 to encode the US-ASCII space seems
# to work in both cmd.exe and /bin/sh.
#
# However, even \x20 isn't enough in all situations, resulting in
# "syntax error" from windres. Using --use-temp-file prevents windres
# from using popen() and this seems to fix the problem.
#
# llvm-windres from Clang/LLVM 16.0.6 and older: The \x20 results
# in "XZx20Utils" in the compiled binary. The option --use-temp-file
# makes no difference.
#
# llvm-windres 17.0.0 and later: It emulates GNU windres more accurately, so
# the workarounds used with GNU windres must be used with llvm-windres too.
#
# CMake 3.27 doesn't have CMAKE_RC_COMPILER_ID so we rely on
# CMAKE_C_COMPILER_ID.
if((MINGW OR CYGWIN OR MSYS) AND (
NOT CMAKE_C_COMPILER_ID STREQUAL "Clang" OR
CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL "17"))
# Use workarounds with GNU windres and llvm-windres >= 17.0.0. The \x20
# in PACKAGE_NAME_DEFINITION works with gcc and clang too so we don't need
# to worry how to pass different flags to windres and the C compiler.
# Keep the original PACKAGE_NAME intact for generation of liblzma.pc.
string(APPEND CMAKE_RC_FLAGS " --use-temp-file")
string(REPLACE " " "\\x20" PACKAGE_NAME_DEFINITION "${PACKAGE_NAME}")
# Use octal because "Program Files" would become \x20F.
string(REPLACE " " "\\040" LOCALEDIR_DEFINITION
"${CMAKE_INSTALL_FULL_LOCALEDIR}")
else()
# Elsewhere a space is safe. This also keeps things compatible with
# EBCDIC in case CMake-based build is ever done on such a system.
set(PACKAGE_NAME_DEFINITION "${PACKAGE_NAME}")
set(LOCALEDIR_DEFINITION "${CMAKE_INSTALL_FULL_LOCALEDIR}")
endif()
# Definitions common to all targets:
add_compile_definitions(
# Package info:
PACKAGE_NAME="${PACKAGE_NAME_DEFINITION}"
PACKAGE_BUGREPORT="${PACKAGE_BUGREPORT}"
PACKAGE_URL="${PACKAGE_URL}"
# Standard headers and types are available:
HAVE_STDBOOL_H
HAVE__BOOL
HAVE_STDINT_H
HAVE_INTTYPES_H
# Always enable CRC32 since liblzma should never build without it.
HAVE_CHECK_CRC32
# Disable assert() checks when no build type has been specified. Non-empty
# build types like "Release" and "Debug" handle this by default.
$<$<CONFIG:>:NDEBUG>
)
######################
# System definitions #
######################
# _GNU_SOURCE and such definitions. This specific macro is special since
# it also adds the definitions to CMAKE_REQUIRED_DEFINITIONS.
tuklib_use_system_extensions(ALL)
# Check for large file support. It's required on some 32-bit platforms and
# even on 64-bit MinGW-w64 to get 64-bit off_t. This can be forced off on
# the CMake command line if needed: -DLARGE_FILE_SUPPORT=OFF
tuklib_large_file_support(ALL)
# This is needed by liblzma and xz.
tuklib_integer(ALL)
# This is used for liblzma.pc generation to add -lrt if needed.
set(LIBS)
# Check for clock_gettime(). Do this before checking for threading so
# that we know there if CLOCK_MONOTONIC is available.
check_symbol_exists(clock_gettime time.h HAVE_CLOCK_GETTIME)
if(NOT HAVE_CLOCK_GETTIME)
# With glibc <= 2.17 or Solaris 10 this needs librt.
# Add librt for the next check for HAVE_CLOCK_GETTIME. If it is
# found after including the library, we know that librt is required.
list(INSERT CMAKE_REQUIRED_LIBRARIES 0 rt)
check_symbol_exists(clock_gettime time.h HAVE_CLOCK_GETTIME_LIBRT)
# If it was found now, add librt to all targets and keep it in
# CMAKE_REQUIRED_LIBRARIES for further tests too.
if(HAVE_CLOCK_GETTIME_LIBRT)
link_libraries(rt)
set(LIBS "-lrt") # For liblzma.pc
else()
list(REMOVE_AT CMAKE_REQUIRED_LIBRARIES 0)
endif()
endif()
if(HAVE_CLOCK_GETTIME OR HAVE_CLOCK_GETTIME_LIBRT)
add_compile_definitions(HAVE_CLOCK_GETTIME)
# Check if CLOCK_MONOTONIC is available for clock_gettime().
check_symbol_exists(CLOCK_MONOTONIC time.h HAVE_CLOCK_MONOTONIC)
tuklib_add_definition_if(ALL HAVE_CLOCK_MONOTONIC)
endif()
# Translation support requires CMake 3.20 because it added the Intl::Intl
# target so we don't need to play with the individual variables.
#
# The definition ENABLE_NLS is added only to those targets that use it, thus
# it's not done here. (xz has translations, xzdec doesn't.)
if(CMAKE_VERSION VERSION_GREATER_EQUAL "3.20")
find_package(Intl)
find_package(Gettext)
if(Intl_FOUND)
option(ENABLE_NLS "Native Language Support (translated messages)" ON)
# If translation support is enabled but neither gettext tools or
# pre-generated .gmo files exist, translation support cannot be
# enabled.
#
# The detection of pre-generated .gmo files is done by only
# checking for the existence of a single .gmo file; Ukrainian
# is one of many translations that gets regular updates.
if(ENABLE_NLS AND NOT GETTEXT_FOUND AND
NOT EXISTS "${CMAKE_CURRENT_SOURCE_DIR}/po/uk.gmo")
# This only sets the variable, not the cache variable!
set(ENABLE_NLS OFF)
# This message is shown only when new enough CMake is used and
# library support for translations was found. The assumptions is
# that in this situation the user might have interest in the
# translations. This also keeps this code simpler.
message(WARNING "Native language support (NLS) has been disabled. "
"NLS support requires either gettext tools or "
"pre-generated .gmo files. The latter are only "
"available in distribution tarballs. "
"To avoid this warning, NLS can be explicitly "
"disabled by passing -DENABLE_NLS=OFF to cmake.")
endif()
# Warn if NLS is enabled but translated man pages are missing.
if(UNIX AND ENABLE_NLS AND
NOT EXISTS "${CMAKE_CURRENT_SOURCE_DIR}/po4a/man")
message(WARNING "Native language support (NLS) has been enabled "
"but pre-generated translated man pages "
"were not found and thus they won't be installed. "
"Run 'po4a/update-po' to generate them.")
endif()
# The *installed* name of the translation files is "xz.mo".
set(TRANSLATION_DOMAIN "xz")
endif()
endif()
# Options for new enough GCC or Clang on any arch or operating system:
if(CMAKE_C_COMPILER_ID MATCHES GNU|Clang)
# configure.ac has a long list but it won't be copied here:
add_compile_options(-Wall -Wextra)
endif()
#############################################################################
# liblzma
#############################################################################
option(BUILD_SHARED_LIBS "Build liblzma as a shared library instead of static")
if(NOT WIN32)
# Symbol versioning only affects ELF shared libraries. The option is
# ignored for static libraries.
#
# Determine the default value so that it's always set with
# shared libraries in mind which helps if the build dir is reconfigured
# from static to shared libs without resetting the cache variables.
set(SYMBOL_VERSIONING_DEFAULT OFF)
if(CMAKE_SYSTEM_NAME STREQUAL "Linux" AND
(CMAKE_SYSTEM_PROCESSOR MATCHES "[Mm]icro[Bb]laze" OR
CMAKE_C_COMPILER_ID STREQUAL "NVHPC"))
# As a special case, GNU/Linux on MicroBlaze gets the generic
# symbol versioning because GCC 12 doesn't support the __symver__
# attribute on MicroBlaze. On Linux, CMAKE_SYSTEM_PROCESSOR comes
# from "uname -m" for native builds (should be "microblaze") or from
# the CMake toolchain file (not perfectly standardized but it very
# likely has "microblaze" in lower case or mixed case somewhere in
# the string).
#
# NVIDIA HPC Compiler doesn't support symbol versioning but
# it uses the linked from the system so the linker script
# can still be used to get the generic symbol versioning.
set(SYMBOL_VERSIONING_DEFAULT "generic")
elseif(CMAKE_SYSTEM_NAME STREQUAL "Linux")
# GNU/Linux-specific symbol versioning for shared liblzma.
# This includes a few extra compatibility symbols for RHEL/CentOS 7
# which are pointless on non-glibc non-Linux systems.
#
# Avoid symvers on Linux with non-glibc like musl and uClibc.
# In Autoconf it's enough to check that $host_os equals linux-gnu
# instead of, for example, linux-musl. CMake doesn't provide such
# a method.
#
# This check is here for now since it's not strictly required
# by anything else.
check_c_source_compiles(
"#include <features.h>
#if defined(__GLIBC__) && !defined(__UCLIBC__)
int main(void) { return 0; }
#else
compile error
#endif
"
IS_LINUX_WITH_GLIBC)
if(IS_LINUX_WITH_GLIBC)
set(SYMBOL_VERSIONING_DEFAULT "linux")
endif()
elseif(CMAKE_SYSTEM_NAME STREQUAL "FreeBSD")
set(SYMBOL_VERSIONING_DEFAULT "generic")
endif()
set(SYMBOL_VERSIONING "${SYMBOL_VERSIONING_DEFAULT}" CACHE STRING
"Enable ELF shared library symbol versioning (OFF, generic, linux)")
# Show a dropdown menu in CMake GUI:
set_property(CACHE SYMBOL_VERSIONING PROPERTY STRINGS "OFF;generic;linux")
endif()
set(LIBLZMA_API_HEADERS
src/liblzma/api/lzma.h
src/liblzma/api/lzma/base.h
src/liblzma/api/lzma/bcj.h
src/liblzma/api/lzma/block.h
src/liblzma/api/lzma/check.h
src/liblzma/api/lzma/container.h
src/liblzma/api/lzma/delta.h
src/liblzma/api/lzma/filter.h
src/liblzma/api/lzma/hardware.h
src/liblzma/api/lzma/index.h
src/liblzma/api/lzma/index_hash.h
src/liblzma/api/lzma/lzma12.h
src/liblzma/api/lzma/stream_flags.h
src/liblzma/api/lzma/version.h
src/liblzma/api/lzma/vli.h
)
add_library(liblzma
src/common/mythread.h
src/common/sysdefs.h
src/common/tuklib_common.h
src/common/tuklib_config.h
src/common/tuklib_integer.h
src/common/tuklib_physmem.c
src/common/tuklib_physmem.h
${LIBLZMA_API_HEADERS}
src/liblzma/check/check.c
src/liblzma/check/check.h
src/liblzma/check/crc_common.h
src/liblzma/check/crc_x86_clmul.h
src/liblzma/check/crc32_arm64.h
src/liblzma/common/block_util.c
src/liblzma/common/common.c
src/liblzma/common/common.h
src/liblzma/common/easy_preset.c
src/liblzma/common/easy_preset.h
src/liblzma/common/filter_common.c
src/liblzma/common/filter_common.h
src/liblzma/common/hardware_physmem.c
src/liblzma/common/index.c
src/liblzma/common/index.h
src/liblzma/common/memcmplen.h
src/liblzma/common/stream_flags_common.c
src/liblzma/common/stream_flags_common.h
src/liblzma/common/string_conversion.c
src/liblzma/common/vli_size.c
)
target_include_directories(liblzma PRIVATE
src/liblzma/api
src/liblzma/common
src/liblzma/check
src/liblzma/lz
src/liblzma/rangecoder
src/liblzma/lzma
src/liblzma/delta
src/liblzma/simple
src/common
)
######################
# Size optimizations #
######################
option(ENABLE_SMALL "Reduce code size at expense of speed. \
This may be useful together with CMAKE_BUILD_TYPE=MinSizeRel.")
if(ENABLE_SMALL)
add_compile_definitions(HAVE_SMALL)
endif()
##########
# Checks #
##########
set(ADDITIONAL_SUPPORTED_CHECKS crc64 sha256)
set(ADDITIONAL_CHECK_TYPES "${ADDITIONAL_SUPPORTED_CHECKS}" CACHE STRING
"Additional check types to support (crc32 is always built)")
foreach(CHECK IN LISTS ADDITIONAL_CHECK_TYPES)
if(NOT CHECK IN_LIST ADDITIONAL_SUPPORTED_CHECKS)
message(FATAL_ERROR "'${CHECK}' is not a supported check type")
endif()
endforeach()
if(ENABLE_SMALL)
target_sources(liblzma PRIVATE src/liblzma/check/crc32_small.c)
else()
target_sources(liblzma PRIVATE
src/liblzma/check/crc32_table.c
src/liblzma/check/crc32_table_be.h
src/liblzma/check/crc32_table_le.h
)
if(ENABLE_X86_ASM)
target_sources(liblzma PRIVATE src/liblzma/check/crc32_x86.S)
else()
target_sources(liblzma PRIVATE src/liblzma/check/crc32_fast.c)
endif()
endif()
if("crc64" IN_LIST ADDITIONAL_CHECK_TYPES)
add_compile_definitions("HAVE_CHECK_CRC64")
if(ENABLE_SMALL)
target_sources(liblzma PRIVATE src/liblzma/check/crc64_small.c)
else()
target_sources(liblzma PRIVATE
src/liblzma/check/crc64_table.c
src/liblzma/check/crc64_table_be.h
src/liblzma/check/crc64_table_le.h
)
if(ENABLE_X86_ASM)
target_sources(liblzma PRIVATE src/liblzma/check/crc64_x86.S)
else()
target_sources(liblzma PRIVATE src/liblzma/check/crc64_fast.c)
endif()
endif()
endif()
if("sha256" IN_LIST ADDITIONAL_CHECK_TYPES)
add_compile_definitions("HAVE_CHECK_SHA256")
target_sources(liblzma PRIVATE src/liblzma/check/sha256.c)
endif()
#################
# Match finders #
#################
set(SUPPORTED_MATCH_FINDERS hc3 hc4 bt2 bt3 bt4)
set(MATCH_FINDERS "${SUPPORTED_MATCH_FINDERS}" CACHE STRING
"Match finders to support (at least one is required for LZMA1 or LZMA2)")
foreach(MF IN LISTS MATCH_FINDERS)
if(MF IN_LIST SUPPORTED_MATCH_FINDERS)
string(TOUPPER "${MF}" MF_UPPER)
add_compile_definitions("HAVE_MF_${MF_UPPER}")
else()
message(FATAL_ERROR "'${MF}' is not a supported match finder")
endif()
endforeach()
#############
# Threading #
#############
# Supported threading methods:
# ON - autodetect the best threading method. The autodetection will
# prefer Windows threading (win95 or vista) over posix if both are
# available. vista threads will be used over win95 unless it is a
# 32-bit build.
# OFF - Disable threading.
# posix - Use posix threading (pthreads), or throw an error if not available.
# win95 - Use Windows win95 threading, or throw an error if not available.
# vista - Use Windows vista threading, or throw an error if not available.
set(SUPPORTED_THREADING_METHODS ON OFF posix win95 vista)
set(ENABLE_THREADS ON CACHE STRING
"Threading method: Set to 'ON' to autodetect, 'OFF' to disable threading.")
# Create dropdown in CMake GUI since only 1 threading method is possible
# to select in a build.
set_property(CACHE ENABLE_THREADS
PROPERTY STRINGS "${SUPPORTED_THREADING_METHODS}")
# This is a flag variable set when win95 threads are used. We must ensure
# the combination of enable_small and win95 threads is not used without a
# compiler supporting attribute __constructor__.
set(USE_WIN95_THREADS OFF)
# This is a flag variable set when posix threads (pthreads) are used.
# It's needed when creating liblzma-config.cmake where dependency on
# Threads::Threads is only needed with pthreads.
set(USE_POSIX_THREADS OFF)
if(NOT ENABLE_THREADS IN_LIST SUPPORTED_THREADING_METHODS)
message(FATAL_ERROR "'${ENABLE_THREADS}' is not a supported "
"threading method")
endif()
if(ENABLE_THREADS)
# Also set THREADS_PREFER_PTHREAD_FLAG since the flag has no effect
# for Windows threading.
set(THREADS_PREFER_PTHREAD_FLAG TRUE)
find_package(Threads REQUIRED)
# If both Windows and posix threading are available, prefer Windows.
# Note that on Cygwin CMAKE_USE_WIN32_THREADS_INIT is false.
if(CMAKE_USE_WIN32_THREADS_INIT AND NOT ENABLE_THREADS STREQUAL "posix")
if(ENABLE_THREADS STREQUAL "win95"
OR (ENABLE_THREADS STREQUAL "ON"
AND CMAKE_SIZEOF_VOID_P EQUAL 4))
# Use Windows 95 (and thus XP) compatible threads.
# This avoids use of features that were added in
# Windows Vista. This is used for 32-bit x86 builds for
# compatibility reasons since it makes no measurable difference
# in performance compared to Vista threads.
set(USE_WIN95_THREADS ON)
add_compile_definitions(MYTHREAD_WIN95)
else()
add_compile_definitions(MYTHREAD_VISTA)
endif()
elseif(CMAKE_USE_PTHREADS_INIT)
if(ENABLE_THREADS STREQUAL "posix" OR ENABLE_THREADS STREQUAL "ON")
# The threading library only needs to be explicitly linked
# for posix threads, so this is needed for creating
# liblzma-config.cmake later.
set(USE_POSIX_THREADS ON)
target_link_libraries(liblzma Threads::Threads)
add_compile_definitions(MYTHREAD_POSIX)
# Check if pthread_condattr_setclock() exists to
# use CLOCK_MONOTONIC.
if(HAVE_CLOCK_MONOTONIC)
list(INSERT CMAKE_REQUIRED_LIBRARIES 0
"${CMAKE_THREAD_LIBS_INIT}")
check_symbol_exists(pthread_condattr_setclock pthread.h
HAVE_PTHREAD_CONDATTR_SETCLOCK)
tuklib_add_definition_if(ALL HAVE_PTHREAD_CONDATTR_SETCLOCK)
endif()
else()
message(SEND_ERROR
"Windows threading method was requested but a compatible "
"library could not be found")
endif()
else()
message(SEND_ERROR "No supported threading library found")
endif()
target_sources(liblzma PRIVATE
src/common/tuklib_cpucores.c
src/common/tuklib_cpucores.h
src/liblzma/common/hardware_cputhreads.c
src/liblzma/common/outqueue.c
src/liblzma/common/outqueue.h
)
endif()
############
# Encoders #
############
set(SIMPLE_FILTERS
x86
arm
armthumb
arm64
powerpc
ia64
sparc
riscv
)
# The SUPPORTED_FILTERS are shared between Encoders and Decoders
# since only lzip does not appear in both lists. lzip is a special
# case anyway, so it is handled separately in the Decoders section.
set(SUPPORTED_FILTERS
lzma1
lzma2
delta
"${SIMPLE_FILTERS}"
)
set(ENCODERS "${SUPPORTED_FILTERS}" CACHE STRING "Encoders to support")
# If LZMA2 is enabled, then LZMA1 must also be enabled.
if(NOT "lzma1" IN_LIST ENCODERS AND "lzma2" IN_LIST ENCODERS)
message(FATAL_ERROR "LZMA2 encoder requires that LZMA1 is also enabled")
endif()
# If LZMA1 is enabled, then at least one match finder must be enabled.
if(MATCH_FINDERS STREQUAL "" AND "lzma1" IN_LIST ENCODERS)
message(FATAL_ERROR "At least 1 match finder is required for an "
"LZ-based encoder")
endif()
set(HAVE_DELTA_CODER OFF)
set(SIMPLE_ENCODERS OFF)
set(HAVE_ENCODERS OFF)
foreach(ENCODER IN LISTS ENCODERS)
if(ENCODER IN_LIST SUPPORTED_FILTERS)
set(HAVE_ENCODERS ON)
if(NOT SIMPLE_ENCODERS AND ENCODER IN_LIST SIMPLE_FILTERS)
set(SIMPLE_ENCODERS ON)
endif()
string(TOUPPER "${ENCODER}" ENCODER_UPPER)
add_compile_definitions("HAVE_ENCODER_${ENCODER_UPPER}")
else()
message(FATAL_ERROR "'${ENCODER}' is not a supported encoder")
endif()
endforeach()
if(HAVE_ENCODERS)
add_compile_definitions(HAVE_ENCODERS)
target_sources(liblzma PRIVATE
src/liblzma/common/alone_encoder.c
src/liblzma/common/block_buffer_encoder.c
src/liblzma/common/block_buffer_encoder.h
src/liblzma/common/block_encoder.c
src/liblzma/common/block_encoder.h
src/liblzma/common/block_header_encoder.c
src/liblzma/common/easy_buffer_encoder.c
src/liblzma/common/easy_encoder.c
src/liblzma/common/easy_encoder_memusage.c
src/liblzma/common/filter_buffer_encoder.c
src/liblzma/common/filter_encoder.c
src/liblzma/common/filter_encoder.h
src/liblzma/common/filter_flags_encoder.c
src/liblzma/common/index_encoder.c
src/liblzma/common/index_encoder.h
src/liblzma/common/stream_buffer_encoder.c
src/liblzma/common/stream_encoder.c
src/liblzma/common/stream_flags_encoder.c
src/liblzma/common/vli_encoder.c
)
if(ENABLE_THREADS)
target_sources(liblzma PRIVATE
src/liblzma/common/stream_encoder_mt.c
)
endif()
if(SIMPLE_ENCODERS)
target_sources(liblzma PRIVATE
src/liblzma/simple/simple_encoder.c
src/liblzma/simple/simple_encoder.h
)
endif()
if("lzma1" IN_LIST ENCODERS)
target_sources(liblzma PRIVATE
src/liblzma/lzma/lzma_encoder.c
src/liblzma/lzma/lzma_encoder.h
src/liblzma/lzma/lzma_encoder_optimum_fast.c
src/liblzma/lzma/lzma_encoder_optimum_normal.c
src/liblzma/lzma/lzma_encoder_private.h
src/liblzma/lzma/fastpos.h
src/liblzma/lz/lz_encoder.c
src/liblzma/lz/lz_encoder.h
src/liblzma/lz/lz_encoder_hash.h
src/liblzma/lz/lz_encoder_hash_table.h
src/liblzma/lz/lz_encoder_mf.c
src/liblzma/rangecoder/price.h
src/liblzma/rangecoder/price_table.c
src/liblzma/rangecoder/range_encoder.h
)
if(NOT ENABLE_SMALL)
target_sources(liblzma PRIVATE src/liblzma/lzma/fastpos_table.c)
endif()
endif()
if("lzma2" IN_LIST ENCODERS)
target_sources(liblzma PRIVATE
src/liblzma/lzma/lzma2_encoder.c
src/liblzma/lzma/lzma2_encoder.h
)
endif()
if("delta" IN_LIST ENCODERS)
set(HAVE_DELTA_CODER ON)
target_sources(liblzma PRIVATE
src/liblzma/delta/delta_encoder.c
src/liblzma/delta/delta_encoder.h
)
endif()
endif()
############
# Decoders #
############
set(DECODERS "${SUPPORTED_FILTERS}" CACHE STRING "Decoders to support")
set(SIMPLE_DECODERS OFF)
set(HAVE_DECODERS OFF)
foreach(DECODER IN LISTS DECODERS)
if(DECODER IN_LIST SUPPORTED_FILTERS)
set(HAVE_DECODERS ON)
if(NOT SIMPLE_DECODERS AND DECODER IN_LIST SIMPLE_FILTERS)
set(SIMPLE_DECODERS ON)
endif()
string(TOUPPER "${DECODER}" DECODER_UPPER)
add_compile_definitions("HAVE_DECODER_${DECODER_UPPER}")
else()
message(FATAL_ERROR "'${DECODER}' is not a supported decoder")
endif()
endforeach()
if(HAVE_DECODERS)
add_compile_definitions(HAVE_DECODERS)
target_sources(liblzma PRIVATE
src/liblzma/common/alone_decoder.c
src/liblzma/common/alone_decoder.h
src/liblzma/common/auto_decoder.c
src/liblzma/common/block_buffer_decoder.c
src/liblzma/common/block_decoder.c
src/liblzma/common/block_decoder.h
src/liblzma/common/block_header_decoder.c
src/liblzma/common/easy_decoder_memusage.c
src/liblzma/common/file_info.c
src/liblzma/common/filter_buffer_decoder.c
src/liblzma/common/filter_decoder.c
src/liblzma/common/filter_decoder.h
src/liblzma/common/filter_flags_decoder.c
src/liblzma/common/index_decoder.c
src/liblzma/common/index_decoder.h
src/liblzma/common/index_hash.c
src/liblzma/common/stream_buffer_decoder.c
src/liblzma/common/stream_decoder.c
src/liblzma/common/stream_flags_decoder.c
src/liblzma/common/stream_decoder.h
src/liblzma/common/vli_decoder.c
)
if(ENABLE_THREADS)
target_sources(liblzma PRIVATE
src/liblzma/common/stream_decoder_mt.c
)
endif()
if(SIMPLE_DECODERS)
target_sources(liblzma PRIVATE
src/liblzma/simple/simple_decoder.c
src/liblzma/simple/simple_decoder.h
)
endif()
if("lzma1" IN_LIST DECODERS)
target_sources(liblzma PRIVATE
src/liblzma/lzma/lzma_decoder.c
src/liblzma/lzma/lzma_decoder.h
src/liblzma/rangecoder/range_decoder.h
src/liblzma/lz/lz_decoder.c
src/liblzma/lz/lz_decoder.h
)
endif()
if("lzma2" IN_LIST DECODERS)
target_sources(liblzma PRIVATE
src/liblzma/lzma/lzma2_decoder.c
src/liblzma/lzma/lzma2_decoder.h
)
endif()
if("delta" IN_LIST DECODERS)
set(HAVE_DELTA_CODER ON)
target_sources(liblzma PRIVATE
src/liblzma/delta/delta_decoder.c
src/liblzma/delta/delta_decoder.h
)
endif()
endif()
# Some sources must appear if the filter is configured as either
# an encoder or decoder.
if("lzma1" IN_LIST ENCODERS OR "lzma1" IN_LIST DECODERS)
target_sources(liblzma PRIVATE
src/liblzma/rangecoder/range_common.h
src/liblzma/lzma/lzma_encoder_presets.c
src/liblzma/lzma/lzma_common.h
)
endif()
if(HAVE_DELTA_CODER)
target_sources(liblzma PRIVATE
src/liblzma/delta/delta_common.c
src/liblzma/delta/delta_common.h
src/liblzma/delta/delta_private.h
)
endif()
if(SIMPLE_ENCODERS OR SIMPLE_DECODERS)
target_sources(liblzma PRIVATE
src/liblzma/simple/simple_coder.c
src/liblzma/simple/simple_coder.h
src/liblzma/simple/simple_private.h
)
endif()
foreach(SIMPLE_CODER IN LISTS SIMPLE_FILTERS)
if(SIMPLE_CODER IN_LIST ENCODERS OR SIMPLE_CODER IN_LIST DECODERS)
target_sources(liblzma PRIVATE "src/liblzma/simple/${SIMPLE_CODER}.c")
endif()
endforeach()
#############
# MicroLZMA #
#############
option(MICROLZMA_ENCODER
"MicroLZMA encoder (needed by specific applications only)" ON)
option(MICROLZMA_DECODER
"MicroLZMA decoder (needed by specific applications only)" ON)
if(MICROLZMA_ENCODER)
if(NOT "lzma1" IN_LIST ENCODERS)
message(FATAL_ERROR "The LZMA1 encoder is required to support the "
"MicroLZMA encoder")
endif()
target_sources(liblzma PRIVATE src/liblzma/common/microlzma_encoder.c)
endif()
if(MICROLZMA_DECODER)
if(NOT "lzma1" IN_LIST DECODERS)
message(FATAL_ERROR "The LZMA1 decoder is required to support the "
"MicroLZMA decoder")
endif()
target_sources(liblzma PRIVATE src/liblzma/common/microlzma_decoder.c)
endif()
#############################
# lzip (.lz) format support #
#############################
option(LZIP_DECODER "Support lzip decoder" ON)
if(LZIP_DECODER)
# If lzip decoder support is requested, make sure LZMA1 decoder is enabled.
if(NOT "lzma1" IN_LIST DECODERS)
message(FATAL_ERROR "The LZMA1 decoder is required to support the "
"lzip decoder")
endif()
add_compile_definitions(HAVE_LZIP_DECODER)
target_sources(liblzma PRIVATE
src/liblzma/common/lzip_decoder.c
src/liblzma/common/lzip_decoder.h
)
endif()
##############
# Sandboxing #
##############
# ON Use sandboxing if a supported method is available in the OS.
# OFF Disable sandboxing.
# capsicum Require Capsicum (FreeBSD >= 10.2) and fail if not found.
# pledge Require pledge(2) (OpenBSD >= 5.9) and fail if not found.
# landlock Require Landlock (Linux >= 5.13) and fail if not found.
set(SUPPORTED_SANDBOX_METHODS ON OFF capsicum pledge landlock)
set(ENABLE_SANDBOX ON CACHE STRING
"Sandboxing method to use in 'xz', 'xzdec', and 'lzmadec'")
set_property(CACHE ENABLE_SANDBOX
PROPERTY STRINGS "${SUPPORTED_SANDBOX_METHODS}")
if(NOT ENABLE_SANDBOX IN_LIST SUPPORTED_SANDBOX_METHODS)
message(FATAL_ERROR "'${ENABLE_SANDBOX}' is not a supported "
"sandboxing method")
endif()
# When autodetecting, the search order is fixed and we must not find
# more than one method.
if(ENABLE_SANDBOX STREQUAL "OFF")
set(SANDBOX_FOUND ON)
else()
set(SANDBOX_FOUND OFF)
endif()
# Since xz and xzdec can both use sandboxing, the compile definition needed
# to use the sandbox must be added to both targets.
set(SANDBOX_COMPILE_DEFINITION OFF)
# Sandboxing: Capsicum
if(NOT SANDBOX_FOUND AND ENABLE_SANDBOX MATCHES "^ON$|^capsicum$")
check_symbol_exists(cap_rights_limit sys/capsicum.h
HAVE_CAP_RIGHTS_LIMIT)
if(HAVE_CAP_RIGHTS_LIMIT)
set(SANDBOX_COMPILE_DEFINITION "HAVE_CAP_RIGHTS_LIMIT")
set(SANDBOX_FOUND ON)
endif()
endif()
# Sandboxing: pledge(2)
if(NOT SANDBOX_FOUND AND ENABLE_SANDBOX MATCHES "^ON$|^pledge$")
check_symbol_exists(pledge unistd.h HAVE_PLEDGE)
if(HAVE_PLEDGE)
set(SANDBOX_COMPILE_DEFINITION "HAVE_PLEDGE")
set(SANDBOX_FOUND ON)
endif()
endif()
# Sandboxing: Landlock
if(NOT SANDBOX_FOUND AND ENABLE_SANDBOX MATCHES "^ON$|^landlock$")
# A compile check is done here because some systems have
# linux/landlock.h, but do not have the syscalls defined
# in order to actually use Linux Landlock.
check_c_source_compiles("
#include <linux/landlock.h>
#include <sys/syscall.h>
#include <sys/prctl.h>
void my_sandbox(void)
{
(void)prctl(PR_SET_NO_NEW_PRIVS, 1, 0, 0, 0);
(void)SYS_landlock_create_ruleset;
(void)SYS_landlock_restrict_self;
(void)LANDLOCK_CREATE_RULESET_VERSION;
return;
}
int main(void) { return 0; }
"
HAVE_LINUX_LANDLOCK)
if(HAVE_LINUX_LANDLOCK)
set(SANDBOX_COMPILE_DEFINITION "HAVE_LINUX_LANDLOCK")
set(SANDBOX_FOUND ON)
# Of our three sandbox methods, only Landlock is incompatible
# with -fsanitize. FreeBSD 13.2 with Capsicum was tested with
# -fsanitize=address,undefined and had no issues. OpenBSD (as
# of version 7.4) has minimal support for process instrumentation.
# OpenBSD does not distribute the additional libraries needed
# (libasan, libubsan, etc.) with GCC or Clang needed for runtime
# sanitization support and instead only support
# -fsanitize-minimal-runtime for minimal undefined behavior
# sanitization. This minimal support is compatible with our use
# of the Pledge sandbox. So only Landlock will result in a
# build that cannot compress or decompress a single file to
# standard out.
if(CMAKE_C_FLAGS MATCHES "-fsanitize=")
message(SEND_ERROR
"CMAKE_C_FLAGS or the environment variable CFLAGS "
"contains '-fsanitize=' which is incompatible "
"with Landlock sandboxing. Use -DENABLE_SANDBOX=OFF "
"as an argument to 'cmake' when using '-fsanitize'.")
endif()
endif()
endif()
if(NOT SANDBOX_FOUND AND NOT ENABLE_SANDBOX MATCHES "^ON$|^OFF$")
message(SEND_ERROR "ENABLE_SANDBOX=${ENABLE_SANDBOX} was used but "
"support for the sandboxing method wasn't found.")
endif()
###
# Put the tuklib functions under the lzma_ namespace.
target_compile_definitions(liblzma PRIVATE TUKLIB_SYMBOL_PREFIX=lzma_)
tuklib_cpucores(liblzma)
tuklib_physmem(liblzma)
# While liblzma can be built without tuklib_cpucores or tuklib_physmem
# modules, the liblzma API functions lzma_cputhreads() and lzma_physmem()
# will then be useless (which isn't too bad but still unfortunate). Since
# I expect the CMake-based builds to be only used on systems that are
# supported by these tuklib modules, problems with these tuklib modules
# are considered a hard error for now. This hopefully helps to catch bugs
# in the CMake versions of the tuklib checks.
if(NOT TUKLIB_CPUCORES_FOUND OR NOT TUKLIB_PHYSMEM_FOUND)
# Use SEND_ERROR instead of FATAL_ERROR. If someone reports a bug,
# seeing the results of the remaining checks can be useful too.
message(SEND_ERROR
"tuklib_cpucores() or tuklib_physmem() failed. "
"Unless you really are building for a system where these "
"modules are not supported (unlikely), this is a bug in the "
"included cmake/tuklib_*.cmake files that should be fixed. "
"To build anyway, edit this CMakeLists.txt to ignore this error.")
endif()
# Check for __attribute__((__constructor__)) support.
# This needs -Werror because some compilers just warn
# about this being unsupported.
cmake_push_check_state()
set(CMAKE_REQUIRED_FLAGS "-Werror")
check_c_source_compiles("
__attribute__((__constructor__))
static void my_constructor_func(void) { return; }
int main(void) { return 0; }
"
HAVE_FUNC_ATTRIBUTE_CONSTRUCTOR)
cmake_pop_check_state()
tuklib_add_definition_if(liblzma HAVE_FUNC_ATTRIBUTE_CONSTRUCTOR)
# The Win95 threading lacks a thread-safe one-time initialization function.
# The one-time initialization is needed for crc32_small.c and crc64_small.c
# create the CRC tables. So if small mode is enabled, the threading mode is
# win95, and the compiler does not support attribute constructor, then we
# would end up with a multithreaded build that is thread-unsafe. As a
# result this configuration is not allowed.
if(USE_WIN95_THREADS AND ENABLE_SMALL AND NOT HAVE_FUNC_ATTRIBUTE_CONSTRUCTOR)
message(SEND_ERROR "Threading method win95 and ENABLE_SMALL "
"cannot be used at the same time with a compiler "
"that doesn't support "
"__attribute__((__constructor__))")
endif()
# cpuid.h
check_include_file(cpuid.h HAVE_CPUID_H)
tuklib_add_definition_if(liblzma HAVE_CPUID_H)
# immintrin.h:
check_include_file(immintrin.h HAVE_IMMINTRIN_H)
if(HAVE_IMMINTRIN_H)
target_compile_definitions(liblzma PRIVATE HAVE_IMMINTRIN_H)
# SSE2 intrinsics:
check_c_source_compiles("
#include <immintrin.h>
int main(void)
{
__m128i x = { 0 };
_mm_movemask_epi8(x);
return 0;
}
"
HAVE__MM_MOVEMASK_EPI8)
tuklib_add_definition_if(liblzma HAVE__MM_MOVEMASK_EPI8)
# CLMUL intrinsic:
option(ALLOW_CLMUL_CRC "Allow carryless multiplication for CRC \
calculation if supported by the system" ON)
if(ALLOW_CLMUL_CRC)
check_c_source_compiles("
#include <immintrin.h>
#if defined(__e2k__) && __iset__ < 6
# error
#endif
#if (defined(__GNUC__) || defined(__clang__)) \
&& !defined(__EDG__)
__attribute__((__target__(\"ssse3,sse4.1,pclmul\")))
#endif
__m128i my_clmul(__m128i a)
{
const __m128i b = _mm_set_epi64x(1, 2);
return _mm_clmulepi64_si128(a, b, 0);
}
int main(void) { return 0; }
"
HAVE_USABLE_CLMUL)
tuklib_add_definition_if(liblzma HAVE_USABLE_CLMUL)
endif()
endif()
# ARM64 C Language Extensions define CRC32 functions in arm_acle.h.
# These are supported by at least GCC and Clang which both need
# __attribute__((__target__("+crc"))), unless the needed compiler flags
# are used to support the CRC instruction.
option(ALLOW_ARM64_CRC32 "Allow ARM64 CRC32 instruction if supported by \
the system" ON)
if(ALLOW_ARM64_CRC32)
check_c_source_compiles("
#include <stdint.h>
#ifndef _MSC_VER
#include <arm_acle.h>
#endif
#if (defined(__GNUC__) || defined(__clang__)) && !defined(__EDG__)
__attribute__((__target__(\"+crc\")))
#endif
uint32_t my_crc(uint32_t a, uint64_t b)
{
return __crc32d(a, b);
}
int main(void) { return 0; }
"
HAVE_ARM64_CRC32)
if(HAVE_ARM64_CRC32)
target_compile_definitions(liblzma PRIVATE HAVE_ARM64_CRC32)
# Check for ARM64 CRC32 instruction runtime detection.
# getauxval() is supported on Linux.
check_symbol_exists(getauxval sys/auxv.h HAVE_GETAUXVAL)
tuklib_add_definition_if(liblzma HAVE_GETAUXVAL)
# elf_aux_info() is supported on FreeBSD.
check_symbol_exists(elf_aux_info sys/auxv.h HAVE_ELF_AUX_INFO)
tuklib_add_definition_if(liblzma HAVE_ELF_AUX_INFO)
# sysctlbyname("hw.optional.armv8_crc32", ...) is supported on Darwin
# (macOS, iOS, etc.). Note that sysctlbyname() is supported on FreeBSD,
# NetBSD, and possibly others too but the string is specific to
# Apple OSes. The C code is responsible for checking
# defined(__APPLE__) before using
# sysctlbyname("hw.optional.armv8_crc32", ...).
check_symbol_exists(sysctlbyname sys/sysctl.h HAVE_SYSCTLBYNAME)
tuklib_add_definition_if(liblzma HAVE_SYSCTLBYNAME)
endif()
endif()
# Symbol visibility support:
#
# The C_VISIBILITY_PRESET property takes care of adding the compiler
# option -fvisibility=hidden (or equivalent) if and only if it is supported.
#
# HAVE_VISIBILITY should always be defined to 0 or 1. It tells liblzma
# if __attribute__((__visibility__("default")))
# and __attribute__((__visibility__("hidden"))) are supported.
# Those are useful only when the compiler supports -fvisibility=hidden
# or such option so HAVE_VISIBILITY should be 1 only when both option and
# the attribute support are present. HAVE_VISIBILITY is ignored on Windows
# and Cygwin by the liblzma C code; __declspec(dllexport) is used instead.
#
# CMake's GenerateExportHeader module is too fancy since liblzma already
# has the necessary macros. Instead, check CMake's internal variable
# CMAKE_C_COMPILE_OPTIONS_VISIBILITY (it's the C-specific variant of
# CMAKE_<LANG>_COMPILE_OPTIONS_VISIBILITY) which contains the compiler
# command line option for visibility support. It's empty or unset when
# visibility isn't supported. (It was added to CMake 2.8.12 in the commit
# 0e9f4bc00c6b26f254e74063e4026ac33b786513 in 2013.) This way we don't
# set HAVE_VISIBILITY to 1 when visibility isn't actually supported.
if(BUILD_SHARED_LIBS AND CMAKE_C_COMPILE_OPTIONS_VISIBILITY)
set_target_properties(liblzma PROPERTIES C_VISIBILITY_PRESET hidden)
target_compile_definitions(liblzma PRIVATE HAVE_VISIBILITY=1)
else()
target_compile_definitions(liblzma PRIVATE HAVE_VISIBILITY=0)
endif()
if(WIN32)
if(BUILD_SHARED_LIBS)
# Add the Windows resource file for liblzma.dll.
target_sources(liblzma PRIVATE src/liblzma/liblzma_w32res.rc)
set_target_properties(liblzma PROPERTIES
LINK_DEPENDS "${CMAKE_CURRENT_SOURCE_DIR}/src/common/common_w32res.rc"
)
# Export the public API symbols with __declspec(dllexport).
target_compile_definitions(liblzma PRIVATE DLL_EXPORT)
if(NOT MSVC)
# Create a DEF file. The linker puts the ordinal numbers there
# too so the output from the linker isn't our final file.
target_link_options(liblzma PRIVATE
"-Wl,--output-def,liblzma.def.in")
# Remove the ordinal numbers from the DEF file so that
# no one will create an import library that links by ordinal
# instead of by name. We don't maintain a DEF file so the
# ordinal numbers aren't stable.
add_custom_command(TARGET liblzma POST_BUILD
COMMAND "${CMAKE_COMMAND}"
-DINPUT_FILE=liblzma.def.in
-DOUTPUT_FILE=liblzma.def
-P
"${CMAKE_CURRENT_SOURCE_DIR}/cmake/remove-ordinals.cmake"
BYPRODUCTS "liblzma.def"
VERBATIM)
endif()
else()
# Disable __declspec(dllimport) when linking against static liblzma.
target_compile_definitions(liblzma INTERFACE LZMA_API_STATIC)
endif()
elseif(BUILD_SHARED_LIBS AND SYMBOL_VERSIONING STREQUAL "linux")
# Note that adding link options doesn't affect static builds
# but HAVE_SYMBOL_VERSIONS_LINUX must not be used with static builds
# because it would put symbol versions into the static library which
# can cause problems. It's clearer if all symver related things are
# omitted when not building a shared library.
#
# NOTE: Set it explicitly to 1 to make it clear that versioning is
# done unconditionally in the C files.
target_compile_definitions(liblzma PRIVATE HAVE_SYMBOL_VERSIONS_LINUX=1)
target_link_options(liblzma PRIVATE
"-Wl,--version-script=${CMAKE_CURRENT_SOURCE_DIR}/src/liblzma/liblzma_linux.map"
)
set_target_properties(liblzma PROPERTIES
LINK_DEPENDS "${CMAKE_CURRENT_SOURCE_DIR}/src/liblzma/liblzma_linux.map"
)
elseif(BUILD_SHARED_LIBS AND SYMBOL_VERSIONING STREQUAL "generic")
target_link_options(liblzma PRIVATE
"-Wl,--version-script=${CMAKE_CURRENT_SOURCE_DIR}/src/liblzma/liblzma_generic.map"
)
set_target_properties(liblzma PROPERTIES
LINK_DEPENDS "${CMAKE_CURRENT_SOURCE_DIR}/src/liblzma/liblzma_generic.map"
)
endif()
set_target_properties(liblzma PROPERTIES
# At least for now the package versioning matches the rules used for
# shared library versioning (excluding development releases) so it is
# fine to use the package version here.
SOVERSION "${xz_VERSION_MAJOR}"
VERSION "${xz_VERSION}"
# It's liblzma.so or liblzma.dll, not libliblzma.so or lzma.dll.
# Avoid the name lzma.dll because it would conflict with LZMA SDK.
PREFIX ""
IMPORT_PREFIX ""
)
# Create liblzma-config-version.cmake.
#
# FIXME: SameMajorVersion is correct for stable releases but it is wrong
# for development releases where each release may have incompatible changes.
include(CMakePackageConfigHelpers)
write_basic_package_version_file(
"${CMAKE_CURRENT_BINARY_DIR}/liblzma-config-version.cmake"
VERSION "${liblzma_VERSION}"
COMPATIBILITY SameMajorVersion)
# Create liblzma-config.cmake. We use this spelling instead of
# liblzmaConfig.cmake to make find_package work in case insensitive
# manner even with case sensitive file systems. This gives more consistent
# behavior between operating systems. This optionally includes a dependency
# on a threading library, so the contents are created in two separate parts.
# The "second half" is always needed, so create it first.
set(LZMA_CONFIG_CONTENTS
"include(\"\${CMAKE_CURRENT_LIST_DIR}/liblzma-targets.cmake\")
if(NOT TARGET LibLZMA::LibLZMA)
# Be compatible with the spelling used by the FindLibLZMA module. This
# doesn't use ALIAS because it would make CMake resolve LibLZMA::LibLZMA
# to liblzma::liblzma instead of keeping the original spelling. Keeping
# the original spelling is important for good FindLibLZMA compatibility.
add_library(LibLZMA::LibLZMA INTERFACE IMPORTED)
set_target_properties(LibLZMA::LibLZMA PROPERTIES
INTERFACE_LINK_LIBRARIES liblzma::liblzma)
endif()
")
if(USE_POSIX_THREADS)
set(LZMA_CONFIG_CONTENTS
"include(CMakeFindDependencyMacro)
set(THREADS_PREFER_PTHREAD_FLAG TRUE)
find_dependency(Threads)
${LZMA_CONFIG_CONTENTS}
")
endif()
file(WRITE "${CMAKE_CURRENT_BINARY_DIR}/liblzma-config.cmake"
"${LZMA_CONFIG_CONTENTS}")
# Create liblzma.pc.
set(prefix "${CMAKE_INSTALL_PREFIX}")
set(exec_prefix "${CMAKE_INSTALL_PREFIX}")
set(libdir "${CMAKE_INSTALL_FULL_LIBDIR}")
set(includedir "${CMAKE_INSTALL_FULL_INCLUDEDIR}")
set(PTHREAD_CFLAGS "${CMAKE_THREAD_LIBS_INIT}")
configure_file(src/liblzma/liblzma.pc.in liblzma.pc
@ONLY
NEWLINE_STYLE LF)
# Install the library binary. The INCLUDES specifies the include path that
# is exported for other projects to use but it doesn't install any files.
install(TARGETS liblzma EXPORT liblzmaTargets
RUNTIME DESTINATION "${CMAKE_INSTALL_BINDIR}"
COMPONENT liblzma_Runtime
LIBRARY DESTINATION "${CMAKE_INSTALL_LIBDIR}"
COMPONENT liblzma_Runtime
NAMELINK_COMPONENT liblzma_Development
ARCHIVE DESTINATION "${CMAKE_INSTALL_LIBDIR}"
COMPONENT liblzma_Development
INCLUDES DESTINATION "${CMAKE_INSTALL_INCLUDEDIR}")
# Install the liblzma API headers. These use a subdirectory so
# this has to be done as a separate step.
install(DIRECTORY src/liblzma/api/
COMPONENT liblzma_Development
DESTINATION "${CMAKE_INSTALL_INCLUDEDIR}"
FILES_MATCHING PATTERN "*.h")
# Install the CMake files that other packages can use to find liblzma.
set(liblzma_INSTALL_CMAKEDIR
"${CMAKE_INSTALL_LIBDIR}/cmake/liblzma"
CACHE STRING "Path to liblzma's .cmake files")
install(EXPORT liblzmaTargets
NAMESPACE liblzma::
FILE liblzma-targets.cmake
DESTINATION "${liblzma_INSTALL_CMAKEDIR}"
COMPONENT liblzma_Development)
install(FILES "${CMAKE_CURRENT_BINARY_DIR}/liblzma-config.cmake"
"${CMAKE_CURRENT_BINARY_DIR}/liblzma-config-version.cmake"
DESTINATION "${liblzma_INSTALL_CMAKEDIR}"
COMPONENT liblzma_Development)
if(NOT MSVC)
install(FILES "${CMAKE_CURRENT_BINARY_DIR}/liblzma.pc"
DESTINATION "${CMAKE_INSTALL_LIBDIR}/pkgconfig"
COMPONENT liblzma_Development)
endif()
#############################################################################
# Helper functions for installing files
#############################################################################
# For each non-empty element in the list LINK_NAMES, creates symbolic links
# ${LINK_NAME}${LINK_SUFFIX} -> ${TARGET_NAME} in the directory ${DIR}.
# The target file should exist because on Cygwin and MSYS2 symlink creation
# can fail under certain conditions if the target doesn't exist.
function(my_install_symlinks COMPONENT DIR TARGET_NAME LINK_SUFFIX LINK_NAMES)
install(CODE "set(D \"\$ENV{DESTDIR}\${CMAKE_INSTALL_PREFIX}/${DIR}\")
foreach(L ${LINK_NAMES})
file(CREATE_LINK \"${TARGET_NAME}\"
\"\${D}/\${L}${LINK_SUFFIX}\"
SYMBOLIC)
endforeach()"
COMPONENT "${COMPONENT}")
endfunction()
# Installs a man page file of a given language ("" for the untranslated file)
# and optionally its alternative names as symlinks. This is a helper function
# for my_install_man() below.
function(my_install_man_lang COMPONENT SRC_FILE MAN_LANG LINK_NAMES)
# Get the man page section from the filename suffix.
string(REGEX REPLACE "^.*\.([^/.]+)$" "\\1" MAN_SECTION "${SRC_FILE}")
# A few man pages might be missing from translations.
# Don't attempt to install them or create the related symlinks.
if(NOT MAN_LANG STREQUAL "" AND NOT EXISTS "${SRC_FILE}")
return()
endif()
# Installing the file must be done before creating the symlinks
# due to Cygwin and MSYS2.
install(FILES "${SRC_FILE}"
DESTINATION "${CMAKE_INSTALL_MANDIR}/${MAN_LANG}/man${MAN_SECTION}"
COMPONENT "${COMPONENT}")
# Get the basename of the file to be used as the symlink target.
get_filename_component(BASENAME "${SRC_FILE}" NAME)
# LINK_NAMES don't contain the man page filename suffix (like ".1")
# so it needs to be told to my_install_symlinks.
my_install_symlinks("${COMPONENT}"
"${CMAKE_INSTALL_MANDIR}/${MAN_LANG}/man${MAN_SECTION}"
"${BASENAME}" ".${MAN_SECTION}" "${LINK_NAMES}")
endfunction()
# Installs a man page file and optionally its alternative names as symlinks.
# Does the same for translations if ENABLE_NLS.
function(my_install_man COMPONENT SRC_FILE LINK_NAMES)
my_install_man_lang("${COMPONENT}" "${SRC_FILE}" "" "${LINK_NAMES}")
if(ENABLE_NLS)
# Find the translated versions of this man page.
get_filename_component(BASENAME "${SRC_FILE}" NAME)
file(GLOB MAN_FILES "po4a/man/*/${BASENAME}")
foreach(F ${MAN_FILES})
get_filename_component(MAN_LANG "${F}" DIRECTORY)
get_filename_component(MAN_LANG "${MAN_LANG}" NAME)
my_install_man_lang("${COMPONENT}" "${F}" "${MAN_LANG}"
"${LINK_NAMES}")
endforeach()
endif()
endfunction()
#############################################################################
# libgnu (getopt_long)
#############################################################################
# This mirrors how the Autotools build system handles the getopt_long
# replacement, calling the object library libgnu since the replacement
# version comes from Gnulib.
add_library(libgnu OBJECT)
# CMake requires that even an object library must have at least once source
# file. So we give it a header file that results in no output files.
#
# NOTE: Using a file outside the lib directory makes it possible to
# delete lib/*.h and lib/*.c and still keep the build working if
# getopt_long replacement isn't needed. It's convenient if one wishes
# to be certain that no GNU LGPL code gets included in the binaries.
target_sources(libgnu PRIVATE src/common/sysdefs.h)
# The Ninja Generator requires setting the linker language since it cannot
# guess the programming language of just a header file. Setting this
# property avoids needing an empty .c file or an non-empty unnecessary .c
# file.
set_target_properties(libgnu PROPERTIES LINKER_LANGUAGE C)
# Create /lib directory in the build directory and add it to the include path.
file(MAKE_DIRECTORY "${CMAKE_CURRENT_BINARY_DIR}/lib")
target_include_directories(libgnu PUBLIC "${CMAKE_CURRENT_BINARY_DIR}/lib")
# Include /lib from the source directory. It does no harm even if none of
# the Gnulib replacements are used.
target_include_directories(libgnu PUBLIC lib)
# The command line tools need getopt_long in order to parse arguments. If
# the system does not have a getopt_long implementation we can use the one
# from Gnulib instead.
check_symbol_exists(getopt_long getopt.h HAVE_GETOPT_LONG)
if(NOT HAVE_GETOPT_LONG)
# Set the __GETOPT_PREFIX definition to "rpl_" (replacement) to avoid
# name conflicts with libc symbols. The same prefix is set if using
# the Autotools build (m4/getopt.m4).
target_compile_definitions(libgnu PUBLIC "__GETOPT_PREFIX=rpl_")
# Create a custom copy command to copy the getopt header to the build
# directory and re-copy it if it is updated. (Gnulib does it this way
# because it allows choosing which .in.h files to actually use in the
# build. We need just getopt.h so this is a bit overcomplicated for
# a single header file only.)
add_custom_command(OUTPUT "${CMAKE_CURRENT_BINARY_DIR}/lib/getopt.h"
COMMAND "${CMAKE_COMMAND}" -E copy
"${CMAKE_CURRENT_SOURCE_DIR}/lib/getopt.in.h"
"${CMAKE_CURRENT_BINARY_DIR}/lib/getopt.h"
MAIN_DEPENDENCY "${CMAKE_CURRENT_SOURCE_DIR}/lib/getopt.in.h"
VERBATIM)
target_sources(libgnu PRIVATE
lib/getopt1.c
lib/getopt.c
lib/getopt_int.h
lib/getopt-cdefs.h
lib/getopt-core.h
lib/getopt-ext.h
lib/getopt-pfx-core.h
lib/getopt-pfx-ext.h
"${CMAKE_CURRENT_BINARY_DIR}/lib/getopt.h"
)
endif()
#############################################################################
# xzdec and lzmadec
#############################################################################
if(HAVE_DECODERS AND (NOT MSVC OR MSVC_VERSION GREATER_EQUAL 1900))
foreach(XZDEC xzdec lzmadec)
add_executable("${XZDEC}"
src/common/sysdefs.h
src/common/tuklib_common.h
src/common/tuklib_config.h
src/common/tuklib_exit.c
src/common/tuklib_exit.h
src/common/tuklib_gettext.h
src/common/tuklib_progname.c
src/common/tuklib_progname.h
src/xzdec/xzdec.c
)
target_include_directories("${XZDEC}" PRIVATE
src/common
src/liblzma/api
)
target_link_libraries("${XZDEC}" PRIVATE liblzma libgnu)
if(WIN32)
# Add the Windows resource file for xzdec.exe or lzmadec.exe.
target_sources("${XZDEC}" PRIVATE src/xzdec/xzdec_w32res.rc)
set_target_properties("${XZDEC}" PROPERTIES
LINK_DEPENDS "${CMAKE_CURRENT_SOURCE_DIR}/src/common/common_w32res.rc"
)
endif()
if(SANDBOX_COMPILE_DEFINITION)
target_compile_definitions("${XZDEC}" PRIVATE
"${SANDBOX_COMPILE_DEFINITION}")
endif()
tuklib_progname("${XZDEC}")
install(TARGETS "${XZDEC}"
RUNTIME DESTINATION "${CMAKE_INSTALL_BINDIR}"
COMPONENT "${XZDEC}_Runtime")
endforeach()
# This is the only build-time difference with lzmadec.
target_compile_definitions(lzmadec PRIVATE "LZMADEC")
if(UNIX)
# NOTE: This puts the lzmadec.1 symlinks into xzdec_Documentation.
# This isn't great but doing them separately with translated
# man pages would require extra code. So this has to suffice for now.
my_install_man(xzdec_Documentation src/xzdec/xzdec.1 lzmadec)
endif()
endif()
#############################################################################
# lzmainfo
#############################################################################
if(HAVE_DECODERS AND (NOT MSVC OR MSVC_VERSION GREATER_EQUAL 1900))
add_executable(lzmainfo
src/common/sysdefs.h
src/common/tuklib_common.h
src/common/tuklib_config.h
src/common/tuklib_exit.c
src/common/tuklib_exit.h
src/common/tuklib_gettext.h
src/common/tuklib_progname.c
src/common/tuklib_progname.h
src/lzmainfo/lzmainfo.c
)
target_include_directories(lzmainfo PRIVATE
src/common
src/liblzma/api
)
target_link_libraries(lzmainfo PRIVATE liblzma libgnu)
if(WIN32)
# Add the Windows resource file for lzmainfo.exe.
target_sources(lzmainfo PRIVATE src/lzmainfo/lzmainfo_w32res.rc)
set_target_properties(lzmainfo PROPERTIES
LINK_DEPENDS "${CMAKE_CURRENT_SOURCE_DIR}/src/common/common_w32res.rc"
)
endif()
tuklib_progname(lzmainfo)
# NOTE: The translations are in the "xz" domain and the .mo files are
# installed as part of the "xz" target.
if(ENABLE_NLS)
target_link_libraries(lzmainfo PRIVATE Intl::Intl)
target_compile_definitions(lzmainfo PRIVATE
ENABLE_NLS
PACKAGE="${TRANSLATION_DOMAIN}"
LOCALEDIR="${LOCALEDIR_DEFINITION}"
)
endif()
install(TARGETS lzmainfo
RUNTIME DESTINATION "${CMAKE_INSTALL_BINDIR}"
COMPONENT lzmainfo_Runtime)
if(UNIX)
my_install_man(lzmainfo_Documentation src/lzmainfo/lzmainfo.1 "")
endif()
endif()
#############################################################################
# xz
#############################################################################
if(NOT MSVC OR MSVC_VERSION GREATER_EQUAL 1900)
add_executable(xz
src/common/mythread.h
src/common/sysdefs.h
src/common/tuklib_common.h
src/common/tuklib_config.h
src/common/tuklib_exit.c
src/common/tuklib_exit.h
src/common/tuklib_gettext.h
src/common/tuklib_integer.h
src/common/tuklib_mbstr.h
src/common/tuklib_mbstr_fw.c
src/common/tuklib_mbstr_width.c
src/common/tuklib_open_stdxxx.c
src/common/tuklib_open_stdxxx.h
src/common/tuklib_progname.c
src/common/tuklib_progname.h
src/xz/args.c
src/xz/args.h
src/xz/coder.c
src/xz/coder.h
src/xz/file_io.c
src/xz/file_io.h
src/xz/hardware.c
src/xz/hardware.h
src/xz/main.c
src/xz/main.h
src/xz/message.c
src/xz/message.h
src/xz/mytime.c
src/xz/mytime.h
src/xz/options.c
src/xz/options.h
src/xz/private.h
src/xz/sandbox.c
src/xz/sandbox.h
src/xz/signals.c
src/xz/signals.h
src/xz/suffix.c
src/xz/suffix.h
src/xz/util.c
src/xz/util.h
)
target_include_directories(xz PRIVATE
src/common
src/liblzma/api
)
if(HAVE_DECODERS)
target_sources(xz PRIVATE
src/xz/list.c
src/xz/list.h
)
endif()
target_link_libraries(xz PRIVATE liblzma libgnu)
target_compile_definitions(xz PRIVATE ASSUME_RAM=128)
if(WIN32)
# Add the Windows resource file for xz.exe.
target_sources(xz PRIVATE src/xz/xz_w32res.rc)
set_target_properties(xz PROPERTIES
LINK_DEPENDS "${CMAKE_CURRENT_SOURCE_DIR}/src/common/common_w32res.rc"
)
endif()
if(SANDBOX_COMPILE_DEFINITION)
target_compile_definitions(xz PRIVATE "${SANDBOX_COMPILE_DEFINITION}")
endif()
tuklib_progname(xz)
tuklib_mbstr(xz)
check_symbol_exists(optreset getopt.h HAVE_OPTRESET)
tuklib_add_definition_if(xz HAVE_OPTRESET)
check_symbol_exists(posix_fadvise fcntl.h HAVE_POSIX_FADVISE)
tuklib_add_definition_if(xz HAVE_POSIX_FADVISE)
# How to get file time:
check_struct_has_member("struct stat" st_atim.tv_nsec
"sys/types.h;sys/stat.h"
HAVE_STRUCT_STAT_ST_ATIM_TV_NSEC)
if(HAVE_STRUCT_STAT_ST_ATIM_TV_NSEC)
tuklib_add_definitions(xz HAVE_STRUCT_STAT_ST_ATIM_TV_NSEC)
else()
check_struct_has_member("struct stat" st_atimespec.tv_nsec
"sys/types.h;sys/stat.h"
HAVE_STRUCT_STAT_ST_ATIMESPEC_TV_NSEC)
if(HAVE_STRUCT_STAT_ST_ATIMESPEC_TV_NSEC)
tuklib_add_definitions(xz HAVE_STRUCT_STAT_ST_ATIMESPEC_TV_NSEC)
else()
check_struct_has_member("struct stat" st_atimensec
"sys/types.h;sys/stat.h"
HAVE_STRUCT_STAT_ST_ATIMENSEC)
tuklib_add_definition_if(xz HAVE_STRUCT_STAT_ST_ATIMENSEC)
endif()
endif()
# How to set file time:
check_symbol_exists(futimens "sys/types.h;sys/stat.h" HAVE_FUTIMENS)
if(HAVE_FUTIMENS)
tuklib_add_definitions(xz HAVE_FUTIMENS)
else()
check_symbol_exists(futimes "sys/time.h" HAVE_FUTIMES)
if(HAVE_FUTIMES)
tuklib_add_definitions(xz HAVE_FUTIMES)
else()
check_symbol_exists(futimesat "sys/time.h" HAVE_FUTIMESAT)
if(HAVE_FUTIMESAT)
tuklib_add_definitions(xz HAVE_FUTIMESAT)
else()
check_symbol_exists(utimes "sys/time.h" HAVE_UTIMES)
if(HAVE_UTIMES)
tuklib_add_definitions(xz HAVE_UTIMES)
else()
check_symbol_exists(_futime "sys/utime.h" HAVE__FUTIME)
if(HAVE__FUTIME)
tuklib_add_definitions(xz HAVE__FUTIME)
else()
check_symbol_exists(utime "utime.h" HAVE_UTIME)
tuklib_add_definition_if(xz HAVE_UTIME)
endif()
endif()
endif()
endif()
endif()
if(ENABLE_NLS)
target_link_libraries(xz PRIVATE Intl::Intl)
target_compile_definitions(xz PRIVATE
ENABLE_NLS
PACKAGE="${TRANSLATION_DOMAIN}"
LOCALEDIR="${LOCALEDIR_DEFINITION}"
)
file(STRINGS po/LINGUAS LINGUAS)
# Where to find .gmo files. If msgfmt is available, the .po files
# will be converted as part of the build. Otherwise we will use
# the pre-generated .gmo files which are included in XZ Utils
# tarballs by Autotools.
set(GMO_DIR "${CMAKE_CURRENT_SOURCE_DIR}/po")
if(GETTEXT_FOUND)
# NOTE: gettext_process_po_files' INSTALL_DESTINATION is
# incompatible with how Autotools requires the .po files to
# be named. CMake would require each .po file to be named with
# the translation domain and thus each .po file would need its
# own language-specific directory (like "po/fi/xz.po"). On top
# of this, INSTALL_DESTINATION doesn't allow specifying COMPONENT
# and thus the .mo files go into "Unspecified" component. So we
# can use gettext_process_po_files to convert the .po files but
# installation needs to be done with our own code.
#
# Also, the .gmo files will go to root of the build directory
# instead of neatly into a subdirectory. This is hardcoded in
# CMake's FindGettext.cmake.
foreach(LANG IN LISTS LINGUAS)
gettext_process_po_files("${LANG}" ALL
PO_FILES "${CMAKE_CURRENT_SOURCE_DIR}/po/${LANG}.po")
endforeach()
set(GMO_DIR "${CMAKE_CURRENT_BINARY_DIR}")
endif()
foreach(LANG IN LISTS LINGUAS)
install(
FILES "${GMO_DIR}/${LANG}.gmo"
DESTINATION "${CMAKE_INSTALL_LOCALEDIR}/${LANG}/LC_MESSAGES"
RENAME "${TRANSLATION_DOMAIN}.mo"
COMPONENT xz_Runtime)
endforeach()
endif()
# This command must be before the symlink creation to keep things working
# on Cygwin and MSYS2 in all cases.
#
# - Cygwin can encode symlinks in multiple ways. This can be
# controlled via the environment variable "CYGWIN". If it contains
# "winsymlinks:nativestrict" then symlink creation will fail if
# the link target doesn't exist. This mode isn't the default though.
# See: https://cygwin.com/faq.html#faq.api.symlinks
#
# - MSYS2 supports the same winsymlinks option in the environment
# variable "MSYS" (not "MSYS2). The default in MSYS2 is to make
# a copy of the file instead of any kind of symlink. Thus the link
# target must exist or the creation of the "symlink" (copy) will fail.
#
# Our installation order must be such that when a symbolic link is created
# its target must already exists. There is no race condition for parallel
# builds because the generated cmake_install.cmake executes serially.
install(TARGETS xz
RUNTIME DESTINATION "${CMAKE_INSTALL_BINDIR}"
COMPONENT xz_Runtime)
if(UNIX)
option(CREATE_XZ_SYMLINKS "Create unxz and xzcat symlinks" ON)
option(CREATE_LZMA_SYMLINKS "Create lzma, unlzma, and lzcat symlinks"
ON)
set(XZ_LINKS)
if(CREATE_XZ_SYMLINKS)
list(APPEND XZ_LINKS "unxz" "xzcat")
endif()
if(CREATE_LZMA_SYMLINKS)
list(APPEND XZ_LINKS "lzma" "unlzma" "lzcat")
endif()
# On Cygwin, don't add the .exe suffix to the symlinks.
#
# FIXME? Does this make sense on MSYS & MSYS2 where "ln -s"
# by default makes copies? Inside MSYS & MSYS2 it is possible
# to execute files without the .exe suffix but not outside
# (like in Command Prompt). Omitting the suffix matches
# what configure.ac has done for many years though.
my_install_symlinks(xz_Runtime "${CMAKE_INSTALL_BINDIR}"
"xz${CMAKE_EXECUTABLE_SUFFIX}" "" "${XZ_LINKS}")
# Install the man pages and (optionally) their symlinks
# and translations.
my_install_man(xz_Documentation src/xz/xz.1 "${XZ_LINKS}")
endif()
endif()
#############################################################################
# Scripts
#############################################################################
if(UNIX)
# NOTE: This isn't as sophisticated as in the Autotools build which
# uses posix-shell.m4 but hopefully this doesn't need to be either.
# CMake likely won't be used on as many (old) obscure systems as the
# Autotools-based builds are.
if(CMAKE_SYSTEM_NAME STREQUAL "SunOS" AND EXISTS "/usr/xpg4/bin/sh")
set(POSIX_SHELL_DEFAULT "/usr/xpg4/bin/sh")
else()
set(POSIX_SHELL_DEFAULT "/bin/sh")
endif()
set(POSIX_SHELL "${POSIX_SHELL_DEFAULT}" CACHE STRING
"Shell to use for scripts (xzgrep and others)")
# Guess the extra path to add from POSIX_SHELL. Autotools-based build
# has a separate option --enable-path-for-scripts=PREFIX but this is
# enough for Solaris.
set(enable_path_for_scripts)
get_filename_component(POSIX_SHELL_DIR "${POSIX_SHELL}" DIRECTORY)
if(NOT POSIX_SHELL_DIR STREQUAL "/bin" AND
NOT POSIX_SHELL_DIR STREQUAL "/usr/bin")
set(enable_path_for_scripts "PATH=${POSIX_SHELL_DIR}:\$PATH")
endif()
set(XZDIFF_LINKS xzcmp)
set(XZGREP_LINKS xzegrep xzfgrep)
set(XZMORE_LINKS)
set(XZLESS_LINKS)
if(CREATE_LZMA_SYMLINKS)
list(APPEND XZDIFF_LINKS lzdiff lzcmp)
list(APPEND XZGREP_LINKS lzgrep lzegrep lzfgrep)
list(APPEND XZMORE_LINKS lzmore)
list(APPEND XZLESS_LINKS lzless)
endif()
set(xz "xz")
foreach(S xzdiff xzgrep xzmore xzless)
configure_file("src/scripts/${S}.in" "${S}"
@ONLY
NEWLINE_STYLE LF)
install(PROGRAMS "${CMAKE_CURRENT_BINARY_DIR}/${S}"
DESTINATION "${CMAKE_INSTALL_BINDIR}"
COMPONENT scripts_Runtime)
endforeach()
# file(CHMOD ...) would need CMake 3.19 so use execute_process instead.
# Using +x is fine even if umask was 077. If execute bit is set at all
# then "make install" will set it for group and other access bits too.
execute_process(COMMAND chmod +x xzdiff xzgrep xzmore xzless
WORKING_DIRECTORY "${CMAKE_CURRENT_BINARY_DIR}")
unset(xz)
unset(POSIX_SHELL)
unset(enable_path_for_scripts)
my_install_symlinks(scripts_Runtime "${CMAKE_INSTALL_BINDIR}" xzdiff ""
"${XZDIFF_LINKS}")
my_install_symlinks(scripts_Runtime "${CMAKE_INSTALL_BINDIR}" xzgrep ""
"${XZGREP_LINKS}")
my_install_symlinks(scripts_Runtime "${CMAKE_INSTALL_BINDIR}" xzmore ""
"${XZMORE_LINKS}")
my_install_symlinks(scripts_Runtime "${CMAKE_INSTALL_BINDIR}" xzless ""
"${XZLESS_LINKS}")
my_install_man(scripts_Documentation src/scripts/xzdiff.1 "${XZDIFF_LINKS}")
my_install_man(scripts_Documentation src/scripts/xzgrep.1 "${XZGREP_LINKS}")
my_install_man(scripts_Documentation src/scripts/xzmore.1 "${XZMORE_LINKS}")
my_install_man(scripts_Documentation src/scripts/xzless.1 "${XZLESS_LINKS}")
endif()
#############################################################################
# Documentation
#############################################################################
if(UNIX)
option(ENABLE_DOXYGEN "Use Doxygen to generate liblzma API docs" OFF)
if (ENABLE_DOXYGEN)
file(MAKE_DIRECTORY "${CMAKE_CURRENT_BINARY_DIR}/doc")
add_custom_command(
VERBATIM
COMMAND "${CMAKE_CURRENT_SOURCE_DIR}/doxygen/update-doxygen"
ARGS "api"
"${CMAKE_CURRENT_SOURCE_DIR}"
"${CMAKE_CURRENT_BINARY_DIR}/doc"
OUTPUT doc/api/index.html
DEPENDS "${CMAKE_CURRENT_SOURCE_DIR}/doxygen/update-doxygen"
"${CMAKE_CURRENT_SOURCE_DIR}/doxygen/Doxyfile"
${LIBLZMA_API_HEADERS}
)
add_custom_target(
liblzma-doc-api ALL
DEPENDS "${CMAKE_CURRENT_BINARY_DIR}/doc/api/index.html"
)
install(DIRECTORY "${CMAKE_CURRENT_BINARY_DIR}/doc/api"
DESTINATION "${CMAKE_INSTALL_DOCDIR}"
COMPONENT liblzma_Documentation)
endif()
endif()
install(DIRECTORY doc/examples
DESTINATION "${CMAKE_INSTALL_DOCDIR}"
COMPONENT liblzma_Documentation)
# GPLv2 applies to the scripts. If GNU getopt_long is used then
# LGPLv2.1 applies to the command line tools but, using the
# section 3 of LGPLv2.1, GNU getopt_long can be handled as GPLv2 too.
# Thus GPLv2 should be enough here.
install(FILES AUTHORS
COPYING
COPYING.0BSD
COPYING.GPLv2
NEWS
README
THANKS
doc/faq.txt
doc/history.txt
doc/lzma-file-format.txt
doc/xz-file-format.txt
DESTINATION "${CMAKE_INSTALL_DOCDIR}"
COMPONENT Documentation)
#############################################################################
# Tests
#############################################################################
# Tests are in a separate file so that it's possible to delete the whole
# "tests" directory and still have a working build, just without the tests.
include(tests/tests.cmake OPTIONAL)
Reference in New Issue View Git Blame Copy Permalink