///////////////////////////////////////////////////////////////////////////////
//
/// \file       crc_clmul.c
/// \brief      CRC32 and CRC64 implementations using CLMUL instructions.
///
/// lzma_crc32_clmul() and lzma_crc64_clmul() use 32/64-bit x86
/// SSSE3, SSE4.1, and CLMUL instructions. This is compatible with
/// Elbrus 2000 (E2K) too.
///
/// They were derived from
/// https://www.researchgate.net/publication/263424619_Fast_CRC_computation
/// and the public domain code from https://github.com/rawrunprotected/crc
/// (URLs were checked on 2023-10-14).
///
/// FIXME: Builds for 32-bit x86 use the assembly .S files by default
/// unless configured with --disable-assembler. Even then the lookup table
/// isn't omitted in crc64_table.c since it doesn't know that assembly
/// code has been disabled.
//
//  Authors:    Ilya Kurdyukov
//              Hans Jansen
//              Lasse Collin
//              Jia Tan
//
//  This file has been put into the public domain.
//  You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////

#include "crc_common.h"
#include <immintrin.h>


// EDG-based compilers (Intel's classic compiler and compiler for E2K) can
// define __GNUC__ but the attribute must not be used with them.
// The new Clang-based ICX needs the attribute.
//
// NOTE: Build systems check for this too, keep them in sync with this.
#if (defined(__GNUC__) || defined(__clang__)) && !defined(__EDG__)
#	define crc_attr_target \
		__attribute__((__target__("ssse3,sse4.1,pclmul")))
#else
#	define crc_attr_target
#endif


#define MASK_L(in, mask, r) r = _mm_shuffle_epi8(in, mask)

#define MASK_H(in, mask, r) \
	r = _mm_shuffle_epi8(in, _mm_xor_si128(mask, vsign))

#define MASK_LH(in, mask, low, high) \
	MASK_L(in, mask, low); \
	MASK_H(in, mask, high)


crc_attr_target
crc_attr_no_sanitize_address
static crc_always_inline void
crc_simd_body(const uint8_t *buf, const size_t size, __m128i *v0, __m128i *v1,
		const __m128i vfold16, const __m128i initial_crc)
{
	// Create a vector with 8-bit values 0 to 15. This is used to
	// construct control masks for _mm_blendv_epi8 and _mm_shuffle_epi8.
	const __m128i vramp = _mm_setr_epi32(
			0x03020100, 0x07060504, 0x0b0a0908, 0x0f0e0d0c);

	// This is used to inverse the control mask of _mm_shuffle_epi8
	// so that bytes that wouldn't be picked with the original mask
	// will be picked and vice versa.
	const __m128i vsign = _mm_set1_epi8(-0x80);

	// Memory addresses A to D and the distances between them:
	//
	//     A           B     C         D
	//     [skip_start][size][skip_end]
	//     [     size2      ]
	//
	// A and D are 16-byte aligned. B and C are 1-byte aligned.
	// skip_start and skip_end are 0-15 bytes. size is at least 1 byte.
	//
	// A = aligned_buf will initially point to this address.
	// B = The address pointed by the caller-supplied buf.
	// C = buf + size == aligned_buf + size2
	// D = buf + size + skip_end == aligned_buf + size2 + skip_end
	const size_t skip_start = (size_t)((uintptr_t)buf & 15);
	const size_t skip_end = (size_t)((0U - (uintptr_t)(buf + size)) & 15);
	const __m128i *aligned_buf = (const __m128i *)(
			(uintptr_t)buf & ~(uintptr_t)15);

	// If size2 <= 16 then the whole input fits into a single 16-byte
	// vector. If size2 > 16 then at least two 16-byte vectors must
	// be processed. If size2 > 16 && size <= 16 then there is only
	// one 16-byte vector's worth of input but it is unaligned in memory.
	//
	// NOTE: There is no integer overflow here if the arguments
	// are valid. If this overflowed, buf + size would too.
	const size_t size2 = skip_start + size;

	// Masks to be used with _mm_blendv_epi8 and _mm_shuffle_epi8:
	// The first skip_start or skip_end bytes in the vectors will have
	// the high bit (0x80) set. _mm_blendv_epi8 and _mm_shuffle_epi8
	// will produce zeros for these positions. (Bitwise-xor of these
	// masks with vsign will produce the opposite behavior.)
	const __m128i mask_start
			= _mm_sub_epi8(vramp, _mm_set1_epi8((char)skip_start));
	const __m128i mask_end
			= _mm_sub_epi8(vramp, _mm_set1_epi8((char)skip_end));

	// Get the first 1-16 bytes into data0. If loading less than 16
	// bytes, the bytes are loaded to the high bits of the vector and
	// the least significant positions are filled with zeros.
	const __m128i data0 = _mm_blendv_epi8(_mm_load_si128(aligned_buf),
			_mm_setzero_si128(), mask_start);
	aligned_buf++;

	__m128i v2, v3;

#ifndef CRC_USE_GENERIC_FOR_SMALL_INPUTS
	if (size <= 16) {
		// Right-shift initial_crc by 1-16 bytes based on "size"
		// and store the result in v1 (high bytes) and v0 (low bytes).
		//
		// NOTE: The highest 8 bytes of initial_crc are zeros so
		// v1 will be filled with zeros if size >= 8. The highest
		// 8 bytes of v1 will always become zeros.
		//
		// [      v1      ][      v0      ]
		//  [ initial_crc  ]                  size == 1
		//   [ initial_crc  ]                 size == 2
		//                [ initial_crc  ]    size == 15
		//                 [ initial_crc  ]   size == 16 (all in v0)
		const __m128i mask_low = _mm_add_epi8(
				vramp, _mm_set1_epi8((char)(size - 16)));
		MASK_LH(initial_crc, mask_low, *v0, *v1);

		if (size2 <= 16) {
			// There are 1-16 bytes of input and it is all
			// in data0. Copy the input bytes to v3. If there
			// are fewer than 16 bytes, the low bytes in v3
			// will be filled with zeros. That is, the input
			// bytes are stored to the same position as
			// (part of) initial_crc is in v0.
			MASK_L(data0, mask_end, v3);
		} else {
			// There are 2-16 bytes of input but not all bytes
			// are in data0.
			const __m128i data1 = _mm_load_si128(aligned_buf);

			// Collect the 2-16 input bytes from data0 and data1
			// to v2 and v3, and bitwise-xor them with the
			// low bits of initial_crc in v0. Note that the
			// the second xor is below this else-block as it
			// is shared with the other branch.
			MASK_H(data0, mask_end, v2);
			MASK_L(data1, mask_end, v3);
			*v0 = _mm_xor_si128(*v0, v2);
		}

		*v0 = _mm_xor_si128(*v0, v3);
		*v1 = _mm_alignr_epi8(*v1, *v0, 8);
	} else
#endif
	{
		// There is more than 16 bytes of input.
		const __m128i data1 = _mm_load_si128(aligned_buf);
		const __m128i *end = (const __m128i*)(
				(const char *)aligned_buf - 16 + size2);
		aligned_buf++;

		MASK_LH(initial_crc, mask_start, *v0, *v1);
		*v0 = _mm_xor_si128(*v0, data0);
		*v1 = _mm_xor_si128(*v1, data1);

		while (aligned_buf < end) {
			*v1 = _mm_xor_si128(*v1, _mm_clmulepi64_si128(
					*v0, vfold16, 0x00));
			*v0 = _mm_xor_si128(*v1, _mm_clmulepi64_si128(
					*v0, vfold16, 0x11));
			*v1 = _mm_load_si128(aligned_buf++);
		}

		if (aligned_buf != end) {
			MASK_H(*v0, mask_end, v2);
			MASK_L(*v0, mask_end, *v0);
			MASK_L(*v1, mask_end, v3);
			*v1 = _mm_or_si128(v2, v3);
		}

		*v1 = _mm_xor_si128(*v1, _mm_clmulepi64_si128(
				*v0, vfold16, 0x00));
		*v0 = _mm_xor_si128(*v1, _mm_clmulepi64_si128(
				*v0, vfold16, 0x11));
		*v1 = _mm_srli_si128(*v0, 8);
	}
}


/////////////////////
// x86 CLMUL CRC32 //
/////////////////////

/*
// These functions were used to generate the constants
// at the top of lzma_crc32_clmul().
static uint64_t
calc_lo(uint64_t p, uint64_t a, int n)
{
	uint64_t b = 0; int i;
	for (i = 0; i < n; i++) {
		b = b >> 1 | (a & 1) << (n - 1);
		a = (a >> 1) ^ ((0 - (a & 1)) & p);
	}
	return b;
}

// same as ~crc(&a, sizeof(a), ~0)
static uint64_t
calc_hi(uint64_t p, uint64_t a, int n)
{
	int i;
	for (i = 0; i < n; i++)
		a = (a >> 1) ^ ((0 - (a & 1)) & p);
	return a;
}
*/

#ifdef HAVE_CHECK_CRC32

crc_attr_target
crc_attr_no_sanitize_address
extern uint32_t
lzma_crc32_clmul(const uint8_t *buf, size_t size, uint32_t crc)
{
#ifndef CRC_USE_GENERIC_FOR_SMALL_INPUTS
	// The code assumes that there is at least one byte of input.
	if (size == 0)
		return crc;
#endif

	// uint32_t poly = 0xedb88320;
	const int64_t p = 0x1db710640; // p << 1
	const int64_t mu = 0x1f7011641; // calc_lo(p, p, 32) << 1 | 1
	const int64_t k5 = 0x163cd6124; // calc_hi(p, p, 32) << 1
	const int64_t k4 = 0x0ccaa009e; // calc_hi(p, p, 64) << 1
	const int64_t k3 = 0x1751997d0; // calc_hi(p, p, 128) << 1

	const __m128i vfold4 = _mm_set_epi64x(mu, p);
	const __m128i vfold8 = _mm_set_epi64x(0, k5);
	const __m128i vfold16 = _mm_set_epi64x(k4, k3);

	__m128i v0, v1, v2;

	crc_simd_body(buf,  size, &v0, &v1, vfold16,
			_mm_cvtsi32_si128((int32_t)~crc));

	v1 = _mm_xor_si128(
			_mm_clmulepi64_si128(v0, vfold16, 0x10), v1); // xxx0
	v2 = _mm_shuffle_epi32(v1, 0xe7); // 0xx0
	v0 = _mm_slli_epi64(v1, 32);  // [0]
	v0 = _mm_clmulepi64_si128(v0, vfold8, 0x00);
	v0 = _mm_xor_si128(v0, v2);   // [1] [2]
	v2 = _mm_clmulepi64_si128(v0, vfold4, 0x10);
	v2 = _mm_clmulepi64_si128(v2, vfold4, 0x00);
	v0 = _mm_xor_si128(v0, v2);   // [2]
	return ~(uint32_t)_mm_extract_epi32(v0, 2);
}
#endif // HAVE_CHECK_CRC32


/////////////////////
// x86 CLMUL CRC64 //
/////////////////////

/*
// These functions were used to generate the constants
// at the top of lzma_crc64_clmul().
static uint64_t
calc_lo(uint64_t poly)
{
	uint64_t a = poly;
	uint64_t b = 0;

	for (unsigned i = 0; i < 64; ++i) {
		b = (b >> 1) | (a << 63);
		a = (a >> 1) ^ (a & 1 ? poly : 0);
	}

	return b;
}

static uint64_t
calc_hi(uint64_t poly, uint64_t a)
{
	for (unsigned i = 0; i < 64; ++i)
		a = (a >> 1) ^ (a & 1 ? poly : 0);

	return a;
}
*/

#ifdef HAVE_CHECK_CRC64

// MSVC (VS2015 - VS2022) produces bad 32-bit x86 code from the CLMUL CRC
// code when optimizations are enabled (release build). According to the bug
// report, the ebx register is corrupted and the calculated result is wrong.
// Trying to workaround the problem with "__asm mov ebx, ebx" didn't help.
// The following pragma works and performance is still good. x86-64 builds
// and CRC32 CLMUL aren't affected by this problem. The problem does not
// happen in crc_simd_body() either (which is shared with CRC32 CLMUL anyway).
//
// NOTE: Another pragma after lzma_crc64_clmul() restores the optimizations.
// If the #if condition here is updated, the other one must be updated too.
#if defined(_MSC_VER) && !defined(__INTEL_COMPILER) && !defined(__clang__) \
		&& defined(_M_IX86)
#	pragma optimize("g", off)
#endif

crc_attr_target
crc_attr_no_sanitize_address
extern uint64_t
lzma_crc64_clmul(const uint8_t *buf, size_t size, uint64_t crc)
{
#ifndef CRC_USE_GENERIC_FOR_SMALL_INPUTS
	// The code assumes that there is at least one byte of input.
	if (size == 0)
		return crc;
#endif

	// const uint64_t poly = 0xc96c5795d7870f42; // CRC polynomial
	const uint64_t p  = 0x92d8af2baf0e1e85; // (poly << 1) | 1
	const uint64_t mu = 0x9c3e466c172963d5; // (calc_lo(poly) << 1) | 1
	const uint64_t k2 = 0xdabe95afc7875f40; // calc_hi(poly, 1)
	const uint64_t k1 = 0xe05dd497ca393ae4; // calc_hi(poly, k2)

	const __m128i vfold8 = _mm_set_epi64x((int64_t)p, (int64_t)mu);
	const __m128i vfold16 = _mm_set_epi64x((int64_t)k2, (int64_t)k1);

	__m128i v0, v1, v2;

#if defined(__i386__) || defined(_M_IX86)
	crc_simd_body(buf,  size, &v0, &v1, vfold16,
			_mm_set_epi64x(0, (int64_t)~crc));
#else
	// GCC and Clang would produce good code with _mm_set_epi64x
	// but MSVC needs _mm_cvtsi64_si128 on x86-64.
	crc_simd_body(buf,  size, &v0, &v1, vfold16,
			_mm_cvtsi64_si128((int64_t)~crc));
#endif

	v1 = _mm_xor_si128(_mm_clmulepi64_si128(v0, vfold16, 0x10), v1);
	v0 = _mm_clmulepi64_si128(v1, vfold8, 0x00);
	v2 = _mm_clmulepi64_si128(v0, vfold8, 0x10);
	v0 = _mm_xor_si128(_mm_xor_si128(v1, _mm_slli_si128(v0, 8)), v2);

#if defined(__i386__) || defined(_M_IX86)
	return ~(((uint64_t)(uint32_t)_mm_extract_epi32(v0, 3) << 32) |
			(uint64_t)(uint32_t)_mm_extract_epi32(v0, 2));
#else
	return ~(uint64_t)_mm_extract_epi64(v0, 1);
#endif
}

#if defined(_MSC_VER) && !defined(__INTEL_COMPILER) && !defined(__clang__) \
		&& defined(_M_IX86)
#	pragma optimize("", on)
#endif

#endif // HAVE_CHECK_CRC64