/////////////////////////////////////////////////////////////////////////////// // /// \file tuktest.h /// \brief Helper macros for writing simple test programs /// \version 2023-01-08 /// /// Some inspiration was taken from Seatest by Keith Nicholas and /// from STest which is a fork of Seatest by Jia Tan. /// /// This is standard C99/C11 only and thus should be fairly portable /// outside POSIX systems too. /// /// This supports putting multiple tests in a single test program /// although it is perfectly fine to have only one test per program. /// Each test can produce one of these results: /// - Pass /// - Fail /// - Skip /// - Hard error (the remaining tests, if any, are not run) /// /// By default this produces an exit status that is compatible with /// Automake and Meson, and mostly compatible with CMake.[1] /// If a test program contains multiple tests, only one exit code can /// be returned. Of the following, the first match is used: /// - 99 if any test returned a hard error /// - stdlib.h's EXIT_FAILURE if at least one test failed /// - 77 if at least one test was skipped or no tests were run at all /// - stdlib.h's EXIT_SUCCESS (0 on POSIX); that is, if none of the above /// are true then there was at least one test to run and none of them /// failed, was skipped, or returned a hard error. /// /// A summary of tests being run and their results are printed to stdout. /// If you want ANSI coloring for the output, #define TUKTEST_COLOR. /// If you only want output when something goes wrong, #define TUKTEST_QUIET. /// /// The downside of the above mapping is that it cannot indicate if /// some tests were skipped and some passed. If that is likely to /// happen it may be better to split into multiple test programs (one /// test per program) or use the TAP mode described below. /// /// By using #define TUKTEST_TAP before #including this file the /// output will be Test Anything Protocol (TAP) version 12 compatible /// and the exit status will always be EXIT_SUCCESS. This can be easily /// used with Automake via its tap-driver.sh. Meson supports TAP natively. /// TAP's todo-directive isn't supported for now, mostly because it's not /// trivially convertible to the exit-status reporting method. /// /// If TUKTEST_TAP is used, TUKTEST_QUIET and TUKTEST_COLOR are ignored. /// /// The main() function may look like this (remember to include config.h /// or such files too if needed!): /// /// #include "tuktest.h" /// /// int main(int argc, char **argv) /// { /// tuktest_start(argc, argv); /// /// if (!is_package_foo_available()) /// tuktest_early_skip("Optional package foo is not available"); /// /// if (!do_common_initializations()) /// tuktest_error("Error during common initializations"); /// /// tuktest_run(testfunc1); /// tuktest_run(testfunc2); /// /// return tuktest_end(); /// } /// /// Using exit(tuktest_end()) as a pair to tuktest_start() is OK too. /// /// Each test function called via tuktest_run() should be of type /// "void testfunc1(void)". The test functions should use the /// various assert_CONDITION() macros. The current test stops if /// an assertion fails (this is implemented with setjmp/longjmp). /// Execution continues from the next test unless the failure was /// due to assert_error() (indicating a hard error) which makes /// the program exit() without running any remaining tests. /// /// Search for "define assert" in this file to find the explanations /// of the available assertion macros. /// /// IMPORTANT: /// /// - The assert_CONDITION() macros may only be used by code that is /// called via tuktest_run()! This includes the function named in /// the tuktest_run() call and functions called further from there. /// (The assert_CONDITION() macros depend on setup code in tuktest_run() /// and other use results in undefined behavior.) /// /// - tuktest_start(), tuktest_early_skip, tuktest_run(), and tuktest_end() /// must not be used in the tests called via tuktest_run()! (tuktest_end() /// is called more freely internally by this file but such use isn't part /// of the API.) /// /// - tuktest_error(), tuktest_malloc(), tuktest_free(), /// tuktest_file_from_srcdir(), and tuktest_file_from_builddir() /// can be used everywhere after tuktest_start() has been called. /// (In tests running under tuktest_run(), assert_error() can be used /// instead of tuktest_error() when a hard error occurs.) /// /// - Everything else is for internal use only. /// /// Footnotes: /// /// [1] As of 2022-06-02: /// See the Automake manual "info (automake)Scripts-based Testsuites" or: /// https://www.gnu.org/software/automake/manual/automake.html#Scripts_002dbased-Testsuites /// /// Meson: https://mesonbuild.com/Unit-tests.html /// /// CMake handles passing and failing tests by default but treats hard /// errors as regular fails. To make CMake support skipped tests /// correctly, one has to set the SKIP_RETURN_CODE property for each test: /// /// set_tests_properties(foo_test_name PROPERTIES SKIP_RETURN_CODE 77) /// /// See: /// https://cmake.org/cmake/help/latest/command/set_tests_properties.html /// https://cmake.org/cmake/help/latest/prop_test/SKIP_RETURN_CODE.html // // Author: Lasse Collin // // This file has been put into the public domain. // You can do whatever you want with this file. // /////////////////////////////////////////////////////////////////////////////// #ifndef TUKTEST_H #define TUKTEST_H #include // On some (too) old systems inttypes.h doesn't exist or isn't good enough. // Include it conditionally so that any portability tricks can be done before // tuktest.h is included. On any modern system inttypes.h is fine as is. #ifndef PRIu64 # include #endif #include #include #include #include #if defined(__GNUC__) && defined(__GNUC_MINOR__) # define TUKTEST_GNUC_REQ(major, minor) \ ((__GNUC__ == (major) && __GNUC_MINOR__ >= (minor)) \ || __GNUC__ > (major)) #else # define TUKTEST_GNUC_REQ(major, minor) 0 #endif // This is silencing warnings about unused functions. Not all test programs // need all functions from this header. #if TUKTEST_GNUC_REQ(3, 0) # define tuktest_maybe_unused __attribute__((__unused__)) #else # define tuktest_maybe_unused #endif // We need printf("") so silence the warning about empty format string. #if TUKTEST_GNUC_REQ(4, 2) # pragma GCC diagnostic ignored "-Wformat-zero-length" #endif // Types and printf format macros to use in integer assertions and also for // printing size_t values (C99's %zu isn't available on very old systems). typedef int64_t tuktest_int; typedef uint64_t tuktest_uint; #define TUKTEST_PRId PRId64 #define TUKTEST_PRIu PRIu64 #define TUKTEST_PRIX PRIX64 // When TAP mode isn't used, Automake-compatible exit statuses are used. #define TUKTEST_EXIT_PASS EXIT_SUCCESS #define TUKTEST_EXIT_FAIL EXIT_FAILURE #define TUKTEST_EXIT_SKIP 77 #define TUKTEST_EXIT_ERROR 99 enum tuktest_result { TUKTEST_PASS, TUKTEST_FAIL, TUKTEST_SKIP, TUKTEST_ERROR, }; #ifdef TUKTEST_TAP # undef TUKTEST_QUIET # undef TUKTEST_COLOR # undef TUKTEST_TAP # define TUKTEST_TAP 1 # define TUKTEST_STR_PASS "ok -" # define TUKTEST_STR_FAIL "not ok -" # define TUKTEST_STR_SKIP "ok - # SKIP" # define TUKTEST_STR_ERROR "Bail out!" #else # define TUKTEST_TAP 0 # ifdef TUKTEST_COLOR # define TUKTEST_COLOR_PASS "\x1B[0;32m" # define TUKTEST_COLOR_FAIL "\x1B[0;31m" # define TUKTEST_COLOR_SKIP "\x1B[1;34m" # define TUKTEST_COLOR_ERROR "\x1B[0;35m" # define TUKTEST_COLOR_TOTAL "\x1B[1m" # define TUKTEST_COLOR_OFF "\x1B[m" # define TUKTEST_COLOR_IF(cond, color) ((cond) ? (color) : "" ) # else # define TUKTEST_COLOR_PASS "" # define TUKTEST_COLOR_FAIL "" # define TUKTEST_COLOR_SKIP "" # define TUKTEST_COLOR_ERROR "" # define TUKTEST_COLOR_TOTAL "" # define TUKTEST_COLOR_OFF "" # define TUKTEST_COLOR_IF(cond, color) "" # endif # define TUKTEST_COLOR_ADD(str, color) color str TUKTEST_COLOR_OFF # define TUKTEST_STR_PASS \ TUKTEST_COLOR_ADD("PASS:", TUKTEST_COLOR_PASS) # define TUKTEST_STR_FAIL \ TUKTEST_COLOR_ADD("FAIL:", TUKTEST_COLOR_FAIL) # define TUKTEST_STR_SKIP \ TUKTEST_COLOR_ADD("SKIP:", TUKTEST_COLOR_SKIP) # define TUKTEST_STR_ERROR \ TUKTEST_COLOR_ADD("ERROR:", TUKTEST_COLOR_ERROR) #endif // NOTE: If TUKTEST_TAP is defined then TUKTEST_QUIET will get undefined above. #ifndef TUKTEST_QUIET # define TUKTEST_QUIET 0 #else # undef TUKTEST_QUIET # define TUKTEST_QUIET 1 #endif // Counts of the passed, failed, skipped, and hard-errored tests. // This is indexed with the enumeration constants from enum tuktest_result. static unsigned tuktest_stats[4] = { 0, 0, 0, 0 }; // Copy of argc and argv from main(). These are set by tuktest_start(). static int tuktest_argc = 0; static char **tuktest_argv = NULL; // Name of the currently-running test. This exists because it's nice // to print the main test function name even if the failing test-assertion // fails in a function called by the main test function. static const char *tuktest_name = NULL; // longjmp() target for when a test-assertion fails. static jmp_buf tuktest_jmpenv; // This declaration is needed for tuktest_malloc(). static int tuktest_end(void); // Internal helper for handling hard errors both inside and // outside tuktest_run(). #define tuktest_error_impl(filename, line, ...) \ do { \ tuktest_print_result_prefix(TUKTEST_ERROR, filename, line); \ printf(__VA_ARGS__); \ printf("\n"); \ ++tuktest_stats[TUKTEST_ERROR]; \ exit(tuktest_end()); \ } while (0) // printf() is without checking its return value in many places. This function // is called before exiting to check the status of stdout and catch errors. static void tuktest_catch_stdout_errors(void) { if (ferror(stdout) || fclose(stdout)) { fputs("Error while writing to stdout\n", stderr); exit(TUKTEST_EXIT_ERROR); } } // A simplified basename()-like function that is good enough for // cleaning up __FILE__. This supports / and \ as path separator. // If the path separator is wrong then the full path will be printed; // it's a cosmetic problem only. static const char * tuktest_basename(const char *filename) { for (const char *p = filename + strlen(filename); p > filename; --p) if (*p == '/' || *p == '\\') return p + 1; return filename; } // Internal helper that prints the prefix of the fail/skip/error message line. static void tuktest_print_result_prefix(enum tuktest_result result, const char *filename, unsigned line) { // This is never called with TUKTEST_PASS but I kept it here anyway. const char *result_str = result == TUKTEST_PASS ? TUKTEST_STR_PASS : result == TUKTEST_FAIL ? TUKTEST_STR_FAIL : result == TUKTEST_SKIP ? TUKTEST_STR_SKIP : TUKTEST_STR_ERROR; const char *short_filename = tuktest_basename(filename); if (tuktest_name != NULL) printf("%s %s [%s:%u] ", result_str, tuktest_name, short_filename, line); else printf("%s [%s:%u] ", result_str, short_filename, line); } // An entry for linked list of memory allocations. struct tuktest_malloc_record { struct tuktest_malloc_record *next; void *p; }; // Linked list of per-test allocations. This is used when under tuktest_run(). // These allocations are freed in tuktest_run() and, in case of a hard error, // also in tuktest_end(). static struct tuktest_malloc_record *tuktest_malloc_test = NULL; // Linked list of global allocations. This is used allocations are made // outside tuktest_run(). These are freed in tuktest_end(). static struct tuktest_malloc_record *tuktest_malloc_global = NULL; /// A wrapper for malloc() that never return NULL and the allocated memory is /// automatically freed at the end of tuktest_run() (if allocation was done /// within a test) or early in tuktest_end() (if allocation was done outside /// tuktest_run()). /// /// If allocation fails, a hard error is reported and this function won't /// return. Possible other tests won't be run (this will call exit()). #define tuktest_malloc(size) tuktest_malloc_impl(size, __FILE__, __LINE__) static void * tuktest_malloc_impl(size_t size, const char *filename, unsigned line) { void *p = malloc(size == 0 ? 1 : size); struct tuktest_malloc_record *r = malloc(sizeof(*r)); if (p == NULL || r == NULL) { free(r); free(p); // Avoid %zu for portability to very old systems that still // can compile C99 code. tuktest_error_impl(filename, line, "tuktest_malloc(%" TUKTEST_PRIu ") failed", (tuktest_uint)size); } r->p = p; if (tuktest_name == NULL) { // We were called outside tuktest_run(). r->next = tuktest_malloc_global; tuktest_malloc_global = r; } else { // We were called under tuktest_run(). r->next = tuktest_malloc_test; tuktest_malloc_test = r; } return p; } /// Frees memory allocated using tuktest_malloc(). Usually this isn't needed /// as the memory is freed automatically. /// /// NULL is silently ignored. /// /// NOTE: Under tuktest_run() only memory allocated there can be freed. /// That is, allocations done outside tuktest_run() can only be freed /// outside tuktest_run(). #define tuktest_free(ptr) tuktest_free_impl(ptr, __FILE__, __LINE__) static void tuktest_free_impl(void *p, const char *filename, unsigned line) { if (p == NULL) return; struct tuktest_malloc_record **r = tuktest_name != NULL ? &tuktest_malloc_test : &tuktest_malloc_global; while (*r != NULL) { struct tuktest_malloc_record *tmp = *r; if (tmp->p == p) { *r = tmp->next; free(p); free(tmp); return; } r = &tmp->next; } tuktest_error_impl(filename, line, "tuktest_free: " "Allocation matching the pointer was not found"); } // Frees all allocates in the given record list. The argument must be // either &tuktest_malloc_test or &tuktest_malloc_global. static void tuktest_free_all(struct tuktest_malloc_record **r) { while (*r != NULL) { struct tuktest_malloc_record *tmp = *r; *r = tmp->next; free(tmp->p); free(tmp); } } /// Initialize the test framework. No other functions or macros /// from this file may be called before calling this. /// /// If the arguments from main() aren't available, use 0 and NULL. /// If these are set, then only a subset of tests can be run by /// specifying their names on the command line. #define tuktest_start(argc, argv) \ do { \ tuktest_argc = argc; \ tuktest_argv = argv; \ if (!TUKTEST_TAP && !TUKTEST_QUIET) \ printf("=== %s ===\n", tuktest_basename(__FILE__)); \ } while (0) /// If it can be detected early that no tests can be run, this macro can /// be called after tuktest_start() but before any tuktest_run() to print /// a reason why the tests were skipped. Note that this macro calls exit(). /// /// Using "return tuktest_end();" in main() when no tests were run has /// the same result as tuktest_early_skip() except that then no reason /// for the skipping can be printed. #define tuktest_early_skip(...) \ do { \ printf("%s [%s:%u] ", \ TUKTEST_TAP ? "1..0 # SKIP" : TUKTEST_STR_SKIP, \ tuktest_basename(__FILE__), __LINE__); \ printf(__VA_ARGS__); \ printf("\n"); \ if (!TUKTEST_TAP && !TUKTEST_QUIET) \ printf("=== END ===\n"); \ tuktest_catch_stdout_errors(); \ exit(TUKTEST_TAP ? EXIT_SUCCESS : TUKTEST_EXIT_SKIP); \ } while (0) /// Some test programs need to do initializations before or between /// calls to tuktest_run(). If such initializations unexpectedly fail, /// tuktest_error() can be used to report it as a hard error outside /// test functions, for example, in main(). Then the remaining tests /// won't be run (this macro calls exit()). /// /// Typically tuktest_error() would be used before any tuktest_run() /// calls but it is also possible to use tuktest_error() after one or /// more tests have been run with tuktest_run(). This is in contrast to /// tuktest_early_skip() which must never be called after tuktest_run(). /// /// NOTE: tuktest_start() must have been called before tuktest_error(). /// /// NOTE: This macro can be called from test functions running under /// tuktest_run() but assert_error() is somewhat preferred in that context. #define tuktest_error(...) tuktest_error_impl(__FILE__, __LINE__, __VA_ARGS__) /// At the end of main() one should have "return tuktest_end();" which /// prints the stats or the TAP plan, and handles the exit status. /// Using exit(tuktest_end()) is OK too. /// /// If the test program can detect early that all tests must be skipped, /// then tuktest_early_skip() may be useful so that the reason why the /// tests were skipped can be printed. static int tuktest_end(void) { tuktest_free_all(&tuktest_malloc_test); tuktest_free_all(&tuktest_malloc_global); unsigned total_tests = 0; for (unsigned i = 0; i <= TUKTEST_ERROR; ++i) total_tests += tuktest_stats[i]; if (tuktest_stats[TUKTEST_ERROR] == 0 && tuktest_argc > 1 && (unsigned)(tuktest_argc - 1) > total_tests) { printf(TUKTEST_STR_ERROR " Fewer tests were run than " "specified on the command line. " "Was a test name mistyped?\n"); ++tuktest_stats[TUKTEST_ERROR]; } #if TUKTEST_TAP // Print the plan only if no "Bail out!" has occurred. // Print the skip directive if no tests were run. // We cannot know the reason for the skip here though // (see tuktest_early_skip()). if (tuktest_stats[TUKTEST_ERROR] == 0) printf("1..%u%s\n", total_tests, total_tests == 0 ? " # SKIP" : ""); tuktest_catch_stdout_errors(); return EXIT_SUCCESS; #else if (!TUKTEST_QUIET) printf("---\n" "%s# TOTAL: %u" TUKTEST_COLOR_OFF "\n" "%s# PASS: %u" TUKTEST_COLOR_OFF "\n" "%s# SKIP: %u" TUKTEST_COLOR_OFF "\n" "%s# FAIL: %u" TUKTEST_COLOR_OFF "\n" "%s# ERROR: %u" TUKTEST_COLOR_OFF "\n" "=== END ===\n", TUKTEST_COLOR_TOTAL, total_tests, TUKTEST_COLOR_IF( tuktest_stats[TUKTEST_PASS] > 0, TUKTEST_COLOR_PASS), tuktest_stats[TUKTEST_PASS], TUKTEST_COLOR_IF( tuktest_stats[TUKTEST_SKIP] > 0, TUKTEST_COLOR_SKIP), tuktest_stats[TUKTEST_SKIP], TUKTEST_COLOR_IF( tuktest_stats[TUKTEST_FAIL] > 0, TUKTEST_COLOR_FAIL), tuktest_stats[TUKTEST_FAIL], TUKTEST_COLOR_IF( tuktest_stats[TUKTEST_ERROR] > 0, TUKTEST_COLOR_ERROR), tuktest_stats[TUKTEST_ERROR]); tuktest_catch_stdout_errors(); if (tuktest_stats[TUKTEST_ERROR] > 0) return TUKTEST_EXIT_ERROR; if (tuktest_stats[TUKTEST_FAIL] > 0) return TUKTEST_EXIT_FAIL; if (tuktest_stats[TUKTEST_SKIP] > 0 || total_tests == 0) return TUKTEST_EXIT_SKIP; return TUKTEST_EXIT_PASS; #endif } /// Runs the specified test function. Requires that tuktest_start() /// has already been called and that tuktest_end() has NOT been called yet. #define tuktest_run(testfunc) \ tuktest_run_test(&(testfunc), #testfunc) tuktest_maybe_unused static void tuktest_run_test(void (*testfunc)(void), const char *testfunc_str) { // If any command line arguments were given, only the test functions // named on the command line will be run. if (tuktest_argc > 1) { int i = 1; while (strcmp(tuktest_argv[i], testfunc_str) != 0) if (++i == tuktest_argc) return; } // This is set so that failed assertions can print the correct // test name even when the assertion is in a helper function // called by the test function. tuktest_name = testfunc_str; // The way setjmp() may be called is very restrictive. // A switch statement is one of the few conforming ways // to get the value passed to longjmp(); doing something // like "int x = setjmp(env)" is NOT allowed (undefined behavior). switch (setjmp(tuktest_jmpenv)) { case 0: testfunc(); ++tuktest_stats[TUKTEST_PASS]; if (!TUKTEST_QUIET) printf(TUKTEST_STR_PASS " %s\n", tuktest_name); break; case TUKTEST_FAIL: ++tuktest_stats[TUKTEST_FAIL]; break; case TUKTEST_SKIP: ++tuktest_stats[TUKTEST_SKIP]; break; default: ++tuktest_stats[TUKTEST_ERROR]; exit(tuktest_end()); } tuktest_free_all(&tuktest_malloc_test); tuktest_name = NULL; } // Maximum allowed file size in tuktest_file_from_* macros and functions. #ifndef TUKTEST_FILE_SIZE_MAX # define TUKTEST_FILE_SIZE_MAX (64L << 20) #endif /// Allocates memory and reads the specified file into a buffer. /// If the environment variable srcdir is set, it will be prefixed /// to the filename. Otherwise the filename is used as is (and so /// the behavior is identical to tuktest_file_from_builddir() below). /// /// On success the a pointer to malloc'ed memory is returned. /// The size of the allocation and the file is stored in *size. /// /// If anything goes wrong, a hard error is reported and this function /// won't return. Possible other tests won't be run (this will call exit()). /// /// Empty files and files over TUKTEST_FILE_SIZE_MAX are rejected. /// The assumption is that something is wrong in these cases. /// /// This function can be called either from outside the tests (like in main()) /// or from tests run via tuktest_run(). Remember to free() the memory to /// keep Valgrind happy. #define tuktest_file_from_srcdir(filename, sizeptr) \ tuktest_file_from_x(getenv("srcdir"), filename, sizeptr, \ __FILE__, __LINE__) /// Like tuktest_file_from_srcdir except this reads from the current directory. #define tuktest_file_from_builddir(filename, sizeptr) \ tuktest_file_from_x(NULL, filename, sizeptr, __FILE__, __LINE__) // Internal helper for the macros above. tuktest_maybe_unused static void * tuktest_file_from_x(const char *prefix, const char *filename, size_t *size, const char *prog_filename, unsigned prog_line) { // If needed: buffer for holding prefix + '/' + filename + '\0'. char *alloc_name = NULL; // Buffer for the data read from the file. void *buf = NULL; // File being read FILE *f = NULL; // Error message to use under the "error:" label. const char *error_msg = NULL; if (filename == NULL) { error_msg = "Filename is NULL"; filename = "(NULL)"; goto error; } if (filename[0] == '\0') { error_msg = "Filename is an empty string"; filename = "(empty string)"; goto error; } if (size == NULL) { error_msg = "The size argument is NULL"; goto error; } // If a prefix was given, construct the full filename. if (prefix != NULL && prefix[0] != '\0') { const size_t prefix_len = strlen(prefix); const size_t filename_len = strlen(filename); const size_t alloc_name_size = prefix_len + 1 + filename_len + 1; alloc_name = tuktest_malloc_impl(alloc_name_size, prog_filename, prog_line); memcpy(alloc_name, prefix, prefix_len); alloc_name[prefix_len] = '/'; memcpy(alloc_name + prefix_len + 1, filename, filename_len); alloc_name[prefix_len + 1 + filename_len] = '\0'; // Set filename to point to the new string. alloc_name // can be freed unconditionally as it is NULL if a prefix // wasn't specified. filename = alloc_name; } f = fopen(filename, "rb"); if (f == NULL) { error_msg = "Failed to open the file"; goto error; } // Get the size of the file and store it in *size. // // We assume that the file isn't big and even reject very big files. // There is no need to use fseeko/ftello from POSIX to support // large files. Using standard C functions is portable outside POSIX. if (fseek(f, 0, SEEK_END) != 0) { error_msg = "Seeking failed (fseek end)"; goto error; } const long end = ftell(f); if (end < 0) { error_msg = "Seeking failed (ftell)"; goto error; } if (end == 0) { error_msg = "File is empty"; goto error; } if (end > TUKTEST_FILE_SIZE_MAX) { error_msg = "File size exceeds TUKTEST_FILE_SIZE_MAX"; goto error; } *size = (size_t)end; rewind(f); buf = tuktest_malloc_impl(*size, prog_filename, prog_line); const size_t amount = fread(buf, 1, *size, f); if (ferror(f)) { error_msg = "Read error"; goto error; } if (amount != *size) { error_msg = "File is smaller than indicated by ftell()"; goto error; } const int fclose_ret = fclose(f); f = NULL; if (fclose_ret != 0) { error_msg = "Error closing the file"; goto error; } tuktest_free(alloc_name); return buf; error: if (f != NULL) (void)fclose(f); tuktest_error_impl(prog_filename, prog_line, "tuktest_file_from_x: %s: %s\n", filename, error_msg); } // Internal helper for assert_fail, assert_skip, and assert_error. #define tuktest_print_and_jump(result, ...) \ do { \ tuktest_print_result_prefix(result, __FILE__, __LINE__); \ printf(__VA_ARGS__); \ printf("\n"); \ longjmp(tuktest_jmpenv, result); \ } while (0) /// Unconditionally fails the test (non-zero exit status if not using TAP). /// Execution will continue from the next test. /// /// A printf format string is supported. /// If no extra message is wanted, use "" as the argument. #define assert_fail(...) tuktest_print_and_jump(TUKTEST_FAIL, __VA_ARGS__) /// Skips the test (exit status 77 if not using TAP). /// Execution will continue from the next test. /// /// If you can detect early that no tests can be run, tuktest_early_skip() /// might be a better way to skip the test(s). Especially in TAP mode this /// makes a difference as with assert_skip() it will list a skipped specific /// test name but with tuktest_early_skip() it will indicate that the whole /// test program was skipped (with tuktest_early_skip() the TAP plan will /// indicate zero tests). /// /// A printf format string is supported. /// If no extra message is wanted, use "" as the argument. #define assert_skip(...) tuktest_print_and_jump(TUKTEST_SKIP, __VA_ARGS__) /// Hard error (exit status 99 if not using TAP). /// The remaining tests in this program will not be run or reported. /// /// A printf format string is supported. /// If no extra message is wanted, use "" as the argument. #define assert_error(...) tuktest_print_and_jump(TUKTEST_ERROR, __VA_ARGS__) /// Fails the test if the test expression doesn't evaluate to false. #define assert_false(test_expr) \ do { \ if (test_expr) \ assert_fail("assert_fail: '%s' is true but should be false", \ #test_expr); \ } while (0) /// Fails the test if the test expression doesn't evaluate to true. #define assert_true(test_expr) \ do { \ if (!(test_expr)) \ assert_fail("assert_true: '%s' is false but should be true", \ #test_expr); \ } while (0) /// Fails the test if comparing the signed integer expressions using the /// specified comparison operator evaluates to false. For example, /// assert_int(foobar(), >=, 0) fails the test if 'foobar() >= 0' isn't true. /// For good error messages, the first argument should be the test expression /// and the third argument the reference value (usually a constant). /// /// For equality (==) comparison there is a assert_int_eq() which /// might be more convenient to use. #define assert_int(test_expr, cmp_op, ref_value) \ do { \ const tuktest_int v_test_ = (test_expr); \ const tuktest_int v_ref_ = (ref_value); \ if (!(v_test_ cmp_op v_ref_)) \ assert_fail("assert_int: '%s == %" TUKTEST_PRId \ "' but expected '... %s %" TUKTEST_PRId "'", \ #test_expr, v_test_, #cmp_op, v_ref_); \ } while (0) /// Like assert_int() but for unsigned integers. /// /// For equality (==) comparison there is a assert_uint_eq() which /// might be more convenient to use. #define assert_uint(test_expr, cmp_op, ref_value) \ do { \ const tuktest_uint v_test_ = (test_expr); \ const tuktest_uint v_ref_ = (ref_value); \ if (!(v_test_ cmp_op v_ref_)) \ assert_fail("assert_uint: '%s == %" TUKTEST_PRIu \ "' but expected '... %s %" TUKTEST_PRIu "'", \ #test_expr, v_test_, #cmp_op, v_ref_); \ } while (0) /// Fails the test if test expression doesn't equal the expected /// signed integer value. #define assert_int_eq(test_expr, ref_value) \ assert_int(test_expr, ==, ref_value) /// Fails the test if test expression doesn't equal the expected /// unsigned integer value. #define assert_uint_eq(test_expr, ref_value) \ assert_uint(test_expr, ==, ref_value) /// Fails the test if the test expression doesn't equal the expected /// enumeration value. This is like assert_int_eq() but the error message /// shows the enumeration constant names instead of their numeric values /// as long as the values are non-negative and not big. /// /// The third argument must be a table of string pointers. A pointer to /// a pointer doesn't work because this determines the number of elements /// in the array using sizeof. For example: /// /// const char *my_enum_names[] = { "MY_FOO", "MY_BAR", "MY_BAZ" }; /// assert_enum_eq(some_func_returning_my_enum(), MY_BAR, my_enum_names); /// /// (If the reference value is out of bounds, both values are printed as /// an integer. If only test expression is out of bounds, it is printed /// as an integer and the reference as a string. Otherwise both are printed /// as a string.) #define assert_enum_eq(test_expr, ref_value, enum_strings) \ do { \ const tuktest_int v_test_ = (test_expr); \ const tuktest_int v_ref_ = (ref_value); \ if (v_test_ != v_ref_) { \ const int array_len_ = (int)(sizeof(enum_strings) \ / sizeof((enum_strings)[0])); \ if (v_ref_ < 0 || v_ref_ >= array_len_) \ assert_fail("assert_enum_eq: '%s == %" TUKTEST_PRId \ "' but expected " \ "'... == %" TUKTEST_PRId "'", \ #test_expr, v_test_, v_ref_); \ else if (v_test_ < 0 || v_test_ >= array_len_) \ assert_fail("assert_enum_eq: '%s == %" TUKTEST_PRId \ "' but expected '... == %s'", \ #test_expr, v_test_, \ (enum_strings)[v_ref_]); \ else \ assert_fail("assert_enum_eq: '%s == %s' " \ "but expected '... = %s'", \ #test_expr, (enum_strings)[v_test_], \ (enum_strings)[v_ref_]); \ } \ } while (0) /// Fails the test if the specified bit isn't set in the test expression. #define assert_bit_set(test_expr, bit) \ do { \ const tuktest_uint v_test_ = (test_expr); \ const unsigned v_bit_ = (bit); \ const tuktest_uint v_mask_ = (tuktest_uint)1 << v_bit_; \ if (!(v_test_ & v_mask_)) \ assert_fail("assert_bit_set: '%s == 0x%" TUKTEST_PRIX \ "' but bit %u (0x%" TUKTEST_PRIX ") " \ "is not set", \ #test_expr, v_test_, v_bit_, v_mask_); \ } while (0) /// Fails the test if the specified bit is set in the test expression. #define assert_bit_not_set(test_expr, bit) \ do { \ const tuktest_uint v_test_ = (test_expr); \ const unsigned v_bit_ = (bit); \ const tuktest_uint v_mask_ = (tuktest_uint)1 << v_bit_; \ if (v_test_ & v_mask_) \ assert_fail("assert_bit_not_set: '%s == 0x%" TUKTEST_PRIX \ "' but bit %u (0x%" TUKTEST_PRIX ") is set", \ #test_expr, v_test_, v_bit_, v_mask_); \ } while (0) /// Fails the test if unless all bits that are set in the bitmask are also /// set in the test expression. #define assert_bitmask_set(test_expr, mask) \ do { \ const tuktest_uint v_mask_ = (mask); \ const tuktest_uint v_test_ = (test_expr) & v_mask_; \ if (v_test_ != v_mask_) \ assert_fail("assert_bitmask_set: " \ "'((%s) & 0x%" TUKTEST_PRIX ") == " \ "0x%" TUKTEST_PRIX "' but expected " \ "'... == 0x%" TUKTEST_PRIX "'", \ #test_expr, v_mask_, v_test_, v_mask_); \ } while (0) /// Fails the test if any of the bits that are set in the bitmask are also /// set in the test expression. #define assert_bitmask_not_set(test_expr, mask) \ do { \ const tuktest_uint v_mask_ = (mask); \ const tuktest_uint v_test_ = (test_expr) & v_mask_; \ if (v_test_ != 0) \ assert_fail("assert_bitmask_not_set: "\ "'((%s) & 0x%" TUKTEST_PRIX ") == " \ "0x%" TUKTEST_PRIX "' but expected " \ "'... == 0'", \ #test_expr, v_mask_, v_test_); \ } while (0) // Internal helper to add common code for string assertions. #define tuktest_str_helper1(macro_name, test_expr, ref_value) \ const char *v_test_ = (test_expr); \ const char *v_ref_ = (ref_value); \ if (v_test_ == NULL) \ assert_fail(macro_name ": Test expression '%s' is NULL", \ #test_expr); \ if (v_ref_ == NULL) \ assert_fail(macro_name ": Reference value '%s' is NULL", \ #ref_value) // Internal helper to add common code for string assertions and to check // that the reference value isn't an empty string. #define tuktest_str_helper2(macro_name, test_expr, ref_value) \ tuktest_str_helper1(macro_name, test_expr, ref_value); \ if (v_ref_[0] == '\0') \ assert_fail(macro_name ": Reference value is an empty string") /// Fails the test if the test expression evaluates to string that doesn't /// equal to the expected string. #define assert_str_eq(test_expr, ref_value) \ do { \ tuktest_str_helper1("assert_str_eq", test_expr, ref_value); \ if (strcmp(v_ref_, v_test_) != 0) \ assert_fail("assert_str_eq: '%s' evaluated to '%s' " \ "but expected '%s'", \ #test_expr, v_test_, v_ref_); \ } while (0) /// Fails the test if the test expression evaluates to a string that doesn't /// contain the reference value as a substring. Also fails the test if /// the reference value is an empty string. #define assert_str_contains(test_expr, ref_value) \ do { \ tuktest_str_helper2("assert_str_contains", test_expr, ref_value); \ if (strstr(v_test_, v_ref_) == NULL) \ assert_fail("assert_str_contains: '%s' evaluated to '%s' " \ "which doesn't contain '%s'", \ #test_expr, v_test_, v_ref_); \ } while (0) /// Fails the test if the test expression evaluates to a string that /// contains the reference value as a substring. Also fails the test if /// the reference value is an empty string. #define assert_str_doesnt_contain(test_expr, ref_value) \ do { \ tuktest_str_helper2("assert_str_doesnt_contain", \ test_expr, ref_value); \ if (strstr(v_test_, v_ref_) != NULL) \ assert_fail("assert_str_doesnt_contain: " \ "'%s' evaluated to '%s' which contains '%s'", \ #test_expr, v_test_, v_ref_); \ } while (0) /// Fails the test if the first array_size elements of the test array /// don't equal to correct_array. /// /// NOTE: This avoids %zu for portability to very old systems that still /// can compile C99 code. #define assert_array_eq(test_array, correct_array, array_size) \ do { \ for (size_t i_ = 0; i_ < (array_size); ++i_) \ if ((test_array)[i_] != (correct_array)[i_]) \ assert_fail("assert_array_eq: " \ "%s[%" TUKTEST_PRIu "] != "\ "%s[%" TUKTEST_PRIu "] " \ "but should be equal", \ #test_array, (tuktest_uint)i_, \ #correct_array, (tuktest_uint)i_); \ } while (0) #endif