Commit Graph

1847 Commits

Author SHA1 Message Date
Lasse Collin a61dd82ada CMake: Try to improve compatibility with the FindLibLZMA module.
The naming conflict with FindLibLZMA module gets worse.
Not avoiding it in the first place was stupid.

Normally find_package(LibLZMA) will use the module and
find_package(liblzma 5.2.5 REQUIRED CONFIG) will use the config
file even with a case insensitive file system. However, if
CMAKE_FIND_PACKAGE_PREFER_CONFIG is TRUE and the file system
is case insensitive, find_package(LibLZMA) will find our liblzma
config file instead of using FindLibLZMA module.

One big problem with this is that FindLibLZMA uses
LibLZMA::LibLZMA and we use liblzma::liblzma as the target
name. With target names CMake happens to be case sensitive.
To workaround this, this commit adds

    add_library(LibLZMA::LibLZMA ALIAS liblzma::liblzma)

to the config file. Then both spellings work.

To make the behavior consistent between case sensitive and
insensitive file systems, the config and related files are
renamed from liblzmaConfig.cmake to liblzma-config.cmake style.
With this style CMake looks for lowercase version of the package
name so find_package(LiBLzmA 5.2.5 REQUIRED CONFIG) will work
to find our config file.

There are other differences between our config file and
FindLibLZMA so it's still possible that things break for
reasons other than the spelling of the target name. Hopefully
those situations aren't too common.

When the config file is available, it should always give as good or
better results as FindLibLZMA so this commit doesn't affect the
recommendation to use find_package(liblzma 5.2.5 REQUIRED CONFIG)
which explicitly avoids FindLibLZMA.

Thanks to Markus Rickert.
2021-01-30 18:36:04 +02:00
Lasse Collin 5b7bc1b8ae Update THANKS. 2021-01-29 21:19:43 +02:00
Lasse Collin 6c6f0db340 liblzma: Fix unitialized variable.
This was introduced two weeks ago in the commit
625f4c7c99.

Thanks to Nathan Moinvaziri.
2021-01-29 21:19:08 +02:00
Lasse Collin bb1d5c1fdd Tests: Add bad-1-lzma2-10.xz and also modify -9.xz. 2021-01-24 22:32:41 +02:00
Lasse Collin 6b8abc84a5 liblzma: Fix a wrong comment in stream_encoder_mt.c. 2021-01-24 19:22:35 +02:00
Lasse Collin 939fc5ed65 Tests: Add bad-1-lzma2-9.xz. 2021-01-24 18:51:51 +02:00
Lasse Collin fdd30032f8 Tests: Add bad-1-check-crc32-2.xz. 2021-01-24 17:04:51 +02:00
Lasse Collin db465419ae liblzma: In EROFS LZMA decoder, verify that comp_size matches at the end.
When the uncompressed size is known to be exact, after decompressing
the stream exactly comp_size bytes of input must have been consumed.
This is a minor improvement to error detection.
2021-01-17 19:20:50 +02:00
Lasse Collin 774cc0118b liblzma: Make EROFS LZMA decoder work when exact uncomp_size isn't known.
The caller must still not specify an uncompressed size bigger
than the actual uncompressed size.

As a downside, this now needs the exact compressed size.
2021-01-17 18:53:34 +02:00
Lasse Collin 421b0aa352 liblzma: Fix missing normalization in rc_encode_dummy().
Without this fix it could attempt to create too much output.
2021-01-14 20:57:11 +02:00
Lasse Collin 601ec0311e liblzma: Add EROFS LZMA encoder and decoder.
Right now this is just a planned extra-compact format for use
in the EROFS file system in Linux. At this point it's possible
that the format will either change or be abandoned and removed
completely.

The special thing about the encoder is that it uses the
output-size-limited encoding added in the previous commit.
EROFS uses fixed-sized blocks (e.g. 4 KiB) to hold compressed
data so the compressors must be able to create valid streams
that fill the given block size.
2021-01-14 20:10:59 +02:00
Lasse Collin 625f4c7c99 liblzma: Add rough support for output-size-limited encoding in LZMA1.
With this it is possible to encode LZMA1 data without EOPM so that
the encoder will encode as much input as it can without exceeding
the specified output size limit. The resulting LZMA1 stream will
be a normal LZMA1 stream without EOPM. The actual uncompressed size
will be available to the caller via the uncomp_size pointer.

One missing thing is that the LZMA layer doesn't inform the LZ layer
when the encoding is finished and thus the LZ may read more input
when it won't be used. However, this doesn't matter if encoding is
done with a single call (which is the planned use case for now).
For proper multi-call encoding this should be improved.

This commit only adds the functionality for internal use.
Nothing uses it yet.
2021-01-14 18:58:13 +02:00
Lasse Collin 9cdabbeea8 Scripts: Add zstd support to xzdiff. 2021-01-11 23:57:11 +02:00
Lasse Collin d9ec3add97 Update THANKS. 2021-01-11 23:41:30 +02:00
Lasse Collin 074259f4f3 xz: Make --keep accept symlinks, hardlinks, and setuid/setgid/sticky.
Previously this required using --force but that has other
effects too which might be undesirable. Changing the behavior
of --keep has a small risk of breaking existing scripts but
since this is a fairly special corner case I expect the
likehood of breakage to be low enough.

I think the new behavior is more logical. The only reason for
the old behavior was to be consistent with gzip and bzip2.

Thanks to Vincent Lefevre and Sebastian Andrzej Siewior.
2021-01-11 23:41:16 +02:00
Lasse Collin 73c555b307 Scripts: Fix exit status of xzgrep.
Omit the -q option from xz, gzip, and bzip2. With xz this shouldn't
matter. With gzip it's important because -q makes gzip replace SIGPIPE
with exit status 2. With bzip2 it's important because with -q bzip2
is completely silent if input is corrupt while other decompressors
still give an error message.

Avoiding exit status 2 from gzip is important because bzip2 uses
exit status 2 to indicate corrupt input. Before this commit xzgrep
didn't recognize corrupt .bz2 files because xzgrep was treating
exit status 2 as SIGPIPE for gzip compatibility.

zstd still needs -q because otherwise it is noisy in normal
operation.

The code to detect real SIGPIPE didn't check if the exit status
was due to a signal (>= 128) and so could ignore some other exit
status too.
2021-01-11 23:28:52 +02:00
Lasse Collin 194029ffaf Scripts: Fix exit status of xzdiff/xzcmp.
This is a minor fix since this affects only the situation when
the files differ and the exit status is something else than 0.
In such case there could be SIGPIPE from a decompression tool
and that would result in exit status of 2 from xzdiff/xzcmp
while the correct behavior would be to return 1 or whatever
else diff or cmp may have returned.

This commit omits the -q option from xz/gzip/bzip2/lzop arguments.
I'm not sure why the -q was used in the first place, perhaps it
hides warnings in some situation that I cannot see at the moment.
Hopefully the removal won't introduce a new bug.

With gzip the -q option was harmful because it made gzip return 2
instead of >= 128 with SIGPIPE. Ignoring exit status 2 (warning
from gzip) isn't practical because bzip2 uses exit status 2 to
indicate corrupt input file. It's better if SIGPIPE results in
exit status >= 128.

With bzip2 the removal of -q seems to be good because with -q
it prints nothing if input is corrupt. The other tools aren't
silent in this situation even with -q. On the other hand, if
zstd support is added, it will need -q since otherwise it's
noisy in normal situations.

Thanks to Étienne Mollier and Sebastian Andrzej Siewior.
2021-01-11 22:58:58 +02:00
Lasse Collin f7fa309e1f liblzma: Make lzma_outq usable for threaded decompression too.
Before this commit all output queue buffers were allocated as
a single big allocation. Now each buffer is allocated separately
when needed. Used buffers are cached to avoid reallocation
overhead but the cache will keep only one buffer size at a time.
This should make things work OK in the decompression where most
of the time the buffer sizes will be the same but with some less
common files the buffer sizes may vary.

While this should work fine, it's still a bit preliminary
and may even get reverted if it turns out to be useless for
decompression.
2021-01-09 22:18:23 +02:00
Lasse Collin a35a69d693 Update THANKS. 2020-12-23 17:15:49 +02:00
H.J. Lu 4fd79b90c5 liblzma: Enable Intel CET in x86 CRC assembly codes
When Intel CET is enabled, we need to include <cet.h> in assembly codes
to mark Intel CET support and add _CET_ENDBR to indirect jump targets.

Tested on Intel Tiger Lake under CET enabled Linux.
2020-12-23 17:13:33 +02:00
Lasse Collin bb3b8c6a23 Update THANKS. 2020-12-16 18:33:29 +02:00
Lasse Collin 21588ca34a Build: Don't build bundles on Apple OSes.
Thanks to Daniel Packard.
2020-12-16 18:30:14 +02:00
Lasse Collin d05b0c42dd Update THANKS. 2020-12-05 22:44:03 +02:00
Adam Borowski 1890351f34 Scripts: Add zstd support to xzgrep.
Thanks to Adam Borowski.
2020-12-05 22:39:03 +02:00
Lasse Collin 2f108abb3d CMake: Fix compatibility with CMake 3.13.
The syntax "if(DEFINED CACHE{FOO})" requires CMake 3.14.
In some other places the code treats the cache variables
like normal variables already (${FOO} or if(FOO) is used,
not ${CACHE{FOO}).

Thanks to ygrek for reporting the bug on IRC.
2020-11-17 21:09:39 +02:00
Lasse Collin 5af726a792 Update THANKS. 2020-11-01 22:56:43 +02:00
Lasse Collin 4575d9d365 xz: Avoid unneeded \f escapes on the man page.
I don't want to use \c in macro arguments but groff_man(7)
suggests that \f has better portability. \f would be needed
for the .TP strings for portability reasons anyway.

Thanks to Bjarni Ingi Gislason.
2020-11-01 22:34:25 +02:00
Lasse Collin 620b32f533 xz: Use non-breaking spaces when intentionally using more than one space.
This silences some style checker warnings. Seems that spaces
in the beginning of a line don't need this treatment.

Thanks to Bjarni Ingi Gislason.
2020-11-01 19:09:53 +02:00
Lasse Collin cb1f34988c xz: Protect the ellipsis (...) on the man page with \&.
This does it only when ... appears outside macro calls.

Thanks to Bjarni Ingi Gislason.
2020-11-01 18:53:25 +02:00
Lasse Collin 5d224da3da xz: Avoid the abbreviation "e.g." on the man page.
A few are simply omitted, most are converted to "for example"
and surrounded with commas. Sounds like that this is better
style, for example, man-pages(7) recommends avoiding such
abbreviations except in parenthesis.

Thanks to Bjarni Ingi Gislason.
2020-11-01 18:44:51 +02:00
Lasse Collin 90457dbe3e xz man page: Change \- (minus) to \(en (en-dash) for a numeric range.
Docs of ancient troff/nroff mention \(em (em-dash) but not \(en
and \- was used for both minus and en-dash. I don't know how
portable \(en is nowadays but it can be changed back if someone
complains. At least GNU groff and OpenBSD's mandoc support it.

Thanks to Bjarni Ingi Gislason for the patch.
2020-07-12 23:10:03 +03:00
Lasse Collin 352ba2d69a Windows: Fix building of resource files when config.h isn't used.
Now CMake + Visual Studio works for building liblzma.dll.

Thanks to Markus Rickert.
2020-07-12 20:46:24 +03:00
Lasse Collin a9e2a87f1d src/scripts/xzgrep.1: Filenames to xzgrep are optional.
xzgrep --help was correct already.
2020-04-06 19:34:48 +03:00
Bjarni Ingi Gislason a7ba275d9b src/script/xzgrep.1: Remove superfluous '.RB'
Output is from: test-groff -b -e -mandoc -T utf8 -rF0 -t -w w -z

  [ "test-groff" is a developmental version of "groff" ]

Input file is ./src/scripts/xzgrep.1

<src/scripts/xzgrep.1>:20 (macro RB): only 1 argument, but more are expected
<src/scripts/xzgrep.1>:23 (macro RB): only 1 argument, but more are expected
<src/scripts/xzgrep.1>:26 (macro RB): only 1 argument, but more are expected
<src/scripts/xzgrep.1>:29 (macro RB): only 1 argument, but more are expected
<src/scripts/xzgrep.1>:32 (macro RB): only 1 argument, but more are expected

 "abc..." does not mean the same as "abc ...".

  The output from nroff and troff is unchanged except for the space
between "file" and "...".

Signed-off-by: Bjarni Ingi Gislason <bjarniig@rhi.hi.is>
2020-04-06 19:29:15 +03:00
Bjarni Ingi Gislason 133d498db0 xzgrep.1: Delete superfluous '.PP'
Summary:

mandoc -T lint xzgrep.1 :
mandoc: xzgrep.1:79:2: WARNING: skipping paragraph macro: PP empty

  There is no change in the output of "nroff" and "troff".

Signed-off-by: Bjarni Ingi Gislason <bjarniig@rhi.hi.is>
2020-04-06 19:08:14 +03:00
Bjarni Ingi Gislason 057839ca98 src/xz/xz.1: Correct misused two-fonts macros
Output is from: test-groff -b -e -mandoc -T utf8 -rF0 -t -w w -z

  [ "test-groff" is a developmental version of "groff" ]

Input file is ./src/xz/xz.1

<src/xz/xz.1>:408 (macro BR): only 1 argument, but more are expected
<src/xz/xz.1>:1009 (macro BR): only 1 argument, but more are expected
<src/xz/xz.1>:1743 (macro BR): only 1 argument, but more are expected
<src/xz/xz.1>:1920 (macro BR): only 1 argument, but more are expected
<src/xz/xz.1>:2213 (macro BR): only 1 argument, but more are expected

  Output from nroff and troff is unchanged, except for a font change of a
full stop (.).

Signed-off-by: Bjarni Ingi Gislason <bjarniig@rhi.hi.is>
2020-04-06 19:08:04 +03:00
Lasse Collin b8e12f5ab4 Typo fixes from fossies.org.
https://fossies.org/linux/misc/xz-5.2.5.tar.xz/codespell.html
2020-03-23 18:07:50 +02:00
Lasse Collin 869b9d1b4e Update NEWS for 5.2.5. 2020-03-17 16:24:28 +02:00
Lasse Collin a048e3a92d README: Update outdated sections. 2020-03-16 20:01:37 +02:00
Lasse Collin 29aed815ad README: Mention that man pages can be translated. 2020-03-16 19:39:45 +02:00
Lasse Collin 7fa7653940 Update INSTALL.generic from Automake 1.16.1. 2020-03-16 16:43:29 +02:00
Lasse Collin 9bd317ef03 Update INSTALL for Windows and DOS and add preliminary info for z/OS. 2020-03-15 15:27:22 +02:00
Lasse Collin a3148c0446 Build: Update m4/ax_pthread.m4 from Autoconf Archive (again). 2020-03-15 15:26:20 +02:00
Lasse Collin 7812002dd3 xz: Never use thousand separators in DJGPP builds.
DJGPP 2.05 added support for thousands separators but it's
broken at least under WinXP with Finnish locale that uses
a non-breaking space as the thousands separator. Workaround
by disabling thousands separators for DJGPP builds.
2020-03-11 21:15:35 +02:00
Lasse Collin 7c8f688bf7 DOS: Update dos/Makefile for DJGPP 2.05.
It doesn't need -fgnu89-inline like 2.04beta did.
2020-03-11 19:38:08 +02:00
Lasse Collin 319ca928d7 DOS: Update instructions in dos/INSTALL.txt. 2020-03-11 19:36:07 +02:00
Lasse Collin cb6b227ce3 DOS: Update config.h.
The added defines assume GCC >= 4.8.
2020-03-11 17:58:51 +02:00
Lasse Collin 4572d53e16 liblzma: Fix a comment and RC_SYMBOLS_MAX.
The comment didn't match the value of RC_SYMBOLS_MAX and the value
itself was slightly larger than actually needed. The only harm
about this was that memory usage was a few bytes larger.
2020-03-02 13:54:33 +02:00
Lasse Collin 265daa873c Build: Make CMake build fail if tuklib_cpucores or tuklib_physmem fails. 2020-02-27 20:58:52 +02:00
Lasse Collin 7c8b904527 Build: Add support for --no-po4a option to autogen.sh.
Normally, if po4a isn't available, autogen.sh will return
with non-zero exit status. The option --no-po4a can be useful
when one knows that po4a isn't available but wants autogen.sh
to still return with zero exit status.
2020-02-27 20:24:27 +02:00