It has been the default for quite some time already and
the old serial harness isn't discouraged. The downside is
that with parallel tests one cannot print progress info or
other diagnostics to the terminal; all output from the tests
will be in the log files only. But now that the compression
tests are separated the parallel tests will speed things up.
test_compress.sh now takes one command line argument:
a filename to be tested. If it begins with "compress_generated_"
the file will be created with create_compress_files.
This will allow parallel execution of the slow tests.
If a command line argument is given, then only the test file
of that type is created. It's quite dumb in sense that unknown
names don't give an error but it's good enough here.
Also use EXIT_FAILURE instead of 1 as exit status for errors.
The SIZE_MAX / 3 was 1365 MiB. 1400 MiB gives little more room
and it looks like a round (artificial) number in --info-memory
once --info-memory is made to display it.
Also, using #if avoids useless code on 64-bit builds.
This is a soft limit in sense that it only affects the number of
threads. It never makes xz fail and it never makes xz change
settings that would affect the compressed output.
The idea is to make -T0 have more reasonable behavior when
the system has very many cores or when a memory-hungry
compression options are used. This also helps with 32-bit xz,
preventing it from running out of address space.
The downside of this commit is that now the number of threads
might become too low compared to what the user expected. I
hope this to be an acceptable compromise as the old behavior
has been a source of well-argued complaints for a long time.
The main problem withi the old behavior is that the compressed
output is different on single-core systems vs. multicore systems.
This commit fixes it by making -T0 one thread in multithreaded mode
on single-core systems.
The downside of this is that it uses more memory. However, if
--memlimit-compress is used, xz can (thanks to the previous commit)
drop to the single-threaded mode still.
In single-threaded mode, --memlimit-compress can make xz scale down
the LZMA2 dictionary size to meet the memory usage limit. This
obviously affects the compressed output. However, if xz was in
threaded mode, --memlimit-compress could make xz reduce the number
of threads but it wouldn't make xz switch from multithreaded mode
to single-threaded mode or scale down the LZMA2 dictionary size.
This seemed illogical and there was even a "FIXME?" about it.
Now --memlimit-compress can make xz switch to single-threaded
mode if one thread in multithreaded mode uses too much memory.
If memory usage is still too high, then the LZMA2 dictionary
size can be scaled down too.
The option --no-adjust was also changed so that it no longer
prevents xz from scaling down the number of threads as that
doesn't affect compressed output (only performance). After
this commit --no-adjust only prevents adjustments that affect
compressed output, that is, with --no-adjust xz won't switch
from multithreaded mode to single-threaded mode and won't
scale down the LZMA2 dictionary size.
The man page wasn't updated yet.
--memlimit-mt-decompress allows specifying the limit for
multithreaded decompression. This matches memlimit_threading in
liblzma. This limit can only affect the number of threads being
used; it will never prevent xz from decompressing a file. The
old --memlimit-decompress option is still used at the same time.
If the value of --memlimit-decompress (the default value or
one specified by the user) is less than the value of
--memlimit-mt-decompress , then --memlimit-mt-decompress is
reduced to match --memlimit-decompress.
Man page wasn't updated yet.
In most cases if the input file is corrupt the application won't
care about the uncompressed content at all. With this new flag
the threaded decoder will return an error as soon as any thread
has detected an error; it won't wait to copy out the data before
the location of the error.
I don't plan to use this in xz to keep the behavior consistent
between single-threaded and multi-threaded modes.
This makes it possible to call lzma_code() in a loop that only
reads new input when lzma_code() didn't fill the output buffer
completely. That isn't the calling style suggested by the
liblzma example program 02_decompress.c so perhaps the usefulness
of this feature is limited.
Also, it is possible to write such a loop so that it works
with the single-threaded decoder but not with the threaded
decoder even after this commit, or so that it works only if
lzma_mt.timeout = 0.
The zlib tutorial <https://zlib.net/zlib_how.html> is a well-known
example of a loop where more input is read only when output isn't
full. Porting this as is to liblzma would work with the
single-threaded decoder (if LZMA_CONCATENATED isn't used) but it
wouldn't work with threaded decoder even after this commit because
the loop assumes that no more output is possible when it cannot
read more input ("if (strm.avail_in == 0) break;"). This cannot
be fixed at liblzma side; the loop has to be modified at least
a little.
I'm adding this in any case because the actual code is simple
and short and should have no harmful side-effects in other
situations.
Malicious filenames can make xzgrep to write to arbitrary files
or (with a GNU sed extension) lead to arbitrary code execution.
xzgrep from XZ Utils versions up to and including 5.2.5 are
affected. 5.3.1alpha and 5.3.2alpha are affected as well.
This patch works for all of them.
This bug was inherited from gzip's zgrep. gzip 1.12 includes
a fix for zgrep.
The issue with the old sed script is that with multiple newlines,
the N-command will read the second line of input, then the
s-commands will be skipped because it's not the end of the
file yet, then a new sed cycle starts and the pattern space
is printed and emptied. So only the last line or two get escaped.
One way to fix this would be to read all lines into the pattern
space first. However, the included fix is even simpler: All lines
except the last line get a backslash appended at the end. To ensure
that shell command substitution doesn't eat a possible trailing
newline, a colon is appended to the filename before escaping.
The colon is later used to separate the filename from the grep
output so it is fine to add it here instead of a few lines later.
The old code also wasn't POSIX compliant as it used \n in the
replacement section of the s-command. Using \<newline> is the
POSIX compatible method.
LC_ALL=C was added to the two critical sed commands. POSIX sed
manual recommends it when using sed to manipulate pathnames
because in other locales invalid multibyte sequences might
cause issues with some sed implementations. In case of GNU sed,
these particular sed scripts wouldn't have such problems but some
other scripts could have, see:
info '(sed)Locale Considerations'
This vulnerability was discovered by:
cleemy desu wayo working with Trend Micro Zero Day Initiative
Thanks to Jim Meyering and Paul Eggert discussing the different
ways to fix this and for coordinating the patch release schedule
with gzip.
If a worker thread has consumed all input so far and it's
waiting on thr->cond and then the main thread enables
partial update for that thread, the code used to deadlock.
This commit allows one dummy decoding pass to occur in this
situation which then also does the partial update.
As part of the fix, this moves thr->progress_* updates to
avoid the second thr->mutex locking.
Thanks to Jia Tan for finding, debugging, and reporting the bug.
LZMA_TIMED_OUT is not an error and thus stopping threads on
LZMA_TIMED_OUT breaks the decoder badly.
Thanks to Jia Tan for finding the bug and for the patch.
If threading support is enabled at build time, this will
use lzma_stream_decoder_mt() even for single-threaded mode.
With memlimit_threading=0 the behavior should be identical.
This needs some work like adding --memlimit-threading=LIMIT.
The original patch from Sebastian Andrzej Siewior included
a method to get currently available RAM on Linux. It might
be one way to go but as it is Linux-only, the available-RAM
approach needs work for portability or using a fallback method
on other OSes.
The man page wasn't updated yet.
I realize that this is about a decade late.
Big thanks to Sebastian Andrzej Siewior for the original patch.
I made a bunch of smaller changes but after a while quite a few
things got rewritten. So any bugs in the commit were created by me.
Add lzma_outq_clear_cache2() which may leave one buffer allocated
in the cache.
Add lzma_outq_outbuf_memusage() to get the memory needed for
a single lzma_outbuf. This is now used internally in outqueue.c too.
Track both the total amount of memory allocated and the amount of
memory that is in active use (not in cache).
In lzma_outbuf, allow storing the current input position that
matches the current output position. This way the main thread
can notice when no more output is possible without first providing
more input.
Allow specifying return code for lzma_outq_read() in a finished
lzma_outbuf.
If lzma_index_append() failed (most likely memory allocation failure)
it could have gone unnoticed and the resulting .xz file would have
an incorrect Index. Decompressing such a file would produce the
correct uncompressed data but then an error would occur when
verifying the Index field.
Now it limits the input and output buffer sizes that are
passed to a raw decoder. This way there's no need to check
if the sizes can grow too big or overflow when updating
Compressed Size and Uncompressed Size counts. This also means
that a corrupt file cannot cause the raw decoder to process
useless extra input or output that would exceed the size info
in Block Header (and thus cause LZMA_DATA_ERROR anyway).
More importantly, now the size information is verified more
carefully in case raw decoder returns LZMA_OK. This doesn't
really matter with the current single-threaded .xz decoder
as the errors would be detected slightly later anyway. But
this helps avoiding corner cases in the upcoming threaded
decompressor, and it might help other Block decoder uses
outside liblzma too.
The test files bad-1-lzma2-{9,10,11}.xz test these conditions.
With the single-threaded .xz decoder the only difference is
that LZMA_DATA_ERROR is detected in a difference place now.
This matches xz-utils 5.2.5-2 in Debian.
The translation was done by "bubu", proofread by the debian-l10n-french
mailing list contributors, and submitted to me on the xz-devel mailing
list by Jean-Pierre Giraud. Thanks to everyone!
Previously lzma_lzma_props_encode() and lzma_lzma2_props_encode()
assumed that the options pointers must be non-NULL because the
with these filters the API says it must never be NULL. It is
good to do these checks anyway.
This broke 32-bit builds due to a pointer type mismatch.
This bug was introduced with the output-size-limited encoding
in 625f4c7c99.
Thanks to huangqinjin for the bug report.
OpenBSD does not allow to change the group of a file if the user
does not belong to this group. In contrast to Linux, OpenBSD also
fails if the new group is the same as the old one. Do not call
fchown(2) in this case, it would change nothing anyway.
This fixes an issue with Perl Alien::Build module.
https://github.com/PerlAlien/Alien-Build/issues/62
Lasse Collin
Ed Maste
jiat75
huangqinjin
Ville Skyttä
Alexander Bluhm