Commit Graph

1267 Commits

Author SHA1 Message Date
Lasse Collin af0fb386ef xz: Comment out annoying sandboxing messages. 2020-02-05 20:33:50 +02:00
Lasse Collin 3539705108 xz: Limit --memlimit-compress to at most 4020 MiB for 32-bit xz.
See the code comment for reasoning. It's far from perfect but
hopefully good enough for certain cases while hopefully doing
nothing bad in other situations.

At presets -5 ... -9, 4020 MiB vs. 4096 MiB makes no difference
on how xz scales down the number of threads.

The limit has to be a few MiB below 4096 MiB because otherwise
things like "xz --lzma2=dict=500MiB" won't scale down the dict
size enough and xz cannot allocate enough memory. With
"ulimit -v $((4096 * 1024))" on x86-64, the limit in xz had
to be no more than 4085 MiB. Some safety margin is good though.

This is hack but it should be useful when running 32-bit xz on
a 64-bit kernel that gives full 4 GiB address space to xz.
Hopefully this is enough to solve this:

https://bugzilla.redhat.com/show_bug.cgi?id=1196786

FreeBSD has a patch that limits the result in tuklib_physmem()
to SIZE_MAX on 32-bit systems. While I think it's not the way
to do it, the results on --memlimit-compress have been good. This
commit should achieve practically identical results for compression
while leaving decompression and tuklib_physmem() and thus
lzma_physmem() unaffected.
2020-02-01 19:56:18 +02:00
Lasse Collin ba76d67585 xz: Set the --flush-timeout deadline when the first input byte arrives.
xz --flush-timeout=2000, old version:

  1. xz is started. The next flush will happen after two seconds.
  2. No input for one second.
  3. A burst of a few kilobytes of input.
  4. No input for one second.
  5. Two seconds have passed and flushing starts.

The first second counted towards the flush-timeout even though
there was no pending data. This can cause flushing to occur more
often than needed.

xz --flush-timeout=2000, after this commit:

  1. xz is started.
  2. No input for one second.
  3. A burst of a few kilobytes of input. The next flush will
     happen after two seconds counted from the time when the
     first bytes of the burst were read.
  4. No input for one second.
  5. No input for another second.
  6. Two seconds have passed and flushing starts.
2020-01-26 20:53:25 +02:00
Lasse Collin fd47fd62bb xz: Move flush_needed from mytime.h to file_pair struct in file_io.h. 2020-01-26 20:25:52 +02:00
Lasse Collin 8150356810 xz: coder.c: Make writing output a separate function.
The same code sequence repeats so it's nicer as a separate function.
Note that in one case there was no test for opt_mode != MODE_TEST,
but that was only because that condition would always be true, so
this commit doesn't change the behavior there.
2020-01-26 14:49:22 +02:00
Lasse Collin 5a49e081a0 xz: Fix semi-busy-waiting in xz --flush-timeout.
When input blocked, xz --flush-timeout=1 would wake up every
millisecond and initiate flushing which would have nothing to
flush and thus would just waste CPU time. The fix disables the
timeout when no input has been seen since the previous flush.
2020-01-26 14:13:42 +02:00
Lasse Collin dcca70fe9f xz: Refactor io_read() a bit. 2020-01-26 13:47:31 +02:00
Lasse Collin 4ae9ab70cd xz: Update a comment in file_io.h. 2020-01-26 13:37:08 +02:00
Lasse Collin 3333ba4a67 xz: Move the setting of flush_needed in file_io.c to a nicer location. 2020-01-26 13:27:51 +02:00
Lasse Collin 7136f1735c Rename unaligned_read32ne to read32ne, and similarly for the others. 2019-12-31 00:47:49 +02:00
Lasse Collin 5e78fcbf2e Rename read32ne to aligned_read32ne, and similarly for the others.
Using the aligned methods requires more care to ensure that
the address really is aligned, so it's nicer if the aligned
methods are prefixed. The next commit will remove the unaligned_
prefix from the unaligned methods which in liblzma are used in
more places than the aligned ones.
2019-12-31 00:29:48 +02:00
Lasse Collin 77bc5bc6dd Revise tuklib_integer.h and .m4.
Add a configure option --enable-unsafe-type-punning to get the
old non-conforming memory access methods. It can be useful with
old compilers or in some other less typical situations but
shouldn't normally be used.

Omit the packed struct trick for unaligned access. While it's
best in some cases, this is simpler. If the memcpy trick doesn't
work, one can request unsafe type punning from configure.

Because CRC32/CRC64 code needs fast aligned reads, if no very
safe way to do it is found, type punning is used as a fallback.
This sucks but since it currently works in practice, it seems to
be the least bad option. It's never needed with GCC >= 4.7 or
Clang >= 3.6 since these support __builtin_assume_aligned and
thus fast aligned access can be done with the memcpy trick.

Other things:
  - Support GCC/Clang __builtin_bswapXX
  - Cleaner bswap fallback macros
  - Minor cleanups
2019-12-31 00:18:24 +02:00
Lasse Collin 43ce4ea7c7 Scripts: Put /usr/xpg4/bin to the beginning of PATH on Solaris.
This adds a configure option --enable-path-for-scripts=PREFIX
which defaults to empty except on Solaris it is /usr/xpg4/bin
to make POSIX grep and others available. The Solaris case had
been documented in INSTALL with a manual fix but it's better
to do this automatically since it is needed on most Solaris
systems anyway.

Thanks to Daniel Richard G.
2019-09-24 23:02:40 +03:00
Lasse Collin 6a89e656eb Fix comment typos in tuklib_mbstr* files. 2019-07-12 18:57:43 +03:00
Lasse Collin ac0b421265 Add missing include to tuklib_mbstr_width.c.
It didn't matter in XZ Utils because sysdefs.h
includes string.h anyway.
2019-07-12 18:30:46 +03:00
Lasse Collin 72a443281f Update tuklib base headers to include stdbool.h. 2019-07-12 18:10:57 +03:00
Lasse Collin de1f47b2b4 xz: Automatically align the strings in --info-memory.
This makes it easier to translate the strings.

Also, the string for amount of RAM was shortened.
2019-06-28 00:54:31 +03:00
Lasse Collin 8ce679125d liblzma: Fix a buggy comment. 2019-06-25 23:15:21 +03:00
Lasse Collin d499e467d9 liblzma: Add a comment. 2019-06-24 23:52:17 +03:00
Lasse Collin a12b13c5f0 liblzma: Silence clang -Wmissing-variable-declarations. 2019-06-24 23:45:21 +03:00
Lasse Collin 1b4675cebf Add LZMA_RET_INTERNAL1..8 to lzma_ret and use one for LZMA_TIMED_OUT.
LZMA_TIMED_OUT is *internally* used as a value for lzma_ret
enumeration. Previously it was #defined to 32 and cast to lzma_ret.
That way it wasn't visible in the public API, but this was hackish.

Now the public API has eight LZMA_RET_INTERNALx members and
LZMA_TIMED_OUT is #defined to LZMA_RET_INTERNAL1. This way
the code is cleaner overall although the public API has a few
extra mysterious enum members.
2019-06-24 23:25:41 +03:00
Lasse Collin 159c43875e xz: Silence a warning from clang -Wsign-conversion in main.c. 2019-06-24 22:57:43 +03:00
Lasse Collin 466cfcd3e5 xz: Make "headings" static in list.c.
Caught by clang -Wmissing-variable-declarations.
2019-06-24 22:52:20 +03:00
Lasse Collin 608517b9b7 liblzma: Remove incorrect uses of lzma_attribute((__unused__)).
Caught by clang -Wused-but-marked-unused.
2019-06-24 22:50:36 +03:00
Lasse Collin 2402f7873d xz: Fix an integer overflow with 32-bit off_t.
Or any off_t which isn't very big (like signed 64 bit integer
that most system have). A small off_t could overflow if the
file being decompressed had long enough run of zero bytes,
which would result in corrupt output.
2019-06-24 20:45:49 +03:00
Lasse Collin 4fd3a8dd0b xz: Cleanup io_seek_src() a bit.
lseek() returns -1 on error and checking for -1 is nicer.
2019-06-24 01:24:17 +03:00
Lasse Collin 1d4a904d8f xz: Change io_seek_src and io_pread arguments from off_t to uint64_t.
This helps fixing warnings from -Wsign-conversion and makes the
code look better too.
2019-06-24 00:40:45 +03:00
Lasse Collin 50120deb01 xz: list.c: Fix some warnings from -Wsign-conversion. 2019-06-24 00:12:38 +03:00
Lasse Collin d0a78751eb tuklib_mbstr_width: Fix a warning from -Wsign-conversion. 2019-06-23 23:22:45 +03:00
Lasse Collin 7883d73530 xz: Fix some of the warnings from -Wsign-conversion. 2019-06-23 23:19:34 +03:00
Lasse Collin c2b994fe3d tuklib_cpucores: Silence warnings from -Wsign-conversion. 2019-06-23 22:27:45 +03:00
Lasse Collin 07c4fa9e1a xzdec: Fix warnings from -Wsign-conversion. 2019-06-23 21:40:47 +03:00
Lasse Collin dfac2c9a1d liblzma: Fix warnings from -Wsign-conversion.
Also, more parentheses were added to the literal_subcoder
macro in lzma_comon.h (better style but no functional change
in the current usage).
2019-06-23 21:38:56 +03:00
Lasse Collin 41838dcc26 tuklib_integer: Silence warnings from -Wsign-conversion. 2019-06-23 19:33:55 +03:00
Lasse Collin 3ce05d235f tuklib_integer: Fix usage of conv macros.
Use a temporary variable instead of e.g.
conv32le(unaligned_read32ne(buf)) because the macro can
evaluate its argument multiple times.
2019-06-20 19:40:30 +03:00
Lasse Collin 039a168e8c liblzma: Fix comments.
Thanks to Bruce Stark.
2019-06-03 20:41:54 +03:00
Lasse Collin c460f6defe liblzma: Fix one more unaligned read to use unaligned_read16ne(). 2019-06-02 00:50:59 +03:00
Lasse Collin 386394fc9f liblzma: memcmplen: Use ctz32() from tuklib_integer.h.
The same compiler-specific #ifdefs are already in tuklib_integer.h
2019-06-01 21:36:13 +03:00
Lasse Collin 264ab971ce tuklib_integer: Cleanup MSVC-specific code. 2019-06-01 21:30:03 +03:00
Lasse Collin 33773c6f2a liblzma: Use unaligned_readXXne functions instead of type punning.
Now gcc -fsanitize=undefined should be clean.

Thanks to Jeffrey Walton.
2019-06-01 19:01:21 +03:00
Lasse Collin 3bc112c2d3 tuklib_integer: Improve unaligned memory access.
Now memcpy() or GNU C packed structs for unaligned access instead
of type punning. See the comment in this commit for details.

Avoiding type punning with unaligned access is needed to
silence gcc -fsanitize=undefined.

New functions: unaliged_readXXne and unaligned_writeXXne where
XX is 16, 32, or 64.
2019-06-01 18:41:16 +03:00
Lasse Collin 2a22de439e liblzma: Avoid memcpy(NULL, foo, 0) because it is undefined behavior.
I should have always known this but I didn't. Here is an example
as a reminder to myself:

    int mycopy(void *dest, void *src, size_t n)
    {
        memcpy(dest, src, n);
        return dest == NULL;
    }

In the example, a compiler may assume that dest != NULL because
passing NULL to memcpy() would be undefined behavior. Testing
with GCC 8.2.1, mycopy(NULL, NULL, 0) returns 1 with -O0 and -O1.
With -O2 the return value is 0 because the compiler infers that
dest cannot be NULL because it was already used with memcpy()
and thus the test for NULL gets optimized out.

In liblzma, if a null-pointer was passed to memcpy(), there were
no checks for NULL *after* the memcpy() call, so I cautiously
suspect that it shouldn't have caused bad behavior in practice,
but it's hard to be sure, and the problematic cases had to be
fixed anyway.

Thanks to Jeffrey Walton.
2019-05-13 20:05:17 +03:00
Lasse Collin 4adb8288ab xz: Update xz man page date. 2019-05-11 20:54:12 +03:00
Antoine Cœur 2fb0ddaa55 spelling 2019-05-11 20:52:37 +03:00
Lasse Collin 4ed3396061 xz: In xz -lvv look at the widths of the check names too.
Now the widths of the check names is used to adjust the width
of the Check column. This way there no longer is a need to restrict
the widths of the check names to be at most ten terminal-columns.
2019-05-01 18:43:10 +03:00
Lasse Collin 2f4281a100 xz: Fix xz -lvv column alignment to look at the translated strings. 2019-05-01 18:33:25 +03:00
Lasse Collin a750c35a7d xz: Automatically align column headings in xz -lvv. 2019-03-04 21:20:39 +02:00
Lasse Collin 6cb42e8aa1 xz: Automatically align strings ending in a colon in --list output.
This should avoid alignment errors in translations with these
strings.
2019-03-04 21:16:59 +02:00
Lasse Collin b55d79461d xz: Fix a crash in progress indicator when in passthru mode.
"xz -dcfv not_an_xz_file" crashed (all four options are
required to trigger it). It caused xz to call
lzma_get_progress(&strm, ...) when no coder was initialized
in strm. In this situation strm.internal is NULL which leads
to a crash in lzma_get_progress().

The bug was introduced when xz started using lzma_get_progress()
to get progress info for multi-threaded compression, so the
bug is present in versions 5.1.3alpha and higher.

Thanks to Filip Palian <Filip.Palian@pjwstk.edu.pl> for
the bug report.
2018-12-20 20:39:20 +02:00
Lasse Collin 4ae5526de0 xz: Update man page timestamp. 2018-11-22 17:20:31 +02:00
Pavel Raiskup 6a36d0d5f4 'have have' typos 2018-11-22 17:19:09 +02:00
Lasse Collin a18ae42a79 liblzma: Don't verify header CRC32s if building for fuzz testing.
FUZZING_BUILD_MODE_UNSAFE_FOR_PRODUCTION is #defined when liblzma
is being built for fuzz testing.

Most fuzzed inputs would normally get rejected because of incorrect
CRC32 and the actual header decoding code wouldn't get fuzzed.
Disabling CRC32 checks avoids this problem. The fuzzer program
must still use LZMA_IGNORE_CHECK flag to disable verification of
integrity checks of uncompressed data.
2018-10-26 22:49:10 +03:00
Lasse Collin f76f7516d6 xzless: Rename unused variables to silence static analysers.
In this particular case I don't see this affecting readability
of the code.

Thanks to Pavel Raiskup.
2018-07-27 18:10:44 +03:00
Lasse Collin 3cbcaeb07e liblzma: Remove an always-true condition from lzma_index_cat().
This should help static analysis tools to see that newg
isn't leaked.

Thanks to Pavel Raiskup.
2018-07-27 16:02:58 +03:00
Lasse Collin 76762ae609 liblzma: Improve lzma_properties_decode() API documentation. 2018-05-19 21:23:25 +03:00
Lasse Collin 2267f5b0d2 Bump the version number to 5.3.1alpha. 2018-04-29 18:58:19 +03:00
Ben Boeckel bc19799169 nothrow: use noexcept for C++11 and newer
In C++11, the `throw()` specifier is deprecated and `noexcept` is
preffered instead.
2018-02-06 18:41:45 +02:00
Lasse Collin fb6d4f83cb liblzma: Remove incorrect #ifdef from range_common.h.
In most cases it was harmless but it could affect some
custom build systems.

Thanks to Pippijn van Steenhoven.
2018-02-06 18:02:48 +02:00
Lasse Collin 713bbc1a80 tuklib_integer: New Intel C compiler needs immintrin.h.
Thanks to Melanie Blower (Intel) for the patch.
2018-01-10 21:54:27 +02:00
Lasse Collin 94e3f986aa Fix or hide warnings from GCC 7's -Wimplicit-fallthrough. 2017-08-14 20:08:33 +03:00
Lasse Collin a015cd1f90 xz: Fix "xz --list --robot missing_or_bad_file.xz".
It ended up printing an uninitialized char-array when trying to
print the check names (column 7) on the "totals" line.

This also changes the column 12 (minimum xz version) to
50000002 (xz 5.0.0) instead of 0 when there are no valid
input files.

Thanks to kidmin for the bug report.
2017-05-23 18:34:43 +03:00
Lasse Collin 8269782283 xz: Use lzma_file_info_decoder() for --list. 2017-04-24 19:48:23 +03:00
Lasse Collin e353d0b1cc liblzma: Add lzma_file_info_decoder(). 2017-04-24 19:48:04 +03:00
Lasse Collin 8c9842c265 liblzma: Rename LZMA_SEEK to LZMA_SEEK_NEEDED and seek_in to seek_pos. 2017-04-21 15:05:16 +03:00
Lasse Collin 662b27c417 Update the home page URLs to HTTPS. 2017-04-19 22:17:35 +03:00
Lasse Collin c28f0b3d00 xz: Add io_seek_src(). 2017-04-05 18:47:22 +03:00
Lasse Collin bba477257d xz: Use POSIX_FADV_RANDOM for in "xz --list" mode.
xz --list is random access so POSIX_FADV_SEQUENTIAL was clearly
wrong.
2017-03-30 22:01:54 +03:00
Lasse Collin 310d19816d liblzma: Make lzma_index_decoder_init() visible to other liblzma funcs.
This is to allow other functions to use it without going
via the public API (lzma_index_decoder()).
2017-03-30 20:03:05 +03:00
Lasse Collin a27920002d liblzma: Add generic support for input seeking (LZMA_SEEK).
Also mention LZMA_SEEK in xz/message.c to silence a warning.
2017-03-30 20:00:09 +03:00
Lasse Collin a0b1dda409 liblzma: Fix lzma_memlimit_set(strm, 0).
The 0 got treated specially in a buggy way and as a result
the function did nothing. The API doc said that 0 was supposed
to return LZMA_PROG_ERROR but it didn't.

Now 0 is treated as if 1 had been specified. This is done because
0 is already used to indicate an error from lzma_memlimit_get()
and lzma_memusage().

In addition, lzma_memlimit_set() no longer checks that the new
limit is at least LZMA_MEMUSAGE_BASE. It's counter-productive
for the Index decoder and was actually needed only by the
auto decoder. Auto decoder has now been modified to check for
LZMA_MEMUSAGE_BASE.
2017-03-30 19:51:14 +03:00
Lasse Collin 84462afaad liblzma: Similar memlimit fix for stream_, alone_, and auto_decoder. 2017-03-30 19:16:55 +03:00
Lasse Collin cbc7401793 liblzma: Fix handling of memlimit == 0 in lzma_index_decoder().
It returned LZMA_PROG_ERROR, which was done to avoid zero as
the limit (because it's a special value elsewhere), but using
LZMA_PROG_ERROR is simply inconvenient and can cause bugs.

The fix/workaround is to treat 0 as if it were 1 byte. It's
effectively the same thing. The only weird consequence is
that then lzma_memlimit_get() will return 1 even when 0 was
specified as the limit.

This fixes a very rare corner case in xz --list where a specific
memory usage limit and a multi-stream file could print the
error message "Internal error (bug)" instead of saying that
the memory usage limit is too low.
2017-03-30 19:10:55 +03:00
Lasse Collin d4a0462abe liblzma: Avoid multiple definitions of lzma_coder structures.
Only one definition was visible in a translation unit.
It avoided a few casts and temp variables but seems that
this hack doesn't work with link-time optimizations in compilers
as it's not C99/C11 compliant.

Fixes:
http://www.mail-archive.com/xz-devel@tukaani.org/msg00279.html
2016-11-21 20:24:50 +02:00
Lasse Collin df8f446e3a tuklib_cpucores: Add support for sched_getaffinity().
It's available in glibc (GNU/Linux, GNU/kFreeBSD). It's better
than sysconf(_SC_NPROCESSORS_ONLN) because sched_getaffinity()
gives the number of cores available to the process instead of
the total number of cores online.

As a side effect, this commit fixes a bug on GNU/kFreeBSD where
configure would detect the FreeBSD-specific cpuset_getaffinity()
but it wouldn't actually work because on GNU/kFreeBSD it requires
using -lfreebsd-glue when linking. Now the glibc-specific function
will be used instead.

Thanks to Sebastian Andrzej Siewior for the original patch
and testing.
2016-10-24 18:51:36 +03:00
Lasse Collin 446e4318fa xz: Fix copying of timestamps on Windows.
xz used to call utime() on Windows, but its result gets lost
on close(). Using _futime() seems to work.

Thanks to Martok for reporting the bug:
http://www.mail-archive.com/xz-devel@tukaani.org/msg00261.html
2016-06-30 20:27:36 +03:00
Lasse Collin 1b0ac0c53c xz: Silence warnings from -Wlogical-op.
Thanks to Evan Nemerson.
2016-06-16 22:46:02 +03:00
Lasse Collin c83b7a0334 Build: Fix = to += for xz_SOURCES in src/xz/Makefile.am.
Thanks to Christian Kujau.
2016-04-10 20:55:49 +03:00
Lasse Collin ac398c3baf liblzma: Disable external SHA-256 by default.
This is the sane thing to do. The conflict with OpenSSL
on some OSes and especially that the OS-provided versions
can be significantly slower makes it clear that it was
a mistake to have the external SHA-256 support enabled by
default.

Those who want it can now pass --enable-external-sha256 to
configure. INSTALL was updated with notes about OSes where
this can be a bad idea.

The SHA-256 detection code in configure.ac had some bugs that
could lead to a build failure in some situations. These were
fixed, although it doesn't matter that much now that the
external SHA-256 is disabled by default.

MINIX >= 3.2.0 uses NetBSD's libc and thus has SHA256_Init
in libc instead of libutil. Support for the libutil version
was removed.
2016-03-13 20:21:49 +02:00
Lasse Collin faf302137e tuklib_physmem: Hopefully silence a warning on Windows. 2015-11-08 20:16:10 +02:00
Lasse Collin 14115f84a3 liblzma: Make Valgrind happier with optimized (gcc -O2) liblzma.
When optimizing, GCC can reorder code so that an uninitialized
value gets used in a comparison, which makes Valgrind unhappy.
It doesn't happen when compiled with -O0, which I tend to use
when running Valgrind.

Thanks to Rich Prohaska. I remember this being mentioned long
ago by someone else but nothing was done back then.
2015-11-04 23:14:00 +02:00
Lasse Collin f4c95ba94b liblzma: Rename lzma_presets.c back to lzma_encoder_presets.c.
It would be too annoying to update other build systems
just because of this.
2015-11-03 20:55:45 +02:00
Lasse Collin cb3111e3ed xz: Make xz buildable even when encoders or decoders are disabled.
The patch is quite long but it's mostly about adding new #ifdefs
to omit code when encoders or decoders have been disabled.

This adds two new #defines to config.h: HAVE_ENCODERS and
HAVE_DECODERS.
2015-11-03 20:29:33 +02:00
Lasse Collin 4cc584985c Build: Build LZMA1/2 presets also when only decoder is wanted.
People shouldn't rely on the presets when decoding raw streams,
but xz uses the presets as the starting point for raw decoder
options anyway.

lzma_encocder_presets.c was renamed to lzma_presets.c to
make it clear it's not used solely by the encoder code.
2015-11-03 18:06:40 +02:00
Lasse Collin b0bc3e0385 Build: Don't omit lzma_cputhreads() unless using --disable-threads.
Previously it was omitted if encoders were disabled
with --disable-encoders. It didn't make sense and
it also broke the build.
2015-11-03 17:41:54 +02:00
Lasse Collin c6bf438ab3 liblzma: Fix a build failure related to external SHA-256 support.
If an appropriate header and structure were found by configure,
but a library with a usable SHA-256 functions wasn't, the build
failed.
2015-11-02 18:16:51 +02:00
Lasse Collin e18adc56f2 xz: Always close the file before trying to delete it.
unlink() can return EBUSY in errno for open files on some
operating systems and file systems.
2015-11-02 15:19:10 +02:00
Lasse Collin 21515d79d7 liblzma: Fix lzma_index_dup() for empty Streams.
Stream Flags and Stream Padding weren't copied from
empty Streams.
2015-10-12 20:45:15 +03:00
Lasse Collin 09f395b6b3 liblzma: Add a note to index.c for those using static analyzers. 2015-10-12 20:31:44 +03:00
Lasse Collin 3bf857edfe liblzma: Fix a memory leak in error path of lzma_index_dup().
lzma_index_dup() calls index_dup_stream() which, in case of
an error, calls index_stream_end() to free memory allocated
by index_stream_init(). However, it illogically didn't
actually free the memory. To make it logical, the tree
handling code was modified a bit in addition to changing
index_stream_end().

Thanks to Evan Nemerson for the bug report.
2015-10-12 20:29:09 +03:00
Lasse Collin fbbb295a91 liblzma: A MSVC-specific hack isn't needed with MSVC 2013 and newer. 2015-07-12 20:48:19 +03:00
Lasse Collin 49c26920d6 xz: Document that threaded decompression hasn't been implemented yet. 2015-05-11 21:26:16 +03:00
Lasse Collin 6bd0349c58 Revert "xz: Use pipe2() if available."
This reverts commit 7a11c4a8e5.
It is a problem when libc has pipe2() but the kernel is too
old to have pipe2() and thus pipe2() fails. In xz it's pointless
to have a fallback for non-functioning pipe2(); it's better to
avoid pipe2() completely.

Thanks to Michael Fox for the bug report.
2015-04-20 20:17:48 +03:00
Lasse Collin fc0df0f8db xz: Fix the Capsicum rights on user_abort_pipe. 2015-04-01 14:45:25 +03:00
Lasse Collin 1238381143 xz: Add support for sandboxing with Capsicum.
The sandboxing is used conditionally as described in main.c.
This isn't optimal but it was much easier to implement than
a full sandboxing solution and it still covers the most common
use cases where xz is writing to standard output. This should
have practically no effect on performance even with small files
as fork() isn't needed.

C and locale libraries can open files as needed. This has been
fine in the past, but it's a problem with things like Capsicum.
io_sandbox_enter() tries to ensure that various locale-related
files have been loaded before cap_enter() is called, but it's
possible that there are other similar problems which haven't
been seen yet.

Currently Capsicum is available on FreeBSD 10 and later
and there is a port to Linux too.

Thanks to Loganaden Velvindron for help.
2015-03-31 22:19:34 +03:00
Lasse Collin 3717885f9e Bump version to 5.3.0alpha and soname to 5.3.99.
The idea of 99 is that it looks a bit weird in this context.
For new features there's no API/ABI stability in devel versions.
2015-03-30 22:44:02 +03:00
Lasse Collin 25263fd9e7 Fix the detection of installed RAM on QNX.
The earlier version compiled but didn't actually work
since sysconf(_SC_PHYS_PAGES) always fails (or so I was told).

Thanks to Ole André Vadla Ravnås for the patch and testing.
2015-03-29 22:13:48 +03:00
Lasse Collin e0ea6737b0 xz: size_t/uint32_t cleanup in options.c. 2015-03-07 22:05:57 +02:00
Lasse Collin 8bcca29a65 xz: Fix a comment and silence a warning in message.c. 2015-03-07 22:04:23 +02:00
Lasse Collin f243f5f44c liblzma: Silence more uint32_t vs. size_t warnings. 2015-03-07 22:01:00 +02:00
Lasse Collin 7f0a4c50f4 xz: Make arg_count an unsigned int to silence a warning.
Actually the value of arg_count cannot exceed INT_MAX
but it's nicer as an unsigned int.
2015-03-07 19:54:00 +02:00
Lasse Collin f6ec468015 liblzma: Fix a warning in index.c. 2015-03-07 19:33:17 +02:00
Lasse Collin dec11497a7 Bump version and soname for 5.2.1. 2015-02-26 16:53:44 +02:00
Lasse Collin 7a11c4a8e5 xz: Use pipe2() if available. 2015-02-22 19:38:48 +02:00
Lasse Collin 117d962685 liblzma: Fix a compression-ratio regression in LZMA1/2 in fast mode.
The bug was added in the commit
f48fce093b and thus
affected 5.1.4beta and 5.2.0. Luckily the bug cannot
cause data corruption or other nasty things.
2015-02-21 23:40:26 +02:00
Lasse Collin ae984e31c1 xz: Fix the fcntl() usage when creating a pipe for the self-pipe trick.
Now it reads the old flags instead of blindly setting O_NONBLOCK.
The old code may have worked correctly, but this is better.
2015-02-21 23:00:19 +02:00
Lasse Collin d935b0cdf3 tuklib_cpucores: Use cpuset_getaffinity() on FreeBSD if available.
In FreeBSD, cpuset_getaffinity() is the preferred way to get
the number of available cores.

Thanks to Rui Paulo for the patch. I edited it slightly, but
hopefully I didn't break anything.
2015-02-10 15:28:30 +02:00
Lasse Collin eb61bc58c2 xzdiff: Make the mktemp usage compatible with FreeBSD's mktemp.
Thanks to Rui Paulo for the fix.
2015-02-09 22:08:37 +02:00
Lasse Collin b9a5b6b7a2 Add a few casts to tuklib_integer.h to silence possible warnings.
I heard that Visual Studio 2013 gave warnings without the casts.

Thanks to Gabi Davar.
2015-02-03 21:45:53 +02:00
Lasse Collin c45757135f liblzma: Set LZMA_MEMCMPLEN_EXTRA depending on the compare method. 2015-01-26 21:24:39 +02:00
Lasse Collin fec88d41e6 liblzma: Silence harmless Valgrind errors.
Thanks to Torsten Rupp for reporting this. I had
forgotten to run Valgrind before the 5.2.0 release.
2015-01-26 20:39:28 +02:00
Lasse Collin a9b45badfe xz: Fix comments. 2015-01-09 21:50:19 +02:00
Lasse Collin 4170edc914 xz: Don't fail if stdout doesn't support O_NONBLOCK.
This is similar to the case with stdin.

Thanks to Brad Smith for the bug report and testing
on OpenBSD.
2015-01-09 21:34:06 +02:00
Lasse Collin 04bbc0c284 xz: Fix a memory leak in DOS-specific code. 2015-01-07 19:18:20 +02:00
Lasse Collin f0f1f6c723 xz: Don't fail if stdin doesn't support O_NONBLOCK.
It's a problem at least on OpenBSD which doesn't support
O_NONBLOCK on e.g. /dev/null. I'm not surprised if it's
a problem on other OSes too since this behavior is allowed
in POSIX-1.2008.

The code relying on this behavior was committed in June 2013
and included in 5.1.3alpha released on 2013-10-26. Clearly
the development releases only get limited testing.
2015-01-07 19:08:06 +02:00
Lasse Collin 6060f7dc76 Bump version and soname for 5.2.0.
I know that soname != app version, but I skip AGE=1
in -version-info to make the soname match the liblzma
version anyway. It doesn't hurt anything as long as
it doesn't conflict with library versioning rules.
2014-12-21 18:11:17 +02:00
Lasse Collin 2cb82ff21c Fix build when --disable-threads is used. 2014-12-21 18:00:38 +02:00
Lasse Collin 42e97a3264 xz: Fix a comment. 2014-12-21 14:07:54 +02:00
Lasse Collin 7f7d093de7 xz: Update the man page about --threads. 2014-12-16 21:00:09 +02:00
Lasse Collin 009823448b xz: Update the man page about --block-size. 2014-12-16 20:57:43 +02:00
Lasse Collin 1190c641af liblzma: Document how lzma_mt.block_size affects memory usage. 2014-12-02 20:04:07 +02:00
Lasse Collin 34f9e40a0a Remove LZMA_UNSTABLE macro. 2014-11-26 20:12:27 +02:00
Lasse Collin 6d9c0ce9f2 liblzma: Update lzma_stream_encoder_mt() API docs. 2014-11-26 20:10:33 +02:00
Lasse Collin 2301f3f05d liblzma: Verify the filter chain in threaded encoder initialization.
This way an invalid filter chain is detected at the Stream
encoder initialization instead of delaying it to the first
call to lzma_code() which triggers the initialization of
the actual filter encoder(s).
2014-11-25 12:32:05 +02:00
Lasse Collin 7b03a15cea xzdiff: Use mkdir if mktemp isn't available. 2014-11-10 18:54:40 +02:00
Lasse Collin f8c13e5e36 xzdiff: Create a temporary directory to hold a temporary file.
This avoids the possibility of "File name too long" when
creating a temp file when the input file name is very long.

This also means that other users on the system can no longer
see the input file names in /tmp (or whatever $TMPDIR is)
since the temporary directory will have a generic name. This
usually doesn't matter since on many systems one can see
the arguments given to all processes anyway.

The number X chars to mktemp where increased from 6 to 10.

Note that with some shells temp files or dirs won't be used at all.
2014-11-10 18:45:01 +02:00
Lasse Collin 7716dcf9df liblzma: Fix lzma_mt.preset in lzma_stream_encoder_mt_memusage().
It read the filter chain from a wrong variable. This is a similar
bug that was fixed in 9494fb6d0f.
2014-11-10 15:38:47 +02:00
Lasse Collin c923b140b2 Build: Prepare to support Automake's subdir-objects.
Due to a bug in Automake, subdir-objects won't be enabled
for now.

http://debbugs.gnu.org/cgi/bugreport.cgi?bug=17354

Thanks to Daniel Richard G. for the original patches.
2014-10-29 21:15:35 +02:00
Lasse Collin 076258cc45 Add support for AmigaOS/AROS to tuklib_physmem().
Thanks to Fredrik Wikstrom.
2014-10-09 19:41:51 +03:00
Lasse Collin efa7b0a210 xzgrep: Avoid passing both -q and -l to grep.
The behavior of grep -ql varies:
  - GNU grep behaves like grep -q.
  - OpenBSD grep behaves like grep -l.

POSIX doesn't make it 100 % clear what behavior is expected.
Anyway, using both -q and -l at the same time makes no sense
so both options simply should never be used at the same time.

Thanks to Christian Weisgerber.
2014-10-09 18:42:14 +03:00
Lasse Collin d62028b4c1 liblzma: Fix a portability problem in Makefile.am.
POSIX supports $< only in inference rules (suffix rules).
Using it elsewhere is a GNU make extension and doesn't
work e.g. with OpenBSD make.

Thanks to Christian Weisgerber for the patch.
2014-09-20 19:42:56 +03:00
Lasse Collin c35de31d42 Bump the version number to 5.1.4beta. 2014-09-14 21:54:09 +03:00
Lasse Collin 6b5e3b9eff xz: Add --ignore-check. 2014-08-05 22:32:36 +03:00
Lasse Collin 9adbc2ff37 liblzma: Add support for LZMA_IGNORE_CHECK. 2014-08-05 22:15:07 +03:00
Lasse Collin 0e0f34b8e4 liblzma: Add support for lzma_block.ignore_check.
Note that this slightly changes how lzma_block_header_decode()
has been documented. Earlier it said that the .version is set
to the lowest required value, but now it says that the .version
field is kept unchanged if possible. In practice this doesn't
affect any old code, because before this commit the only
possible .version was 0.
2014-08-05 22:03:30 +03:00
Lasse Collin 71e1437ab5 liblzma: Use lzma_memcmplen() in the BT3 match finder.
I had missed this when writing the commit
5db75054e9.

Thanks to Jun I Jin.
2014-08-04 19:25:58 +03:00
Lasse Collin 5dcffdbcc2 liblzma: SHA-256: Optimize the Maj macro slightly.
The Maj macro is used where multiple things are added
together, so making Maj a sum of two expressions allows
some extra freedom for the compiler to schedule the
instructions.

I learned this trick from
<http://www.hackersdelight.org/corres.txt>.
2014-08-03 21:32:25 +03:00
Lasse Collin a9477d1e0c liblzma: SHA-256: Optimize the way rotations are done.
This looks weird because the rotations become sequential,
but it helps quite a bit on both 32-bit and 64-bit x86:

  - It requires fewer instructions on two-operand
    instruction sets like x86.

  - It requires one register less which matters especially
    on 32-bit x86.

I hope this doesn't hurt other archs.

I didn't invent this idea myself, but I don't remember where
I saw it first.
2014-08-03 21:08:12 +03:00
Lasse Collin 5a76c7c8ee liblzma: SHA-256: Remove the GCC #pragma that became unneeded.
The unrolling in the previous commit should avoid the
situation where a compiler may think that an uninitialized
variable might be accessed.
2014-08-03 20:38:13 +03:00
Lasse Collin 9a096f8e57 liblzma: SHA-256: Unroll a little more.
This way a branch isn't needed for each operation
to choose between blk0 and blk2, and still the code
doesn't grow as much as it would with full unrolling.
2014-08-03 20:33:38 +03:00
Lasse Collin bc7650d87b liblzma: SHA-256: Do the byteswapping without a temporary buffer. 2014-08-03 19:56:43 +03:00
Lasse Collin 544aaa3d13 liblzma: Use lzma_memcmplen() in normal mode of LZMA.
Two locations were not changed yet because the simplest change
assumes that the initial "len" may be greater than "limit".
2014-07-25 22:38:28 +03:00
Lasse Collin f48fce093b liblzma: Simplify LZMA fast mode code by using memcmp(). 2014-07-25 22:30:38 +03:00
Lasse Collin 6bf5308e34 liblzma: Use lzma_memcmplen() in fast mode of LZMA. 2014-07-25 22:29:49 +03:00
Lasse Collin 5db75054e9 liblzma: Use lzma_memcmplen() in the match finders.
This doesn't change the match finder output.
2014-07-25 21:15:07 +03:00
Lasse Collin e1c8f1d01f liblzma: Add lzma_memcmplen() for fast memory comparison.
This commit just adds the function. Its uses will be in
separate commits.

This hasn't been tested much yet and it's perhaps a bit early
to commit it but if there are bugs they should get found quite
quickly.

Thanks to Jun I Jin from Intel for help and for pointing out
that string comparison needs to be optimized in liblzma.
2014-07-25 20:57:20 +03:00
Lasse Collin 17215f751c xz: Update the help message of a few options.
Updated: --threads, --block-size, and --block-list
Added: --flush-timeout
2014-06-29 20:54:14 +03:00
Lasse Collin 96864a6ddf xz: Use lzma_cputhreads() instead of own copy of tuklib_cpucores(). 2014-06-18 22:07:06 +03:00
Lasse Collin a115cc3748 liblzma: Add lzma_cputhreads(). 2014-06-18 22:04:24 +03:00
Lasse Collin 3ce3e79769 xz: Check for filter chain compatibility for --flush-timeout.
This avoids LZMA_PROG_ERROR from lzma_code() with filter chains
that don't support LZMA_SYNC_FLUSH.
2014-06-18 19:11:52 +03:00
Lasse Collin ceca379017 xzgrep: exit 0 when at least one file matches.
Mimic the original grep behavior and return exit_success when
at least one xz compressed file matches given pattern.

Original bugreport:
https://bugzilla.redhat.com/show_bug.cgi?id=1108085

Thanks to Pavel Raiskup for the patch.
2014-06-11 20:43:28 +03:00
Lasse Collin 8c19216bac xz: Force single-threaded mode when --flush-timeout is used. 2014-06-09 21:21:24 +03:00
Lasse Collin da1718f266 liblzma: Use lzma_alloc_zero() in LZ encoder initialization.
This avoids a memzero() call for a newly-allocated memory,
which can be expensive when encoding small streams with
an over-sized dictionary.

To avoid using lzma_alloc_zero() for memory that doesn't
need to be zeroed, lzma_mf.son is now allocated separately,
which requires handling it separately in normalize() too.

Thanks to Vincenzo Innocente for reporting the problem.
2014-05-25 21:45:56 +03:00
Lasse Collin 28af24e9cf liblzma: Add the internal function lzma_alloc_zero(). 2014-05-25 19:25:57 +03:00
Lasse Collin ed9ac85822 xz: Fix uint64_t vs. size_t which broke 32-bit build.
Thanks to Christian Hesse.
2014-05-08 18:03:09 +03:00
Lasse Collin 4d5b7b3fda liblzma: Rename the private API header lzma/lzma.h to lzma/lzma12.h.
It can be confusing that two header files have the same name.
The public API file is still lzma.h.
2014-05-04 11:07:17 +03:00
Lasse Collin 1555a9c566 Build: Fix the combination of --disable-xzdec --enable-lzmadec.
In this case "make install" could fail if the man page directory
didn't already exist at the destination. If it did exist, a
dangling symlink was created there. Now the link is omitted
instead. This isn't the best fix but it's better than the old
behavior.
2014-04-25 17:53:42 +03:00
Lasse Collin 54df428799 xz: Rename a variable to avoid a namespace collision on Solaris.
I don't know the details but I have an impression that there's
no problem in practice if using GCC since people have built xz
with GCC (without patching xz), but renaming the variable cannot
hurt either.

Thanks to Mark Ashley.
2014-04-09 17:26:10 +03:00
Lasse Collin 9494fb6d0f liblzma: Fix lzma_mt.preset not working with lzma_stream_encoder_mt().
It read the filter chain from a wrong variable.
2014-01-29 20:13:51 +02:00
Lasse Collin 673a4cb53d liblzma: Fix typo in a comment. 2014-01-20 11:20:40 +02:00
Lasse Collin 3d5c090872 xz: Fix a comment. 2014-01-12 17:41:14 +02:00
Lasse Collin 69fd4e1c93 Windows: Add MSVC defines for inline and restrict keywords. 2014-01-12 17:04:33 +02:00
Lasse Collin a19d9e8575 liblzma: Avoid C99 compound literal arrays.
MSVC 2013 doesn't like them. Maybe they aren't so good
for readability either since many aren't used to them.
2014-01-12 16:44:52 +02:00
Lasse Collin e28528f1c8 liblzma: Remove a useless C99ism from sha256.c.
Unsurprisingly it makes no difference in compiled output.
2014-01-12 12:50:30 +02:00
Lasse Collin 5ad1effc45 xz: Fix use of wrong variable.
Since the only call to suffix_set() uses optarg
as the argument, fixing this bug doesn't change
the behavior of the program.
2014-01-12 12:17:08 +02:00
Lasse Collin 3e62c68d75 Fix typos in comments. 2014-01-12 12:11:36 +02:00
Lasse Collin b22e94d8d1 liblzma: Document the need for block->check for lzma_block_header_decode().
Thanks to Tomer Chachamu.
2013-11-26 18:20:09 +02:00
Lasse Collin d1cd8b1cb8 xz: Update the man page about --block-size and --block-list. 2013-11-12 16:38:57 +02:00
Lasse Collin dd750acbe2 xz: Make --block-list and --block-size work together in single-threaded.
Previously, --block-list and --block-size only worked together
in threaded mode. Boundaries are specified by --block-list, but
--block-size specifies the maximum size for a Block. Now this
works in single-threaded mode too.

Thanks to James M Leddy for the original patch.
2013-11-12 16:29:48 +02:00
Lasse Collin ae222fe980 Bump the version number to 5.1.3alpha. 2013-10-26 13:26:14 +03:00
Lasse Collin 841da0352d xz: Document behavior of --block-list with threads.
This needs to be updated before 5.2.0.
2013-10-25 22:41:28 +03:00
Lasse Collin 56feb8665b xz: Document --flush-timeout=TIMEOUT on the man page. 2013-10-22 20:03:12 +03:00
Lasse Collin ba413da1d5 xz: Take advantage of LZMA_FULL_BARRIER with --block-list.
Now if --block-list is used in threaded mode, the encoder
won't need to flush at each Block boundary specified via
--block-list. This improves performance a lot, making
threading helpful with --block-list.

The flush timer was reset after LZMA_FULL_FLUSH but since
LZMA_FULL_BARRIER doesn't flush, resetting the timer is
no longer done.
2013-10-22 19:51:55 +03:00
Lasse Collin 0cd45fc2bc liblzma: Support LZMA_FULL_FLUSH and _BARRIER in threaded encoder.
Now --block-list=SIZES works with in the threaded mode too,
although the performance is still bad due to the use of
LZMA_FULL_FLUSH instead of the new LZMA_FULL_BARRIER.
2013-10-02 20:05:23 +03:00
Lasse Collin 97bb38712f liblzma: Add LZMA_FULL_BARRIER support to single-threaded encoder.
In the single-threaded encoder LZMA_FULL_BARRIER is simply
an alias for LZMA_FULL_FLUSH.
2013-10-02 12:55:11 +03:00
Lasse Collin fef0c6b410 liblzma: Add block_buffer_encoder.h into Makefile.inc.
This should have been in b465da5988.
2013-09-17 11:57:51 +03:00
Lasse Collin 8083e03291 xz: Add a missing test for TUKLIB_DOSLIKE. 2013-09-17 11:55:38 +03:00
Lasse Collin 6b44b4a775 Add native threading support on Windows.
Now liblzma only uses "mythread" functions and types
which are defined in mythread.h matching the desired
threading method.

Before Windows Vista, there is no direct equivalent to
pthread condition variables. Since this package doesn't
use pthread_cond_broadcast(), pre-Vista threading can
still be kept quite simple. The pre-Vista code doesn't
use anything that wasn't already available in Windows 95,
so the binaries should run even on Windows 95 if someone
happens to care.
2013-09-17 11:52:28 +03:00
Lasse Collin 72975df6c8 Build: Create liblzma.pc in a src/liblzma/Makefile.am.
Previously it was done in configure, but doing that goes
against the Autoconf manual. Autoconf requires that it is
possible to override e.g. prefix after running configure
and that doesn't work correctly if liblzma.pc is created
by configure.

A potential downside of this change is that now e.g.
libdir in liblzma.pc is a standalone string instead of
being defined via ${prefix}, so if one overrides prefix
when running pkg-config the libdir won't get the new value.
I don't know if this matters in practice.

Thanks to Vincent Torri.
2013-09-09 20:37:03 +03:00
Lasse Collin 1c2b6e7e83 Fix the previous commit which broke the build.
Apparently I didn't even compile-test the previous commit.

Thanks to Christian Hesse.
2013-08-04 15:24:09 +03:00
Lasse Collin 124eb69c78 Windows: Add Windows support to tuklib_cpucores().
It is used for Cygwin too. I'm not sure if that is
a good or bad idea.

Thanks to Vincent Torri.
2013-08-03 13:52:58 +03:00
Lasse Collin dee6ad3d59 xz: Add preliminary support for --flush-timeout=TIMEOUT.
When --flush-timeout=TIMEOUT is used, xz will use
LZMA_SYNC_FLUSH if read() would block and at least
TIMEOUT milliseconds has elapsed since the previous flush.

This can be useful in realtime-like use cases where the
data is simultanously decompressed by another process
(possibly on a different computer). If new uncompressed
input data is produced slowly, without this option xz could
buffer the data for a long time until it would become
decompressible from the output.

If TIMEOUT is 0, the feature is disabled. This is the default.

This commit affects the compression side. Using xz for
the decompression side for the above purpose doesn't work
yet so well because there is quite a bit of input and
output buffering when decompressing.

The --long-help or man page were not updated yet.
The details of this feature may change.
2013-07-04 14:18:46 +03:00
Lasse Collin fa381acaf9 xz: Don't set src_eof=true after an I/O error because it's useless. 2013-07-04 13:41:03 +03:00
Lasse Collin ea00545bea xz: Fix the test when to read more input.
Testing for end of file was no longer correct after full flushing
became possible with --block-size=SIZE and --block-list=SIZES.
There was no bug in practice though because xz just made a few
unneeded zero-byte reads.
2013-07-04 13:25:11 +03:00
Lasse Collin 736903c64b xz: Move some of the timing code into mytime.[hc].
This switches units from microseconds to milliseconds.

New clock_gettime(CLOCK_MONOTONIC) will be used if available.
There is still a fallback to gettimeofday().
2013-07-04 12:51:57 +03:00
Lasse Collin c0627b3fce xz: Silence a warning seen with _FORTIFY_SOURCE=2.
Thanks to Christian Hesse.
2013-07-01 14:34:11 +03:00
Lasse Collin a37ae8b5eb Man pages: Use similar syntax for synopsis as in xz.
The man pages of lzmainfo, xzmore, and xzdec had similar
constructs as the man page of xz had before the commit
eb6ca9854b. Eric S. Raymond
didn't mention these man pages in his bug report, but
it's nice to be consistent.
2013-06-30 18:02:27 +03:00
Lasse Collin cdba9ddd87 xz: Use non-blocking I/O for the output file.
Now both reading and writing should be without
race conditions with signals.

They might still be signal handling issues left.
Signals are blocked during many operations to avoid
EINTR but it may cause problems e.g. if writing to
stderr blocks when trying to display an error message.
2013-06-29 15:59:13 +03:00
Lasse Collin e61a5c95da xz: Fix return value type in io_write_buf().
It didn't affect the behavior of the code since -1
becomes true anyway.
2013-06-28 23:56:17 +03:00
Lasse Collin 9dc319eabb xz: Use the self-pipe trick to avoid a race condition with signals.
It is possible that a signal to set user_abort arrives right
before a blocking system call is made. In this case the call
may block until another signal arrives, while the wanted
behavior is to make xz clean up and exit as soon as possible.

After this commit, the race condition is avoided with the
input side which already uses non-blocking I/O. The output
side still uses blocking I/O and thus has the race condition.
2013-06-28 23:48:05 +03:00
Lasse Collin 3541bc79d0 xz: Use non-blocking I/O for the input file. 2013-06-28 22:51:02 +03:00
Lasse Collin 78673a08be xz: Remove an outdated NetBSD-specific comment.
Nowadays errno == EFTYPE is documented in open(2).
2013-06-28 18:46:13 +03:00
Lasse Collin a616fdad34 xz: Fix error detection of fcntl(fd, F_SETFL, flags) calls.
POSIX says that fcntl(fd, F_SETFL, flags) returns -1 on
error and "other than -1" on success. This is how it is
documented e.g. on OpenBSD too. On Linux, success with
F_SETFL is always 0 (at least accorinding to fcntl(2)
from man-pages 3.51).
2013-06-28 18:09:47 +03:00
Lasse Collin 4a08a6e4c6 xz: Fix use of wrong variable in a fcntl() call.
Due to a wrong variable name, when writing a sparse file
to standard output, *all* file status flags were cleared
(to the extent the operating system allowed it) instead of
only clearing the O_APPEND flag. In practice this worked
fine in the common situations on GNU/Linux, but I didn't
check how it behaved elsewhere.

The original flags were still restored correctly. I still
changed the code to use a separate boolean variable to
indicate when the flags should be restored instead of
relying on a special value in stdout_flags.
2013-06-28 17:36:47 +03:00
Lasse Collin b790b435da xz: Fix assertion related to posix_fadvise().
Input file can be a FIFO or something else that doesn't
support posix_fadvise() so don't check the return value
even with an assertion. Nothing bad happens if the call
to posix_fadvise() fails.
2013-06-28 14:55:37 +03:00
Lasse Collin 84d2da6c9d xz: Check the value of lzma_stream_flags.version in --list.
It is a no-op for now, but if an old xz version is used
together with a newer liblzma that supports something new,
then this check becomes important and will stop the old xz
from trying to parse files that it won't understand.
2013-06-26 13:30:57 +03:00
Lasse Collin 46540e4c10 liblzma: Avoid a warning about a shadowed variable.
On Mac OS X wait() is declared in <sys/wait.h> that
we include one way or other so don't use "wait" as
a variable name.

Thanks to Christian Kujau.
2013-06-23 18:57:23 +03:00
Lasse Collin ebb501ec73 xz: Validate Uncompressed Size from Block Header in list.c.
This affects only "xz -lvv". Normal decompression with xz
already detected if Block Header and Index had mismatched
Uncompressed Size fields. So this just makes "xz -lvv"
show such files as corrupt instead of showing the
Uncompressed Size from Index.
2013-06-23 17:36:47 +03:00
Lasse Collin eb6ca9854b xz: Make the man page more friendly to doclifter.
Thanks to Eric S. Raymond.
2013-06-21 22:04:45 +03:00
Lasse Collin 0c0a1947e6 xz: A couple of man page fixes.
Now the interaction of presets and custom filter chains
is described correctly. Earlier it contradicted itself.

Thanks to DevHC who reported these issues on IRC to me
on 2012-12-14.
2013-06-21 21:54:59 +03:00
Lasse Collin 2fcda89939 xz: Fix interaction between preset and custom filter chains.
There was somewhat illogical behavior when --extreme was
specified and mixed with custom filter chains.

Before this commit, "xz -9 --lzma2 -e" was equivalent
to "xz --lzma2". After it is equivalent to "xz -6e"
(all earlier preset options get forgotten when a custom
filter chain is specified and the default preset is 6
to which -e is applied). I find this less illogical.

This also affects the meaning of "xz -9e --lzma2 -7".
Earlier it was equivalent to "xz -7e" (the -e specified
before a custom filter chain wasn't forgotten). Now it
is "xz -7". Note that "xz -7e" still is the same as "xz -e7".

Hopefully very few cared about this in the first place,
so pretty much no one should even notice this change.

Thanks to Conley Moorhous.
2013-06-21 21:50:26 +03:00
Lasse Collin 8957c58609 xzdec: Improve the --help message.
The options are now ordered in the same order as in xz's help
message.

Descriptions were added to the options that are ignored.
I left them in parenthesis even if it looks a bit weird
because I find it easier to spot the ignored vs. non-ignored
options from the list that way.
2013-04-15 19:29:09 +03:00
Jeff Bastian 5019413a05 xzgrep: make the '-h' option to be --no-filename equivalent
* src/scripts/xzgrep.in: Accept the '-h' option in argument parsing.
2013-04-05 19:14:50 +03:00
Lasse Collin 5ea900cb5a liblzma: Be less picky in lzma_alone_decoder().
To avoid false positives when detecting .lzma files,
rare values in dictionary size and uncompressed size fields
were rejected. They will still be rejected if .lzma files
are decoded with lzma_auto_decoder(), but when using
lzma_alone_decoder() directly, such files will now be accepted.
Hopefully this is an OK compromise.

This doesn't affect xz because xz still has its own file
format detection code. This does affect lzmadec though.
So after this commit lzmadec will accept files that xz or
xz-emulating-lzma doesn't.

NOTE: lzma_alone_decoder() still won't decode all .lzma files
because liblzma's LZMA decoder doesn't support lc + lp > 4.

Reported here:
http://sourceforge.net/projects/lzmautils/forums/forum/708858/topic/7068827
2013-03-23 22:25:15 +02:00
Lasse Collin bb117fffa8 liblzma: Use lzma_block_buffer_bound64() in threaded encoder.
Now it uses lzma_block_uncomp_encode() if the data doesn't
fit into the space calculated by lzma_block_buffer_bound64().
2013-03-23 21:55:13 +02:00
Lasse Collin e572e123b5 liblzma: Fix another deadlock in the threaded encoder.
This race condition could cause a deadlock if lzma_end() was
called before finishing the encoding. This can happen with
xz with debugging enabled (non-debugging version doesn't
call lzma_end() before exiting).
2013-03-23 21:51:38 +02:00
Lasse Collin b465da5988 liblzma: Add lzma_block_uncomp_encode().
This also adds a new internal function
lzma_block_buffer_bound64() which is similar to
lzma_block_buffer_bound() but uses uint64_t instead
of size_t.
2013-03-23 19:17:33 +02:00
Lasse Collin 9e6dabcf22 Avoid unneeded use of awk in xzless.
Use "read" instead of "awk" in xzless to get the version
number of "less". The need for awk was introduced in
the commit db5c1817fa.

Thanks to Ariel P for the patch.
2013-03-05 19:14:50 +02:00
Lasse Collin e7b424d267 Make the progress indicator smooth in threaded mode.
This adds lzma_get_progress() to liblzma and takes advantage
of it in xz.

lzma_get_progress() collects progress information from
the thread-specific structures so that fairly accurate
progress information is available to applications. Adding
a new function seemed to be a better way than making the
information directly available in lzma_stream (like total_in
and total_out are) because collecting the information requires
locking mutexes. It's waste of time to do it more often than
the up to date information is actually needed by an application.
2012-12-14 20:13:32 +02:00
Lasse Collin 2ebbb994e3 liblzma: Fix mythread_sync for nested locking. 2012-12-14 11:01:41 +02:00
Lasse Collin 4c7e28705f xz: Mention --threads in --help.
Thanks to Olivier Delhomme for pointing out that this
was still missing.
2012-12-13 21:05:36 +02:00
Jonathan Nieder db5c1817fa xzless: Make "less -V" parsing more robust
In v4.999.9beta~30 (xzless: Support compressed standard input,
2009-08-09), xzless learned to parse ‘less -V’ output to figure out
whether less is new enough to handle $LESSOPEN settings starting
with “|-”.  That worked well for a while, but the version string from
‘less’ versions 448 (June, 2012) is misparsed, producing a warning:

	$ xzless /tmp/test.xz; echo $?
	/usr/bin/xzless: line 49: test: 456 (GNU regular expressions): \
	integer expression expected
	0

More precisely, modern ‘less’ lists the regexp implementation along
with its version number, and xzless passes the entire version number
with attached parenthetical phrase as a number to "test $a -gt $b",
producing the above confusing message.

	$ less-444 -V | head -1
	less 444
	$ less -V | head -1
	less 456 (no regular expressions)

So relax the pattern matched --- instead of expecting "less <number>",
look for a line of the form "less <number>[ (extra parenthetical)]".
While at it, improve the behavior when no matching line is found ---
instead of producing a cryptic message, we can fall back on a LESSPIPE
setting that is supported by all versions of ‘less’.

The implementation uses "awk" for simplicity.  Hopefully that’s
portable enough.

Reported-by: Jörg-Volker Peetz <jvpeetz@web.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
2012-11-21 19:19:44 +02:00
Lasse Collin 65536214a3 xz: Fix the note about --rsyncable on the man page. 2012-10-03 15:54:24 +03:00
Lasse Collin 3d93b63549 xz: Improve handling of failed realloc in xrealloc.
Thanks to Jim Meyering.
2012-09-28 20:11:09 +03:00
Lasse Collin ab22562066 A few typo fixes to comments and the xz man page.
Thanks to Jim Meyering.
2012-08-24 16:27:31 +03:00
Lasse Collin f3c1ec69d9 xz: Add a warning to --help about alpha and beta versions. 2012-08-13 21:40:09 +03:00
Lasse Collin 3778db1be5 liblzma: Make the use of lzma_allocator const-correct.
There is a tiny risk of causing breakage: If an application
assigns lzma_stream.allocator to a non-const pointer, such
code won't compile anymore. I don't know why anyone would do
such a thing though, so in practice this shouldn't cause trouble.

Thanks to Jan Kratochvil for the patch.
2012-07-17 18:19:59 +03:00
Lasse Collin d6e0b23d46 Build: Include validate_map.sh in the distribution.
It's required by "make mydist".

Fix also the location of EXTRA_DIST+= so that those files
get distributed also if symbol versioning isn't enabled.
2012-07-05 07:28:53 +03:00
Lasse Collin cafb523ada xz: Document --block-list better.
Thanks to Jonathan Nieder.
2012-07-04 22:31:58 +03:00
Lasse Collin c7ff218528 Bump the version number to 5.1.2alpha. 2012-07-04 20:01:49 +03:00
Lasse Collin 0d5fa05466 xz: Fix the version number printed by xz -lvv.
The decoder bug was fixed in 5.0.2 instead of 5.0.3.
2012-07-04 19:58:23 +03:00
Lasse Collin 88ccf47205 xz: Add incomplete support for --block-list.
It's broken with threads and when also --block-size is used.
2012-07-03 21:16:39 +03:00
Lasse Collin 972179cdcd xz: Update the man page about the new field in --robot -lvv. 2012-07-01 18:44:33 +03:00
Lasse Collin 1403707fc6 liblzma: Check that the first byte of range encoded data is 0x00.
It is just to be more pedantic and thus perhaps catch broken
files slightly earlier.
2012-06-28 10:47:49 +03:00
Lasse Collin 2e6754eac2 xz: Update man page date to match the latest update. 2012-06-22 14:34:03 +03:00
Lasse Collin d8db706acb liblzma: Fix possibility of incorrect LZMA_BUF_ERROR.
lzma_code() could incorrectly return LZMA_BUF_ERROR if
all of the following was true:

  - The caller knows how many bytes of output to expect
    and only provides that much output space.

  - When the last output bytes are decoded, the
    caller-provided input buffer ends right before
    the LZMA2 end of payload marker. So LZMA2 won't
    provide more output anymore, but it won't know it
    yet and thus won't return LZMA_STREAM_END yet.

  - A BCJ filter is in use and it hasn't left any
    unfiltered bytes in the temp buffer. This can happen
    with any BCJ filter, but in practice it's more likely
    with filters other than the x86 BCJ.

Another situation where the bug can be triggered happens
if the uncompressed size is zero bytes and no output space
is provided. In this case the decompression can fail even
if the whole input file is given to lzma_code().

A similar bug was fixed in XZ Embedded on 2011-09-19.
2012-05-28 20:42:11 +03:00
Lasse Collin 7769ea051d xz: Don't show a huge number in -vv when memory limit is disabled. 2012-05-28 15:37:43 +03:00
Lasse Collin ec92110572 xz: Document the "summary" lines of --robot -lvv.
This documents only the columns that are in v5.0.
The new columns added in the master branch aren't
necessarily stable yet.
2012-05-27 22:30:17 +03:00
Lasse Collin 27d24eb0a9 xz: Fix output of verbose --robot --list modes.
It printed the filename in "filename (x/y)" format
which it obviously shouldn't do in robot mode.
2012-05-27 21:53:20 +03:00
Lasse Collin aac1b31ea4 liblzma: Remove outdated comments. 2012-04-19 15:25:26 +03:00
Lasse Collin 03ed742a3a liblzma: Fix Libs.private in liblzma.pc to include -lrt when needed. 2012-04-19 14:02:25 +03:00
Lasse Collin cff070aba6 Fix exit status of xzgrep when grepping binary files.
When grepping binary files, grep may exit before it has
read all the input. In this case, gzip -q returns 2 (eating
SIGPIPE), but xz and bzip2 show SIGPIPE as the exit status
(e.g. 141). This causes wrong exit status when grepping
xz- or bzip2-compressed binary files.

The fix checks for the special exit status that indicates SIGPIPE.
It uses kill -l which should be supported everywhere since it
is in both SUSv2 (1997) and POSIX.1-2008.

Thanks to James Buren for the bug report.
2012-02-22 14:02:34 +02:00
Lasse Collin 418fe668b3 xz: Show minimum required XZ Utils version in xz -lvv.
Man page wasn't updated yet.
2011-11-07 13:07:52 +02:00
Lasse Collin 7081d82c37 xz: Fix a typo in a comment.
Thanks to Bela Lubkin.
2011-11-04 17:57:16 +02:00
Lasse Collin 74d2bae4d3 xz: Fix xz on EBCDIC systems.
Thanks to Chris Donawa.
2011-11-03 17:07:22 +02:00
Lasse Collin ab50ae3ef4 liblzma: Fix invalid free() in the threaded encoder.
It was triggered if initialization failed e.g. due to
running out of memory.

Thanks to Arkadiusz Miskiewicz.
2011-10-23 17:08:14 +03:00
Lasse Collin 6b620a0f08 liblzma: Fix a deadlock in the threaded encoder.
It was triggered when reinitializing the encoder,
e.g. when encoding two files.
2011-10-23 17:05:55 +03:00
Lasse Collin 5b1e1f1074 Workaround unusual SIZE_MAX on SCO OpenServer. 2011-08-09 21:16:44 +03:00
Lasse Collin 1c673e5681 Fix exit status of "xzdiff foo.xz bar.xz".
xzdiff was clobbering the exit status from diff in a case
statement used to analyze the exit statuses from "xz" when
its operands were two compressed files. Save and restore
diff's exit status to fix this.

The bug is inherited from zdiff in GNU gzip and was fixed
there on 2009-10-09.

Thanks to Jonathan Nieder for the patch and
to Peter Pallinger for reporting the bug.
2011-07-31 11:01:47 +03:00
Lasse Collin 324cde7a86 liblzma: Remove unneeded semicolon. 2011-06-16 12:15:29 +03:00
Lasse Collin fc4d443696 Don't call close(-1) in tuklib_open_stdxxx() on error.
Thanks to Jim Meyering.
2011-05-28 16:43:26 +03:00
Lasse Collin bd35d903a0 liblzma: Use symbol versioning.
Symbol versioning is enabled by default on GNU/Linux,
other GNU-based systems, and FreeBSD.

I'm not sure how stable this is, so it may need
backward-incompatible changes before the next release.

The idea is that alpha and beta symbols are considered
unstable and require recompiling the applications that
use those symbols. Once a symbol is stable, it may get
extended with new features in ways that don't break
compatibility with older ABI & API.

The mydist target runs validate_map.sh which should
catch some probable problems in liblzma.map. Otherwise
I would forget to update the map file for new releases.
2011-05-28 15:55:39 +03:00
Lasse Collin c029744506 xz: Fix error handling in xz -lvv.
It could do an invalid free() and read past the end
of the uninitialized filters array.
2011-05-27 22:25:44 +03:00
Lasse Collin 8bd91918ac liblzma: Handle allocation failures correctly in lzma_index_init().
Thanks to Jim Meyering.
2011-05-27 22:09:49 +03:00
Lasse Collin 4161d76349 xz: Translate also the string used to print the program name.
French needs a space before a colon, e.g. "xz : foo error".
2011-05-21 15:12:10 +03:00
Lasse Collin b94aa0c838 liblzma: Try to use SHA-256 from the operating system.
If the operating system libc or other base libraries
provide SHA-256, use that instead of our own copy.
Note that this doesn't use OpenSSL or libgcrypt or
such libraries to avoid creating dependencies to
other packages.

This supports at least FreeBSD, NetBSD, OpenBSD, Solaris,
MINIX, and Darwin. They all provide similar but not
identical SHA-256 APIs; everyone is a little different.

Thanks to Wim Lewis for the original patch, improvements,
and testing.
2011-05-21 15:08:44 +03:00
Lasse Collin f004128678 Don't use clockid_t in mythread.h when clock_gettime() isn't available.
Thanks to Wim Lewis for the patch.
2011-05-17 12:52:18 +03:00
Lasse Collin 4c6e146df9 Add underscores to attributes (__attribute((__foo__))). 2011-05-17 11:54:38 +03:00
Lasse Collin 7a480e4859 xz: Fix input file position when --single-stream is used.
Now the following works as you would expect:

    echo foo | xz > foo.xz
    echo bar | xz >> foo.xz
    ( xz -dc --single-stream ; xz -dc --single-stream ) < foo.xz

Note that it doesn't work if the input is not seekable
or if there is Stream Padding between the concatenated
.xz Streams.
2011-05-01 12:24:23 +03:00
Lasse Collin c29e6630c1 xz: Print the maximum number of worker threads in xz -vv. 2011-05-01 12:15:51 +03:00
Lasse Collin 9c1b05828a Fix portability problems in mythread.h.
Use gettimeofday() if clock_gettime() isn't available
(e.g. Darwin).

The test for availability of pthread_condattr_setclock()
and CLOCK_MONOTONIC was incorrect. Instead of fixing the
#ifdefs, use an Autoconf test. That way if there exists a
system that supports them but doesn't specify the matching
POSIX #defines, the features will still get detected.

Don't try to use pthread_sigmask() on OpenVMS. It doesn't
have that function.

Guard mythread.h against being #included multiple times.
2011-04-19 09:20:44 +03:00
Martin Väth bd5002f582 xzgrep: fix typo in $0 parsing
Reported-by: Diego Elio Pettenò <flameeyes@gentoo.org>
Signed-off-by: Martin Väth <vaeth@mathematik.uni-wuerzburg.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-18 19:33:27 +03:00
Lasse Collin 6ef4eabc0a Bump the version number to 5.1.1alpha and liblzma soname to 5.0.99. 2011-04-12 12:48:31 +03:00
Lasse Collin 9a4377be0d Put the unstable APIs behind #ifdef LZMA_UNSTABLE.
This way people hopefully won't complain if these APIs
change and break code that used an older API.
2011-04-12 12:42:37 +03:00
Lasse Collin 3e321a3acd Remove doubled words from documentation and comments.
Spot candidates by running these commands:
  git ls-files |xargs perl -0777 -n \
    -e 'while (/\b(then?|[iao]n|i[fst]|but|f?or|at|and|[dt]o)\s+\1\b/gims)' \
    -e '{$n=($` =~ tr/\n/\n/ + 1); ($v=$&)=~s/\n/\\n/g; print "$ARGV:$n:$v\n"}'

Thanks to Jim Meyering for the original patch.
2011-04-12 11:59:49 +03:00
Lasse Collin 70e750f597 xz: Update the man page about threading. 2011-04-12 11:08:55 +03:00
Lasse Collin 24e0406c0f xz: Add support for threaded compression. 2011-04-11 22:06:03 +03:00
Lasse Collin de678e0c92 liblzma: Add lzma_stream_encoder_mt() for threaded compression.
This is the simplest method to do threading, which splits
the uncompressed data into blocks and compresses them
independently from each other. There's room for improvement
especially to reduce the memory usage, but nevertheless,
this is a good start.
2011-04-11 22:03:30 +03:00
Lasse Collin 25fe729532 liblzma: Add the forgotten lzma_lzma2_block_size().
This should have been in 5eefc0086d.
2011-04-11 21:15:07 +03:00
Lasse Collin 91afb785a1 liblzma: Document lzma_easy_(enc|dec)oder_memusage() better too. 2011-04-11 21:04:13 +03:00
Lasse Collin 4a9905302a liblzma: Document lzma_raw_(enc|dec)oder_memusage() better.
It didn't mention the return value that is used if
an error occurs.
2011-04-11 20:59:07 +03:00
Lasse Collin 0badb0b1bd liblzma: Use memzero() to initialize supported_actions[].
This is cleaner and makes it simpler to add new members
to lzma_action enumeration.
2011-04-11 19:28:18 +03:00
Lasse Collin a7934c446a liblzma: API comment about lzma_allocator with threaded coding. 2011-04-11 19:26:27 +03:00
Lasse Collin 5eefc0086d liblzma: Add an internal function lzma_mt_block_size().
This is based lzma_chunk_size() that was included in some
development version of liblzma.
2011-04-11 19:16:30 +03:00
Lasse Collin d119927475 liblzma: Don't create an empty Block in lzma_stream_buffer_encode().
Empty Block was created if the input buffer was empty.
Empty Block wastes a few bytes of space, but more importantly
it triggers a bug in XZ Utils 5.0.1 and older when trying
to decompress such a file. 5.0.1 and older consider such
files to be corrupt. I thought that no encoder creates empty
Blocks when releasing 5.0.2 but I was wrong.
2011-04-11 13:59:50 +03:00
Lasse Collin 3b22fc2c87 liblzma: Fix API docs to mention LZMA_UNSUPPORTED_CHECK.
This return value was missing from the API comments of
four functions.
2011-04-11 13:28:40 +03:00
Lasse Collin 71b9380145 liblzma: Validate encoder arguments better.
The biggest problem was that the integrity check type
wasn't validated, and e.g. lzma_easy_buffer_encode()
would create a corrupt .xz Stream if given an unsupported
Check ID. Luckily applications don't usually try to use
an unsupport Check ID, so this bug is unlikely to cause
many real-world problems.
2011-04-11 13:21:28 +03:00
Lasse Collin ec7e3dbad7 xz: Move the description of --block-size in --long-help. 2011-04-11 09:57:30 +03:00
Lasse Collin cd3086ff44 Docs: Document --single-stream and --block-size. 2011-04-11 09:55:35 +03:00
Lasse Collin fb64a49243 liblzma: Make lzma_stream_encoder_init() static (second try).
It's an internal function and it's not needed by
anything outside stream_encoder.c.
2011-04-11 09:27:57 +03:00
Lasse Collin a34730cf6a Revert "liblzma: Make lzma_stream_encoder_init() static."
This reverts commit 352ac82db5.
I don't know what I was thinking.
2011-04-11 08:31:42 +03:00
Lasse Collin 9f0a806aef Revise mythread.h.
This adds:

  - mythread_sync() macro to create synchronized blocks

  - mythread_cond structure and related functions
    and macros for condition variables with timed
    waiting using a relative timeout

  - mythread_create() to create a thread with all
    signals blocked

Some of these wouldn't need to be inline functions,
but I'll keep them this way for now for simplicity.

For timed waiting on a condition variable, librt is
now required on some systems to use clock_gettime().
configure.ac was updated to handle this.
2011-04-10 21:23:21 +03:00
Lasse Collin 352ac82db5 liblzma: Make lzma_stream_encoder_init() static.
It's an internal function and it's not needed by
anything outside stream_encoder.c.
2011-04-10 20:37:36 +03:00
Lasse Collin ebd54dbd6e xz/DOS: Add experimental 8.3 filename support.
This is incompatible with the 8.3 support patch made by
Juan Manuel Guerrero. I think this one is nicer, but
I need to get feedback from DOS users before saying
that this is the final version of 8.3 filename support.
2011-04-10 13:09:42 +03:00
Lasse Collin cd4fe97852 xz/DOS: Be more careful with the destination file.
Try to avoid overwriting the source file if --force is
used and the generated destination filename refers to
the source file. This can happen with 8.3 filenames where
extra characters are ignored.

If the generated output file refers to a special file
like "con" or "prn", refuse to write to it even if --force
is used.
2011-04-10 12:47:47 +03:00
Lasse Collin fca396b374 liblzma: Add missing #ifdefs to filter_common.c.
Passing --disable-decoders to configure broke a few
encoders due to missing #ifdefs in filter_common.c.

Thanks to Jason Gorski for the patch.
2011-04-09 18:28:58 +03:00
Lasse Collin b03f6cd3eb xz: Avoid unneeded fstat() on DOS-like systems. 2011-04-09 15:24:59 +03:00
Lasse Collin 335fe260a8 xz: Minor internal changes to handling of --threads.
Now it always defaults to one thread. Maybe this
will change again if a threading method is added
that doesn't affect memory usage.
2011-04-09 15:11:13 +03:00
Lasse Collin 9edd6ee895 xz: Change size_t to uint32_t in a few places. 2011-04-08 17:53:05 +03:00
Lasse Collin 411013ea45 xz: Fix a typo in a comment. 2011-04-08 17:48:41 +03:00
Lasse Collin b34c5ce4b2 liblzma: Use TUKLIB_GNUC_REQ to check GCC version in sha256.c. 2011-04-05 22:41:33 +03:00
Lasse Collin 1039bfcfc0 xz: Use posix_fadvise() if it is available. 2011-04-05 15:27:26 +03:00
Lasse Collin 1ef3cf44a8 xz: Call lzma_end(&strm) before exiting if debugging is enabled. 2011-04-05 15:13:29 +03:00
Lasse Collin bd432015d3 liblzma: Fix a memory leak in stream_encoder.c.
It leaks old filter options structures (hundred bytes or so)
every time the lzma_stream is reinitialized. With the xz tool,
this happens when compressing multiple files.
2011-04-02 14:49:56 +03:00
Lasse Collin 0d21f49a80 liblzma: Fix decoding of LZMA2 streams having no uncompressed data.
The decoder considered empty LZMA2 streams to be corrupt.
This shouldn't matter much with .xz files, because no encoder
creates empty LZMA2 streams in .xz. This bug is more likely
to cause problems in applications that use raw LZMA2 streams.
2011-03-31 11:54:48 +03:00
Lasse Collin 40277998cb Scripts: Better fix for xzgrep.
Now it uses "grep -q".

Thanks to Gregory Margo.
2011-03-24 01:42:49 +02:00
Lasse Collin c7210d9a3f Scripts: Fix xzgrep -l.
It didn't work at all. It tried to use the -q option
for grep, but it appended it after "--". This works
around it by redirecting to /dev/null. The downside
is that this can be slower with big files compared
to proper use of "grep -q".

Thanks to Gregory Margo.
2011-03-24 01:21:32 +02:00
Lasse Collin 4eb83e3204 Scripts: Add lzop (.lzo) support to xzdiff and xzgrep. 2011-03-19 13:08:22 +02:00
Lasse Collin 923b22483b xz: Add --block-size=SIZE.
This uses LZMA_FULL_FLUSH every SIZE bytes of input.

Man page wasn't updated yet.
2011-03-18 19:10:30 +02:00
Lasse Collin 57597d42ca xz: Add --single-stream.
This can be useful when there is garbage after the
compressed stream (.xz, .lzma, or raw stream).

Man page wasn't updated yet.
2011-03-18 18:19:19 +02:00
Lasse Collin 96f94bc925 xz: Clean up suffix.c.
struct suffix_pair isn't needed in compresed_name()
so get rid of it there.
2011-02-06 20:16:14 +02:00
Lasse Collin 8930c7ae3f xz: Check if the file already has custom suffix when compressing.
Now "xz -S .test foo.test" refuses to compress the
file because it already has the suffix .test. The man
page had it documented this way already.
2011-02-06 20:16:14 +02:00
Lasse Collin 6dd061adfd Merge commit '5fbce0b8d96dc96775aa0215e3581addc830e23d' 2011-02-06 20:13:01 +02:00
Lasse Collin 03ebd1bbb3 xz: Fix --force on setuid/setgid/sticky and multi-hardlink files.
xz didn't compress setuid/setgid/sticky files and files
with multiple hard links even with --force. This bug was
introduced in 23ac2c44c3.

Thanks to Charles Wilson.
2011-01-26 12:19:08 +02:00
Lasse Collin 9d542ceebc Merge branch 'v5.0' 2011-01-19 11:45:35 +02:00
Lasse Collin f71c4e16e9 Add alloc_size and malloc attributes to a few functions.
Thanks to Cristian Rodríguez for the original patch.
2011-01-18 21:23:50 +02:00
Lasse Collin 316cbe2446 Scripts: Fix gzip and bzip2 support in xzdiff. 2010-12-13 16:36:33 +02:00
Lasse Collin 4f2c69a4e3 Merge branch 'v5.0' 2010-12-12 23:13:22 +02:00
Lasse Collin ce56f63c41 Add missing PRIx32 and PRIx64 compatibility definitions.
This fixes portability to systems that lack C99 inttypes.h.

Thanks to Juan Manuel Guerrero.
2010-12-12 16:07:11 +02:00
Lasse Collin e6baedddcf DOS-like: Treat \ and : as directory separators in addition to /.
Juan Manuel Guerrero had fixed this in his XZ Utils port
to DOS/DJGPP. The bug affects also Windows and OS/2.
2010-12-12 14:50:04 +02:00
Lasse Collin 7c24e0d1b8 Merge branch 'v5.0' 2010-11-15 14:33:01 +02:00
Lasse Collin 3e564704bc liblzma: Document the return value of lzma_lzma_preset(). 2010-11-15 14:28:26 +02:00
Lasse Collin 974ebe6349 liblzma: Rename a few variables and constants.
This has no semantic changes. I find the new names slightly
more logical and they match the names that are already used
in XZ Embedded.

The name fastpos wasn't changed (not worth the hassle).
2010-10-26 10:36:41 +03:00
Lasse Collin 7c427ec38d Bump version 5.1.0alpha. 2010-10-25 12:59:25 +03:00
Lasse Collin b667a3ef63 Bump version to 5.0.0 and liblzma version-info to 5:0:0. 2010-10-23 14:02:53 +03:00
Lasse Collin 8c947e9291 liblzma: Make lzma_code() check the reserved members in lzma_stream.
If any of the reserved members in lzma_stream are non-zero
or non-NULL, LZMA_OPTIONS_ERROR is returned. It is possible
that a new feature in the future is indicated by just setting
a reserved member to some other value, so the old liblzma
version need to catch it as an unsupported feature.
2010-10-23 12:30:54 +03:00
Lasse Collin e61d85e082 Windows: Use MinGW's stdio functions.
The non-standard ones from msvcrt.dll appear to work
most of the time with XZ Utils, but there are some
corner cases where things may go very wrong. So it's
good to use the better replacements provided by
MinGW(-w64) runtime.
2010-10-23 12:26:33 +03:00
Lasse Collin 23e23f1dc0 liblzma: Use 512 as INDEX_GROUP_SIZE.
This lets compiler use shifting instead of 64-bit division.
2010-10-23 12:21:32 +03:00
Lasse Collin 613939fc82 liblzma: A few ABI tweaks to reserve space in structures. 2010-10-23 12:20:11 +03:00
Lasse Collin 68b83f252d xz: Make sure that message_strm() can never return NULL. 2010-10-21 23:16:11 +03:00
Lasse Collin d09c5753e3 liblzma: Update the comments in the API headers.
Adding support for LZMA_FINISH for Index encoding and
decoding needed tiny additions to the relevant .c files too.
2010-10-21 23:06:31 +03:00
Lasse Collin 0076e03641 Clean up a few FIXMEs and TODOs.
lzma_chunk_size() was commented out because it is
currently useless.
2010-10-19 11:44:37 +03:00
Lasse Collin f0fa880d24 xz: Avoid raise() also on OpenVMS.
This is similar to DOS/DJGPP that killing the program
with a signal will print a backtrace or a similar message.
2010-10-12 15:13:30 +03:00
Lasse Collin ac462b1c47 xz: Avoid SA_RESTART for portability reasons.
SA_RESTART is not as portable as I had hoped. It's missing
at least from OpenVMS, QNX, and DJGPP). Luckily we can do
fine without SA_RESTART.
2010-10-11 21:26:19 +03:00
Lasse Collin d52b411716 xz: Use "%"PRIu32 instead of "%d" in a format string. 2010-10-10 17:58:58 +03:00
Lasse Collin d492b80ddd lzmainfo: Use "%"PRIu32 instead of "%u" for uint32_t. 2010-10-10 16:49:01 +03:00
Lasse Collin 825e859a90 lzmainfo: Use fileno(stdin) instead of STDIN_FILENO. 2010-10-10 16:47:01 +03:00
Lasse Collin acbc4cdecb lzmainfo: Use setmode() on DOS-like systems. 2010-10-09 23:20:51 +03:00
Lasse Collin ef364d3abc OS/2 and DOS: Be less verbose on signals.
Calling raise() to kill xz when user has pressed C-c
is a bit verbose on OS/2 and DOS/DJGPP. Instead of
calling raise(), set only the exit status to 1.
2010-10-09 21:51:03 +03:00
Lasse Collin efeb998a2b lzmainfo: Add Windows resource file. 2010-10-09 13:02:15 +03:00
Lasse Collin 389d418445 Add missing public domain notice to lzmadec_w32res.rc. 2010-10-09 12:57:25 +03:00
Lasse Collin 6389c773a4 Windows: Update common_w32res.rc. 2010-10-09 12:52:12 +03:00
Lasse Collin d3cd7abe85 Use LZMA_VERSION_STRING instead of PACKAGE_VERSION.
Those are the same thing, and the former makes it a bit
easier to build the code with other build systems, because
one doesn't need to update the version number into custom
config.h.

This change affects only lzmainfo. Other tools were already
using LZMA_VERSION_STRING.
2010-10-08 16:53:20 +03:00
Lasse Collin b1c7368f95 Build: Add options to disable individual command line tools. 2010-10-08 15:25:45 +03:00
Lasse Collin f9907503f8 Build: Remove the static/dynamic tricks.
Most distros want xz linked against shared liblzma, so
it doesn't help much to require --enable-dynamic for that.
Those who want to avoid PIC on x86-32 to get better
performance, can still do it e.g. by using --disable-shared
to compile xz and then another pass to compile shared liblzma.

Part of these static/dynamic tricks were needed for Windows
in the past. Nowadays we rely on GCC and binutils to do the
right thing with auto-import. If the Autotooled build system
needs to support some other toolchain on Windows in the future,
this may need some rethinking.
2010-10-05 14:13:16 +03:00
Lasse Collin 80b5675fa6 A few more languages files to the xz man page.
Thanks to Jonathan Nieder.
2010-10-04 19:43:01 +03:00
Lasse Collin 61ae593661 liblzma: Small fixes to comments in the API headers. 2010-10-02 11:38:20 +03:00
Lasse Collin 31575a449a Fix accomodate -> accommodate on the xz man page. 2010-09-28 01:17:14 +03:00
Lasse Collin cec0ddc8ec Major man page updates.
Lots of content was updated on the xz man page.

Technical improvements:
  - Start a new sentence on a new line.
  - Use fairly short lines.
  - Use constant-width font for examples (where supported).
  - Some minor cleanups.

Thanks to Jonathan Nieder for some language fixes.
2010-09-27 23:29:34 +03:00
Lasse Collin 075257ab04 Fix the preset -3e.
depth=0 was missing.
2010-09-26 18:10:31 +03:00
Lasse Collin 2108801855 xz: Edit a translators comment. 2010-09-15 00:34:13 +03:00
Lasse Collin a8760203f9 xz: Add a comment to translators about "literal context bits". 2010-09-10 14:09:33 +03:00
Lasse Collin bb0b1004f8 xz: Multiple fixes.
The code assumed that printing numbers with thousand separators
and decimal points would always produce only US-ASCII characters.
This was used for buffer sizes (with snprintf(), no overflows)
and aligning columns of the progress indicator and --list. That
assumption was wrong (e.g. LC_ALL=fi_FI.UTF-8 with glibc), so
multibyte character support was added in this commit. The old
way is used if the operating system doesn't have enough multibyte
support (e.g. lacks wcwidth()).

The sizes of buffers were increased to accomodate multibyte
characters. I don't know how big they should be exactly, but
they aren't used for anything critical, so it's not too bad.
If they still aren't big enough, I hopefully get a bug report.
snprintf() takes care of avoiding buffer overflows.

Some static buffers were replaced with buffers allocated on
stack. double_to_str() was removed. uint64_to_str() and
uint64_to_nicestr() now share the static buffer and test
for thousand separator support.

Integrity check names "None" and "Unknown-N" (2 <= N <= 15)
were marked to be translated. I had forgot these, plus they
wouldn't have worked correctly anyway before this commit,
because printing tables with multibyte strings didn't work.

Thanks to Marek Černocký for reporting the bug about
misaligned table columns in --list output.
2010-09-10 10:30:33 +03:00
Lasse Collin 41bc9956eb xz: Add a note to translators. 2010-09-07 12:31:40 +03:00
Lasse Collin 77a7746616 Fix use of N_() and ngettext().
I had somehow thought that N_() is usually used
as shorthand for ngettext().

This also fixes a missing \n from a call to ngettext().
2010-09-07 10:42:13 +03:00
Lasse Collin 58f5513182 xz: Improve a comment. 2010-09-06 10:16:24 +03:00
Lasse Collin bcb1b89834 xz: Update the comment about NetBSD in file_io.c.
Thanks to Joerg Sonnenberger.
2010-09-05 21:34:29 +03:00
Lasse Collin da014d5597 xz: Use an array instead of pointer for stdin_filename.
Thanks Joerg Sonnenberger.
2010-09-05 21:11:33 +03:00
Lasse Collin 8c7d3d1a07 xz: Hopefully ease translating the messages in list.c. 2010-09-05 12:16:17 +03:00
Lasse Collin ef840950ad xz: Fix grammar. 2010-09-04 23:14:44 +03:00
Lasse Collin c46afd6edc xz: Use lzma_lzma_preset() to initialize the options structure. 2010-09-04 23:12:20 +03:00
Lasse Collin 8fd3ac046d Don't set lc=4 with --extreme.
This should reduce the cases where --extreme makes
compression worse. On the other hand, some other
files may now benefit slightly less from --extreme.
2010-09-04 22:16:28 +03:00
Lasse Collin 474bac0c33 xz: Minor improvements to --help and --long-help. 2010-09-04 22:10:32 +03:00
Lasse Collin 2fce9312f3 xz: Make -vv show also decompressor memory usage. 2010-09-03 15:54:40 +03:00
Lasse Collin b4b1cbcb53 Tweak the compression presets -0 .. -5.
"Extreme" mode might need some further tweaking still.
Docs were not updated yet.
2010-09-03 15:13:12 +03:00
Lasse Collin 77fe5954cd liblzma: Adjust default depth calculation for HC3 and HC4.
It was 8 + nice_len / 4, now it is 4 + nice_len / 4.
This allows faster settings at lower nice_len values,
even though it seems that I won't use automatic depth
calcuation with HC3 and HC4 in the presets.
2010-09-03 12:28:41 +03:00
Lasse Collin fce69059cf xz: Make --help two lines shorter.
At least for now, the --help option doesn't list any
options that take arguments, so "Mandatory arguments to..."
can be omitted.
2010-09-03 11:11:25 +03:00
Lasse Collin a848e47ced xz: Make setting a preset override a custom filter chain.
This is more logical behavior than ignoring preset level
options once a custom filter chain has been specified.
2010-09-02 19:22:35 +03:00
Lasse Collin b3ff7ba044 xz: Always warn if adjusting dictionary size due to memlimit. 2010-09-02 19:09:57 +03:00
Lasse Collin 792331bdee Disable the memory usage limiter by default.
For several people, the limiter causes bigger problems that
it solves, so it is better to have it disabled by default.
Those who want to have a limiter by default need to enable
it via the environment variable XZ_DEFAULTS.

Support for environment variable XZ_DEFAULTS was added. It is
parsed before XZ_OPT and technically identical with it. The
intended uses differ quite a bit though; see the man page.

The memory usage limit can now be set separately for
compression and decompression using --memlimit-compress and
--memlimit-decompress. To set both at once, -M or --memlimit
can be used. --memory was retained as a legacy alias for
--memlimit for backwards compatibility.

The semantics of --info-memory were changed in backwards
incompatible way. Compatibility wasn't meaningful due to
changes in the memory usage limiter functionality.

The memory usage limiter info is no longer shown at the
bottom of xz --long -help.

The memory usage limiter support for removed completely from xzdec.

xz's man page was updated to match the above changes. Various
unrelated fixes were also made to the man page.
2010-08-07 20:45:18 +03:00
Lasse Collin 4a45dd4c39 Add missing const to a global constant in xz. 2010-08-06 20:22:16 +03:00
Lasse Collin 01aa4869cb Language fixes for man pages.
Thanks to A. Costa and Jonathan Nieder.
2010-07-28 11:44:55 +03:00
Lasse Collin c15c42abb3 Add --no-adjust. 2010-06-15 14:06:29 +03:00
Lasse Collin bc612d0e0c Clarify the description of the default memlimit in the man page.
Thanks to Denis Excoffier.
2010-06-11 21:48:32 +03:00
Lasse Collin e1b6935d60 Fix string to uint64_t conversion.
Thanks to Denis Excoffier for the bug report.
2010-06-11 21:43:28 +03:00
Lasse Collin d8b41eedce Fix compiling with -Werror. 2010-06-02 23:13:55 +03:00
Lasse Collin b5fbab6123 Silence a bogus Valgrind warning.
When using -O2 with GCC, it liked to swap two comparisons
in one "if" statement. It's otherwise fine except that
the latter part, which is seemingly never executed, got
executed (nothing wrong with that) and then triggered
warning in Valgrind about conditional jump depending on
uninitialized variable. A few people find this annoying
so do things a bit differently to avoid the warning.
2010-06-02 23:09:22 +03:00
Lasse Collin 29a7b250e6 Fix a Windows-specific FIXME in signal handling code. 2010-06-02 21:32:12 +03:00
Lasse Collin e89d987056 Adjust SA_RESTART workaround.
I want to get a bug report if something else than
DJGPP lacks SA_RESTART.
2010-06-02 17:46:58 +03:00
Lasse Collin e243145c84 xz man page updates.
- Concatenating .xz files and padding
- List mode
- Robot mode
- A few examples (but many more are needed)
2010-06-01 16:02:30 +03:00
Lasse Collin ce6dc3c0a8 Major update to xz --list. 2010-06-01 15:51:44 +03:00
Lasse Collin 905e54804a Rename message_filters_get() to message_filters_to_str(). 2010-06-01 14:13:03 +03:00
Lasse Collin 4b346ae8af Fix a comment. 2010-06-01 14:09:12 +03:00
Lasse Collin 07dc34f6da Fix lzma_block_compressed_size(). 2010-05-27 16:17:42 +03:00
Lasse Collin 44d70cb154 Take Cygwin into account in some #if lines.
This change is no-op, but good to have just in case
for the future.
2010-05-27 14:32:51 +03:00
Lasse Collin a334348dc0 Remove references to the Subblock filter in xz and tests.
Thanks to Jonathan Nieder.
2010-05-27 13:42:44 +03:00
Lasse Collin 70e5e2f6a7 Remove unused chunk_size.c.
Thanks to Jonathan Nieder for the reminder.
2010-05-27 13:35:36 +03:00
Jonathan Nieder 01a414eaf4 Use my_min() instead of MIN() in src/xz/list.c
This should have been done in
920a69a8d8.
2010-05-27 13:30:48 +03:00
Lasse Collin 920a69a8d8 Rename MIN() and MAX() to my_min() and my_max().
This should avoid some minor portability issues.
2010-05-26 10:36:46 +03:00
Lasse Collin 703d2c33c0 Better #error message. 2010-05-26 10:16:57 +03:00
Lasse Collin d8a55c48b3 Remove the Subblock filter code for now.
The spec isn't finished and the code didn't compile anymore.
It won't be included in XZ Utils 5.0.0. It's easy to get it
back once the spec is done.
2010-05-26 09:55:47 +03:00
Lasse Collin b6377fc990 Split message_filters().
message_filters_to_str() converts the filter chain to
a string. message_filters_show() replaces the original
message_filters().

uint32_to_optstr() was also added to show the dictionary
size in nicer format when possible.
2010-05-16 18:42:22 +03:00
Lasse Collin d9986db782 Omit lzma_restrict from the API headers.
It isn't really useful so omitting it makes things
shorter and slightly more readable.
2010-05-14 23:17:20 +03:00
Lasse Collin 6548e30465 Updates to tuklib_physmem and tuklib_cpucores.
Don't use #error to generate compile error, because some
compilers actually don't take it as an error. This fixes
tuklib_physmem on IRIX.

Fix incorrect error check for sysconf() return values.

Add AIX, HP-UX, and Tru64 specific code to detect the
amount RAM.

Add HP-UX specific code to detect the number of CPU cores.

Thanks a lot to Peter O'Gorman for initial patches,
testing, and debugging these fixes.
2010-05-10 19:54:15 +03:00
Lasse Collin a290cfee3e Show both elapsed time and estimated remaining time in xz -v.
The extra space for showing both has been taken from the
sizes field. If the sizes grow big, bigger units than MiB
will be used. It makes it slightly difficult to see that
progress is still happening with huge files, but it should
be OK in practice.

Thanks to Trent W. Buck for <http://bugs.debian.org/574583>
and Jonathan Nieder for suggestions how to fix it.
2010-04-12 21:55:56 +03:00
Lasse Collin f4b2b52624 Fix xzgrep to not break if filenames have spaces or quotes.
Thanks to someone who reported the bug on IRC.
2010-03-07 19:52:25 +02:00
Lasse Collin cf38da00a1 Treat all integer multiplier suffixes as base-2.
Originally both base-2 and base-10 were supported, but since
there seems to be little need for base-10 in XZ Utils, treat
everything as base-2 and also be more relaxed about the case
of the first letter of the suffix. Now xz will accept e.g.
KiB, Ki, k, K, kB, and KB, and interpret them all as 1024. The
recommended spelling of the suffixes are still KiB, MiB, and GiB.
2010-03-07 13:59:32 +02:00
Lasse Collin 00fc1211ae Consistently round up the memory usage limit in messages.
It still feels a bit wrong to round 1 byte to 1 MiB but
at least it is now done consistently so that the same
byte value is always rounded the same way to MiB.
2010-03-07 13:50:23 +02:00
Lasse Collin 2672bcc9f8 Increase the default memory usage limit on "low-memory" systems.
Previously the default limit was always 40 % of RAM. The
new limit is a little bit more complex:

  - If 40 % of RAM is at least 80 MiB, 40 % of RAM is used
    as the limit.

  - If 80 % of RAM is over 80 MiB, 80 MiB is used as the limit.

  - Otherwise 80 % of RAM is used as the limit.

This should make it possible to decompress files created with
"xz -9" on more systems. Swapping is generally more expected
on systems with less RAM, so higher default limit on them
shouldn't cause too bad surprises in terms of heavy swapping.
Instead, the higher default limit should reduce the number of
bad surprises when it used to prevent decompression of files
created with "xz -9". The DoS prevention system shouldn't be
a DoS itself.

Note that even with the new default limit, a system with 64 MiB
RAM cannot decompress files created with "xz -9" without user
overriding the limit. This should be OK, because if xz is going
to need more memory than the system has RAM, it will run very
very slowly and thus it's good that user has to override the limit
in that case.
2010-03-07 13:29:28 +02:00
Lasse Collin d0d1c51aea Fix missing initialization in lzma_strm_init().
With bad luck, lzma_code() could return LZMA_BUF_ERROR
when it shouldn't.

This has been here since the early days of liblzma.
It got triggered by the modifications made to the xz
tool in commit 18c10c30d2
but only when decompressing .lzma files. Somehow I managed
to miss testing that with Valgrind earlier.

This fixes <http://bugs.gentoo.org/show_bug.cgi?id=305591>.
Thanks to Rafał Mużyło for helping to debug it on IRC.
2010-03-06 21:17:20 +02:00
Lasse Collin eb7d51a3fa Collection of language fixes to comments and docs.
Thanks to Jonathan Nieder.
2010-02-12 13:16:15 +02:00
Lasse Collin 4785f2021a Fix jl -> jb in ASM files. 2010-02-12 12:41:20 +02:00
Lasse Collin 6b50c9429b Use __APPLE__ instead of __MACH__ in ASM files.
This allows the files to work on HURD.

Thanks to Jonathan Nieder.
2010-02-12 12:31:22 +02:00
Lasse Collin 6503fde658 Subtle change to liblzma Block handling API.
lzma_block.version has to be initialized even for
lzma_block_header_decode(). This way a future version
of liblzma won't allocate memory in a way that an old
application doesn't know how to free it.

The subtlety of this change is that all current apps
using lzma_block_header_decode() will keep working for
now, because the only possible version value is zero,
and lzma_block_header_decode() unconditionally sets the
version to zero even now. Unless fixed, these apps will
break in the future if a new version of the Block options
is ever needed.
2010-02-07 19:48:06 +02:00
Lasse Collin dd7c3841ff Fix wrong assertion.
This was added in 455e68c030.
2010-02-02 11:50:11 +02:00
Lasse Collin fef6333f52 Fix typos in comments. 2010-02-01 22:47:54 +02:00
Lasse Collin 455e68c030 Fix signal handling for --list. 2010-02-01 22:46:56 +02:00
Lasse Collin 82220a1490 Fix compression of symlinks with --force.
xz --force accepted symlinks, but didn't remove
them after successful compression. Instead, an error
message was displayed.
2010-02-01 11:44:45 +02:00
Lasse Collin 34eb5e201d Select the default integrity check type at runtime.
Previously it was set statically to CRC64 or CRC32
depending on options passed to the configure script.
2010-01-31 19:52:38 +02:00
Lasse Collin 96a4f840e3 Improve displaying of the memory usage limit. 2010-01-31 18:17:50 +02:00
Lasse Collin b3cc4d8edd Don't use uninitialized sigset_t.
If signal handlers haven't been established, then it's
useless to try to block them, especially since the sigset_t
used for blocking hasn't been initialized yet.
2010-01-31 12:53:56 +02:00
Lasse Collin 231c3c7098 Delay opening the destionation file and other fixes.
The opening of the destination file is now delayed a little.
The coder is initialized, and if decompressing, the memory
usage of the first Block compared against the memory
usage limit before the destination file is opened. This
means that if --force was used, the old "target" file won't
be deleted so easily when something goes wrong very early.
Thanks to Mark K for the bug report.

The above fix required some changes to progress message
handling. Now there is a separate function for setting and
printing the filename. It is used also in list.c.

list_file() now handles stdin correctly (gives an error).

A useless check for user_abort was removed from file_io.c.
2010-01-31 12:01:54 +02:00
Lasse Collin 0dbd0641db Add list.h to src/xz/Makefile.am.
This should have been already in
0bc9eab243.
2010-01-29 22:48:04 +02:00
Lasse Collin 5574d64e03 Silence two compiler warnings on DOS-like systems. 2010-01-27 16:42:11 +02:00
Lasse Collin b063cc34a3 Use PACKAGE_URL instead of custom PACKAGE_HOMEPAGE. 2010-01-27 13:31:03 +02:00
Lasse Collin 38b8035b5c Add a missing space to an error message.
Thanks to Robert Readman.
2010-01-26 23:37:46 +02:00
Lasse Collin e5496f9628 Use past tense in error message in io_unlink().
Added a note to translators too.

Thanks to Robert Readman.
2010-01-26 22:53:37 +02:00
Lasse Collin d9a9800597 Fix too small static buffer in util.c.
This was introduced in
0dd6d00766 two days ago.
2010-01-26 15:42:24 +02:00
Lasse Collin d0b4bbf5da Minor comment fix. 2010-01-26 14:46:43 +02:00
Lasse Collin 0bc9eab243 Add initial version of xz --list.
This is a bit rough but should be useful for basic things.
Ideas (with detailed examples) about the output format are
welcome.

The output of --robot --list is not necessarily stable yet,
although I don't currently have any plans about changing it.

The man page hasn't been updated yet.
2010-01-24 23:50:54 +02:00
Lasse Collin df254ce03b Add io_pread().
It will be used by --list.
2010-01-24 22:46:11 +02:00
Lasse Collin ef68dd4a92 Set LC_NUMERIC=C when --robot is used.
It is to ensure that floating point numbers
will always have a dot as the decimal separator.
2010-01-24 22:45:14 +02:00
Lasse Collin 0dd6d00766 Some improvements to printing sizes in xz. 2010-01-24 16:57:40 +02:00
Lasse Collin 37f31ead9d Update the xz man page to match the previous two commits. 2010-01-15 11:05:11 +02:00
Lasse Collin 3ffd5d81a4 Don't read compressed data from a terminal or write it
to a terminal even if --force is specified.

It just seems more reasonable this way.

The new behavior matches bzip2. The old one matched gzip.
2010-01-13 19:10:25 +02:00
Lasse Collin 23ac2c44c3 Don't compress or decompress special files unless writing
to stdout even if --force is used.

--force will still enable compression of symlinks, but only
in case they point to a regular file.

The new way simply seems more reasonable. It matches gzip's
behavior while the old one matched bzip2's behavior.
2010-01-13 18:12:40 +02:00
Lasse Collin 153c7740c5 Add IRIX-specific code to tuklib_physmem and tuklib_cpucores.
This is untested but it will get tested soon and, if needed,
fixed before 5.0.0.

Thanks to Stuart Shelton.
2010-01-12 16:18:14 +02:00
Lasse Collin 8ea8dc754a Fix _memconfig() functions.
This affects lzma_memusage() and lzma_memlimit_get().
2010-01-01 00:29:10 +02:00
Lasse Collin 1a7ec87c8e Revised the Index handling code.
This breaks API and ABI but most apps are not affected
since most apps don't use this part of the API. You will
get a compile error if you are using anything that got
broken.

Summary of changes:

  - Ability to store Stream Flags, which are needed
    for random-access reading in multi-Stream files.

  - Separate function to set size of Stream Padding.

  - Iterator structure makes it possible to read the same
    lzma_index from multiple threads at the same time.

  - A lot faster code to locate Blocks.

  - Removed lzma_index_equal() without adding anything
    to replace it. I don't know what it should do exactly
    with the new features and what actually needs this
    function in the first place other than test_index.c,
    which now has its own code to compare lzma_indexes.
2009-12-31 22:45:53 +02:00
Lasse Collin 097bad0003 Add missing lzma_nothrow in filter.h. 2009-12-31 21:11:05 +02:00
Lasse Collin b56cb1fc31 Remove redefinition of _(msgid) macro from lzmainfo.c. 2009-12-09 18:13:44 +02:00
Lasse Collin f7e44c6c11 Always rely on GCC's auto-import on Windows.
I understood that this is nicer, because then people
don't need to worry about the LZMA_API_STATIC macro.

Thanks to Charles Wilson and Keith Marshall.
2009-12-09 00:38:55 +02:00
Lasse Collin 7b76a3e233 Fix file_io.c on DOS-like systems.
The problem was introduced when adding sparse file
support in 465d1b0d65.

Thanks to Charles Wilson.
2009-12-07 21:46:53 +02:00
Lasse Collin 5e817a50d2 Add a note for translators to add a bug reporting address
for translation bugs.
2009-12-07 20:32:08 +02:00
Lasse Collin 6db1c35be9 Prevent xgettext from taking one regular string as a C format string.
Thanks to Marek Černocký.
2009-12-07 20:07:02 +02:00
Lasse Collin e0c2776b6f Remove duplicate code in io_open_dest().
Fix a missing _() in the error message too.
2009-11-28 17:45:22 +02:00
Lasse Collin f057a33c6f Typo fix to sysdefs.h.
Thanks to Jonathan Nieder.
2009-11-26 10:11:23 +02:00
Lasse Collin 919fbaff86 Add missing error check to coder.c.
With bad luck this could cause a segfault due to
reading (but not writing) past the end of the buffer.
2009-11-25 14:22:19 +02:00
Lasse Collin bd13b04e20 Fix bugs in lzma_index_read() and lzma_index_cat().
lzma_index_read() didn't skip over Stream Padding
if it was the first record in the Index.

lzma_index_cat() didn't combine small Indexes correctly.

The test suite was updated to check for these bugs.

These bugs didn't affect the xz command line tool or
most users of liblzma in any way.
2009-11-25 13:04:10 +02:00
Lasse Collin 1f19690914 Index decoder fixes.
The Index decoder code didn't perfectly match the API docs,
which said that *i will be set to point to the decoded Index
only after decoding has succeeded. The docs were a bit unclear
too.

Now the decoder will initially set *i to NULL. *i will be set
to point to the decoded Index once decoding has succeeded.
This simplifies applications too, since it avoids dangling
pointers.
2009-11-25 12:52:56 +02:00
Lasse Collin 465d1b0d65 Create sparse files by default when decompressing into
a regular file.

Sparse file creation can be disabled with --no-sparse.
I don't promise yet that the name of this option won't
change before 5.0.0. It's possible that the code, that
checks when it is safe to use sparse output on stdout,
is not good enough, and a more flexible command line
option is needed to configure sparse file handling.
2009-11-25 11:19:20 +02:00
Lasse Collin f1a28b96c9 Add missing consts to pointer casts. 2009-11-22 12:05:33 +02:00
Lasse Collin 0733f4c999 Make fastpos.h use tuklib_integer.h instead of bsr.h
when --enable-small has been specified.
2009-11-22 11:55:03 +02:00
Lasse Collin 7ac3985d89 Update tuklib_integer.h with bit scan functions.
Thanks to Joachim Henke for the original patch.
2009-11-22 11:52:30 +02:00
Lasse Collin d315ca4930 Add support for --info-memory and --robot to xz.
Currently --robot works only with --info-memory and
--version. --help and --long-help work too, but --robot
has no effect on them.

Thanks to Jonathan Nieder for the original patches.
2009-11-16 18:16:45 +02:00
Lasse Collin e330fb7e6b Fix wrong indentation caused by incorrect settings
in the text editor.
2009-11-15 12:54:45 +02:00
Lasse Collin 93e418562c Add lzma_physmem().
I had hoped to keep liblzma as purely a compression
library as possible (e.g. file I/O will go into
a different library), but it seems that applications
linking agaisnt liblzma need some way to determine
the memory usage limit, and knowing the amount of RAM
is one reasonable way to help making such decisions.

Thanks to Jonathan Nieder for the original patch.
2009-11-15 12:40:17 +02:00
Lasse Collin 2ddcae247c Some updates to xz man page. 2009-11-14 20:20:03 +02:00
Lasse Collin 19b2674f07 Fix description of --memory in --long-help. 2009-11-14 19:51:03 +02:00
Lasse Collin 418d64a32e Fix a design error in liblzma API.
Originally the idea was that using LZMA_FULL_FLUSH
with Stream encoder would read the filter chain
from the same array that was used to intialize the
Stream encoder. Since most apps wouldn't use
LZMA_FULL_FLUSH, most apps wouldn't need to keep
the filter chain available after initializing the
Stream encoder. However, due to my mistake, it
actually required keeping the array always available.

Since setting the new filter chain via the array
used at initialization time is not a nice way to do
it for a couple of reasons, this commit ditches it
and introduces lzma_filters_update(). This new function
replaces also the "persistent" flag used by LZMA2
(and to-be-designed Subblock filter), which was also
an ugly thing to do.

Thanks to Alexey Tourbin for reminding me about the problem
that Stream encoder used to require keeping the filter
chain allocated.
2009-11-14 18:59:19 +02:00
Lasse Collin f0bf7634b7 Fix wrong function name in the previous commit.
It was meant to be lzma_filters_copy(), not lzma_filters_dup().
2009-10-17 11:11:58 +03:00
Lasse Collin 6d118a0b9d Add lzma_filters_copy().
This will be needed internally by liblzma once I fix
a design mistake in the encoder API. This function may
be useful to applications too so it's good to export it.
2009-10-17 01:47:07 +03:00
Jonathan Nieder 78e92c1847 Escape dashes in xzmore.1
A minus sign is larger, easier to see in a printout, and more
likely to use the same glyph as ASCII hyphen-minus in a terminal
than a hyphen.  Since broken manual pagers do not find hyphens
when the user searches for a hyphen-minus, minus signs are also
easier to search for.  So use minus signs instead of hyphens to
render sample terminal output.
2009-10-16 20:39:24 +03:00
Lasse Collin 7b7fe902d9 Mention --check=none in --long-help. It was already in
the man page though.

Thanks to Jim Meyering for noticing this.
2009-10-16 20:35:39 +03:00
Lasse Collin ebfb2c5e1f Use a tuklib module for integer handling.
This replaces bswap.h and integer.h.

The tuklib module uses <byteswap.h> on GNU,
<sys/endian.h> on *BSDs and <sys/byteorder.h>
on Solaris, which may contain optimized code
like inline assembly.
2009-10-04 22:57:12 +03:00
Lasse Collin 29fd321033 Add support for --enable-assume-ram=SIZE. 2009-10-02 14:35:56 +03:00
Lasse Collin 3782b3fee4 Use unaligned access (if possible) on both endiannesses
in lz_encoder_hash.h.
2009-10-02 11:28:17 +03:00
Lasse Collin c5f68b5cc7 Make liblzma produce the same output on both endiannesses.
Seems that it is a problem in some cases if the same
version of XZ Utils produces different output on different
endiannesses, so this commit fixes that problem. The output
will still vary between different XZ Utils versions, but I
cannot avoid that for now.

This commit bloatens the code on big endian systems by 1 KiB,
which should be OK since liblzma is bloated already. ;-)
2009-10-02 11:03:26 +03:00
Lasse Collin db9119b918 Work around a bug in Interix header files.
Thanks to Markus Duft for the patch.
2009-09-27 11:48:54 +03:00
Lasse Collin b3d105e697 Fix an error in OpenVMS-specific code.
Thanks to Jouk Jansen.
2009-09-24 17:50:17 +03:00
Lasse Collin 932b2e2044 Better fixes for OpenVMS support.
Thanks to Jouk Jansen.
2009-09-22 14:03:02 +03:00
Lasse Collin 4c3630ec41 Avoid non-standard preprocessor construct.
Thanks to Jouk Jansen.
2009-09-22 13:40:19 +03:00
Lasse Collin 0deb1bb60a Make sure that TUKLIB_DOSLIKE doesn't get defined on Cygwin.
Thanks to Charles Wilson.
2009-09-21 19:50:09 +03:00
Lasse Collin e599bba421 Various changes.
Separate a few reusable components from XZ Utils specific
code. The reusable code is now in "tuklib" modules. A few
more could be separated still, e.g. bswap.h.

Fix some bugs in lzmainfo.

Fix physmem and cpucores code on OS/2. Thanks to Elbert Pol
for help.

Add OpenVMS support into physmem. Add a few #ifdefs to ease
building XZ Utils on OpenVMS. Thanks to Jouk Jansen for the
original patch.
2009-09-19 09:47:30 +03:00
Lasse Collin 49cfc8d392 Fix incorrect use of "restrict". 2009-09-15 21:07:23 +03:00
Lasse Collin 15ffd675ab Fix GCC version check for nothrow attribute. 2009-09-12 14:09:17 +03:00
Lasse Collin 4ab7b16b95 A few grammar fixes.
Thanks to Christian Weisgerber for pointing out some of these.
2009-09-12 14:07:36 +03:00
Lasse Collin 221be761f4 Use $(LN_EXEEXT) in symlinks to executables.
This fixes "make install" on operating systems using
a suffix for executables.

Cygwin is treated specially. The symlink names won't have
.exe suffix even though the executables themselves have.
Thanks to Charles Wilson.
2009-09-11 10:24:09 +03:00
Lasse Collin 18a4233a53 Fix a couple of warnings. 2009-09-11 09:25:09 +03:00
Lasse Collin 429910b2ba Add OS/2-specific code to physmem.h.
Also move DJGPP-specific code near the code meant
for other DOS-like systems.
2009-09-05 18:39:21 +03:00
Lasse Collin 60ccb80c9c Use sysctl() != -1 instead of !sysctl() to check if
the function call succeeded.

NetBSD 4.0 returns positive values on success, but
NetBSD Current and FreeBSD return zero. OpenBSD's
man page doesn't tell what sysctl() returns on
success. All these BSDs return -1 on error.

Thanks to Robert Elz and Thomas Klausner.
2009-09-05 01:20:29 +03:00
Lasse Collin 319a0fd7d7 Refactored option parsing. 2009-09-01 20:40:01 +03:00
Lasse Collin 25adaaa56e Fix options parsing bug in xz.
xz used to reject "xz --lzma2=pb=2," while
"xz --lzma2=pb=2,," worked. Now both work.
2009-09-01 20:23:30 +03:00
Lasse Collin 655457b9ad Revert 43f44160b1
and use a fix that works on all systems using
GNU assembler.

Maybe the assembler code is used e.g. on Solaris x86
but let's worry about it if this doesn't work on it.
2009-08-31 21:59:25 +03:00
Lasse Collin 94c66b3297 Use even more hackish way to support thousand separators.
Seems that in addition on Windows and DOS, also OpenBSD
lacks support for %'d style printf() format strings.
So far that is the only modern POSIX-like system I know
with this problem, but after this hack, the thousand
separator shouldn't be a problem on any system.

Maybe testing if a format string like %'d produces
reasonable output is invoking undefined behavior on some
systems, but so far all the problematic systems I've tried
just print the raw format string (e.g. %'d prints 'd).

Maybe Autoconf test would have been better, but this
hack works also for cross-compilation, and avoids
recompilation in case the system libc starts to support
the thousand separator.
2009-08-29 14:43:52 +03:00
Lasse Collin 27414daadf Fix sysctl() usage.
This fixes build on *BSDs and Darwin.

Thanks to Jukka Salmi for the patches.
Richard Koch reported the problem too.
2009-08-29 13:39:21 +03:00
Lasse Collin 43f44160b1 Fix x86 assembler on GCC 3.
Thanks to Karl Berry.
2009-08-29 13:35:23 +03:00
Lasse Collin c8c184db1c Update xz man page date. 2009-08-27 17:08:33 +03:00
Lasse Collin 04dcbfdeb9 Bumped version to 4.999.9beta. 2009-08-27 16:21:22 +03:00
Lasse Collin 2341437719 Some xz man page improvements. 2009-08-27 15:17:00 +03:00
Lasse Collin 3e2ba8b585 Updates to liblzma API headers.
Added lzma_nothrow for every function. It adds
throw() when the header is used in C++ code.

Some lzma_attrs were added or removed.

Lots of comments were improved.
2009-08-27 10:13:46 +03:00
Lasse Collin fe111a25cd Some xz man changes. 2009-08-17 22:45:50 +03:00
Lasse Collin 3ce1916c83 Fix data corruption in LZ/LZMA2 encoder.
Thanks to Jonathan Stott for the bug report.
2009-08-16 22:15:13 +03:00
Lasse Collin 8238c4b240 Link lzmainfo against shared liblzma by default. 2009-08-13 15:03:46 +03:00
Lasse Collin 5aa4678b23 Fix xz Makefile.am for the man page.
install-exec-hook -> install-data-hook
2009-08-13 12:56:47 +03:00
Lasse Collin e51b4e49e8 Add lzmainfo for backward compatibility with LZMA Utils.
lzmainfo now links against static liblzma. In contrast
to other command line tools in XZ Utils, linking lzmainfo
against static liblzma by default is dumb. This will be
fixed once I have fixed some related issues in configure.ac.
2009-08-13 12:55:45 +03:00
Lasse Collin a4165d0584 Sync some error messages from xz to xzdec.
Make xz error message translation usable outside
xz (at least in upcoming lzmainfo).
2009-08-13 12:42:36 +03:00
Lasse Collin 180bdf58ea Fix first line of xz man page. 2009-08-13 09:37:01 +03:00
Lasse Collin e1ce2291e7 Added a rough version of the xz man page. 2009-08-10 11:22:31 +03:00
Jonathan Nieder e71903fc61 “xzdiff a.xz b.xz” always fails
Attempts to compare two compressed files result in no output and
exit status 2.

Instead of going to standard output, ‘diff’ output is being
captured in the xz_status variable along with the exit status from
the decompression commands.  Later, when this variable is examined
for nonzero status codes, numerals from dates in the ‘diff’ output
make it appear as though decompression failed.

So let the ‘diff’ output leak to standard output with another file
descriptor.  (This trick is used in all similar contexts elsewhere
in xzdiff and in the analogous context in gzip’s zdiff script.)
2009-08-09 22:55:19 +03:00
Jonathan Nieder 1d314b81aa xzless: Support compressed standard input
It can be somewhat confusing that

	less < some_file.txt

works fine, whereas

	xzless < some_file.txt.xz

does not.  Since version 429, ‘less’ allows a filter specified in
the LESSOPEN environment variable to preprocess its input even if
it comes from standard input, if $LESSOPEN begins with ‘|-’.  So
set $LESSOPEN to take advantage of this feature.

Check less’s version at runtime so xzless can continue to work
with older versions.
2009-08-09 22:27:22 +03:00
Jonathan Nieder dbbd8fb870 xzdiff: add missing ;; to case statement 2009-07-30 12:23:45 +03:00
Lasse Collin 0db1befcfb Fix incorrect usage of getopt_long(), which caused
invalid memory access if XZ_OPT was defined.
2009-07-23 19:10:55 +03:00
Lasse Collin 8f8ec942d6 Avoid internal error with --format=xz --lzma1. 2009-07-20 15:43:32 +03:00
Lasse Collin ef4cf1851d Added missing author notice to xzless.in. 2009-07-19 11:09:31 +03:00
Lasse Collin 64e498c89d Added public domain notice into a few files. 2009-07-18 11:26:39 +03:00
Lasse Collin a35755c5de Allow extra commas in filter-specific options on xz command line.
This may slightly ease writing scripts that construct
filter-specific option strings dynamically.
2009-07-14 21:10:36 +03:00
Lasse Collin 98f3cac1ad Accept --lzma2=preset=6e where "e" is equivalent to --extreme
when no custom chain is in use.
2009-07-14 18:04:31 +03:00
Lasse Collin cd69a5a6c1 BCJ filters: Reject invalid start offsets with LZMA_OPTIONS_ERROR.
This is a quick and slightly dirty fix to make the code
conform to the latest file format specification. Without
this patch, it's possible to make corrupt files by
specifying start offset that is not a multiple of the
filter's alignment. Custom start offset is almost never
used, so this was only a minor bug.

The xz command line tool doesn't validate the start offset,
so one will get a bit unclear error message if trying to use
an invalid start offset.
2009-07-10 11:39:38 +03:00
Lasse Collin eed9953732 Look for full command names instead of substrings
like "un", "cat", and "lz" when determining if
xz is run as unxz, xzcat, lzma, unlzma, or lzcat.

This is to ensure that if xz is renamed (e.g. via
--program-transform-name), it doesn't so easily
work in wrong mode.
2009-07-10 11:33:21 +03:00
Lasse Collin 3bdb53792c Remove --force from xzdec.
It was ignored for compatibility with xz, but now that
--decompress --stdout --force copies unrecognized files
as is to stdout, simply ignoring --force in xzdec would
be wrong. xzdec will not support copying unrecognized
data as is to stdout, so it cannot support --force.
2009-07-08 22:50:16 +03:00
Lasse Collin 5f16ef4abf Use sed instead of $(SED) so that we don't need to
use AC_PROG_SED. We don't do anything fancy with sed,
so this should work OK. libtool 2.2 sets SED but 1.5
doesn't, so $(SED) happened to work when using libtool 2.2.
2009-07-06 10:36:04 +03:00
Lasse Collin 96e4b257e1 Major update to the xzgrep and other scripts based on
the latest versions found from gzip CVS repository.

configure will try to find a POSIX shell to be used by
the scripts. This should ease portability on systems
which have pre-POSIX /bin/sh.

xzgrep and xzdiff support .xz, .lzma, .gz, and .bz2 files.
xzmore and xzless support only .xz and .lzma files.

The name of the xz executable used in these scripts is
now correct even if --program-transform-name has been used.
2009-07-05 22:25:17 +03:00
Lasse Collin 25cc7a6e8c Use @PACKAGE_HOMEPAGE@ in liblzma.pc.in. 2009-07-05 19:26:53 +03:00
Lasse Collin 18c10c30d2 Make "xz --decompress --stdout --force" copy unrecognized
files as is to standard output.

This feature is needed to be more compatible with gzip's
behavior. This was more complicated to implement than it
sounds, because the way liblzma is able to return errors with
files of only a few bytes in size. xz now has its own file
type detection code and no longer uses lzma_auto_decoder().
2009-07-04 00:40:44 +03:00
Lasse Collin 0a289c01ac Define PACKAGE_HOMEPAGE in configure.ac and use it in
xz and xzdec.

Use also PACKAGE_NAME instead of hardcoding "XZ Utils".
2009-07-02 14:30:38 +03:00
Lasse Collin f42ee98166 Build system fixes
Don't use libtool convenience libraries to avoid recently
discovered long-standing subtle but somewhat severe bugs
in libtool (at least 1.5.22 and 2.2.6 are affected). It
was found when porting XZ Utils to Windows
<http://lists.gnu.org/archive/html/libtool/2009-06/msg00070.html>
but the problem is significant also e.g. on GNU/Linux.

Unless --disable-shared is passed to configure, static
library built from a set of convenience libraries will
contain PIC objects. That is, while libtool builds non-PIC
objects too, only PIC objects will be used from the
convenience libraries. On 32-bit x86 (tested on mobile XP2400+),
using PIC instead of non-PIC makes the decompressor 10 % slower
with the default CFLAGS.

So while xz was linked against static liblzma by default,
it got the slower PIC objects unless --disable-shared was
used. I tend develop and benchmark with --disable-shared
due to faster build time, so I hadn't noticed the problem
in benchmarks earlier.

This commit also adds support for building Windows resources
into liblzma and executables.
2009-06-30 17:09:57 +03:00
Lasse Collin 6e685aae45 Add -no-undefined to get shared liblzma on Windows. 2009-06-28 10:04:24 +03:00
Lasse Collin 73f560ee5f Make physmem() work on Cygwin 1.5 and older. 2009-06-27 22:57:15 +03:00
Lasse Collin 7ff0004fbc Moved the Windows resource files outside the windows directory
to prepare for building them with Autotools.
2009-06-27 17:28:01 +03:00
Lasse Collin 449c634674 Added missing $(EXEEXT). 2009-06-27 13:05:03 +03:00
Lasse Collin 792db79f27 Create correct symlinks even when
--program-{prefix,suffix,transform} is passed to configure.
2009-06-27 12:32:40 +03:00
Lasse Collin 0adc72feb8 Silence a compiler warning on DOS-like systems. 2009-06-27 10:02:24 +03:00
Lasse Collin b2b1f86753 Hopefully improved portability of the assembler code in
Autotools based builds on Windows.
2009-06-27 00:43:06 +03:00
Lasse Collin da0af22e4b Updated comments to match renamed files. 2009-06-26 21:00:35 +03:00
Lasse Collin 65014fd211 Rename process.[hc] to coder.[hc] and io.[hc] to file_io.[hc]
to avoid problems on systems with system headers with those
names.
2009-06-26 20:49:54 +03:00
Lasse Collin 5e1257466d Rename process_file() to coder_run(). 2009-06-26 20:43:36 +03:00
Lasse Collin cad62551c5 Ugly hack to make it possible to use the thousand separator
format character with snprintf() on POSIX systems but not
on non-POSIX systems and still keep xgettext working.
2009-06-26 20:36:45 +03:00
Lasse Collin 390a640856 Basic support for building with Cygwin and MinGW using
the Autotools based build system. It's not good yet, more
fixes will follow.
2009-06-26 15:37:53 +03:00
Lasse Collin 1c9360b7d1 Fix @variables@ to $(variables) in Makefile.am files.
Fix the ordering of libgnu.a and LTLIBINTL on the linker
command line and added missing LTLIBINTL to tests/Makefile.am.
2009-06-26 14:47:31 +03:00
Lasse Collin b317b218e2 Support HW_PHYSMEM64 2009-06-24 20:14:10 +03:00
Lasse Collin ae82dde5d9 Cast a char argument to isspace() to unsigned char. 2009-06-24 13:01:59 +03:00
Lasse Collin 8ed156ce89 Added xzdec man page. 2009-06-04 23:42:12 +03:00
Lasse Collin f6df39afaa Harmonized xzdec --memory with xz --memory and made
minor cleanups.
2009-06-04 23:26:47 +03:00
Lasse Collin 1774f27c61 Fix purporse -> purpose. Thanks to Andrew Dudman.
Released .xz spec 1.0.2 due to this fix too.
2009-06-04 22:59:55 +03:00
Lasse Collin 083c23c680 Make the raw value of the Check field available to applications
via lzma_block structure.

This changes ABI but not doesn't break API.
2009-05-26 14:48:48 +03:00
Lasse Collin b4f5c81409 Remove undocumented alternative option names --bcj, --ppc,
and --itanium.
2009-05-23 16:57:21 +03:00
Lasse Collin b1edee2cdc Add support for specifying the BCJ filter start offset
in the xz command line tool.
2009-05-23 15:12:23 +03:00
Lasse Collin dcedb6998c Added support for --quiet and --no-warn to xzdec.
Cleaned up the --help message a little.
2009-05-22 16:40:50 +03:00
Lasse Collin 5f735dae80 Use the 40 % of RAM memory usage limit in xzdec too.
Update the memory usage info text in --help to match
the text in xz --long-help.
2009-05-22 15:11:52 +03:00
Lasse Collin b60376249e Add --no-warn. 2009-05-22 14:43:00 +03:00
Lasse Collin b4f92f522d Fix a comment. 2009-05-22 14:27:40 +03:00
Lasse Collin 4dd21d23f2 Remove the --info option, which was an alias for --list. 2009-05-22 14:21:20 +03:00
Lasse Collin 8836139b63 If xz is run as lzma, unlzma, or lzcat, simply imply
--format=lzma. This means that xz emulating lzma
doesn't decompress .xz files, while before this
commit it did. The new way is slightly simpler in
code and especially in upcoming documentation.
2009-05-22 12:27:43 +03:00
Lasse Collin b0063023f8 Make the default memory usage limit 40 % of RAM for both
compressing and decompressing. This should be OK now that
xz automatically scales down the compression settings if
they would exceed the memory usage limit (earlier, the limit
for compression was increased to 90 % because low limit broke
scripts that used "xz -9" on systems with low RAM).

Support spcifying the memory usage limit as a percentage
of RAM (e.g. --memory=50%).

Support --threads=0 to reset the thread limit to the default
value (number of available CPU cores). Use UINT32_MAX instead
of SIZE_MAX as the maximum in args.c. hardware.c was already
expecting uint32_t value.

Cleaned up the output of --help and --long-help.
2009-05-22 11:29:50 +03:00
Lasse Collin 071b825b23 Support special value "max" where xz and xzdec accept an integer.
Don't round the memory usage limit in xzdec --help to avoid
an integer overflow and to not give wrong impression that
the limit is high enough when it may not actually be.
2009-05-21 17:22:01 +03:00
ABCD 03ca67fd37 Install lzdiff, lzgrep, and lzmore as symlinks
This adds lzdiff, lzgrep, and lzmore to the list of symlinks to install.
It also installs symlinks for the manual pages and removes the new
symlinks on uninstall.
2009-05-21 16:25:36 +03:00
Lasse Collin a6f43e6412 Use a GCC-specific #pragma instead of GCC-specific
-Wno-uninitialized to silence a bogus warning.
2009-05-02 16:16:28 +03:00
Lasse Collin 21c6b94373 Fixed a crash in liblzma.
liblzma tries to avoid useless free()/malloc() pairs in
initialization when multiple files are handled using the
same lzma_stream. This didn't work with filter chains
due to comparison of wrong pointers in lzma_next_coder_init(),
making liblzma think that no memory reallocation is needed
even when it actually is.

Easy way to trigger this bug is to decompress two files with
a single xz command. The first file should have e.g. x86+LZMA2
as the filter chain, and the second file just LZMA2.
2009-04-28 23:08:32 +03:00
Lasse Collin e518d167aa Fix uint32_t -> size_t in ARM and ARM-Thumb filters.
On 64-bit system it would have gone into infinite
loop if a single input buffer was over 4 GiB (unlikely).
2009-04-15 14:13:38 +03:00
Lasse Collin 2f0bc9cd40 Quick & dirty update to support xz in diff/grep/more scripts. 2009-04-13 14:49:48 +03:00
Lasse Collin 02ddf09bc3 Put the interesting parts of XZ Utils into the public domain.
Some minor documentation cleanups were made at the same time.
2009-04-13 11:27:40 +03:00
Lasse Collin e79c42d854 Fix off-by-one in LZ decoder.
Fortunately, this bug had no security risk other than accepting
some corrupt files as valid.
2009-04-10 11:17:02 +03:00
Lasse Collin 390e69887f Fix wrong macro names in lc_cpucores.m4 and cpucores.h.
Thanks to Bert Wesarg.
2009-03-18 16:51:41 +02:00
Lasse Collin fd6a380f4e Add a rough explanation of --extreme to output of --help. 2009-02-22 19:07:54 +02:00
Lasse Collin 68bf7ac298 Fixes to progress message handling in xz:
- Don't use Windows-specific code on Windows. The old code
    required at least Windows 2000. Now it should work on
    Windows 98 and later, and maybe on Windows 95 too.

  - Use less precision when showing estimated remaining time.

  - Fix some small design issues.
2009-02-22 18:52:49 +02:00
Lasse Collin 47c2e21f82 Added files missing from the previous commit. 2009-02-18 13:00:10 +02:00
Lasse Collin 489a3dbaa0 Added lzma_easy_buffer_encode(). Splitted easy.c into small
pieces to avoid unneeded dependencies making statically
linked applications bigger than needed.
2009-02-17 10:43:00 +02:00
Lasse Collin 7494816ab0 Make physmem.h work on old Windows versions.
Thanks to Hongbo Ni for the original patch.
2009-02-15 15:48:45 +02:00
Lasse Collin 11ae4ae35f Fix microsecond vs. nanosecond confusion in my_time(). 2009-02-14 20:44:52 +02:00
Lasse Collin 3084d662d2 Cleanups to the code that detects the amount of RAM and
the number of CPU cores. Added support for using sysinfo()
on Linux systems whose libc lacks appropriate sysconf()
support (at least dietlibc). The Autoconf macros were
split into separate files, and CPU core count detection
was moved from hardware.c to cpucores.h. The core count
isn't used for anything real for now, so a problematic
part in process.c was commented out.
2009-02-14 00:45:29 +02:00
Lasse Collin fdbc0cfa71 Changed how the version number is specified in various places.
Now configure.ac will get the version number directly from
src/liblzma/api/lzma/version.h. The intent is to reduce the
number of places where the version number is duplicated. In
future, support for displaying Git commit ID may be added too.
2009-02-13 18:00:03 +02:00
Lasse Collin 1d924e584b Fix handling of integrity check type in the xz command line tool. 2009-02-13 17:30:30 +02:00
Lasse Collin 96c46df7de Improve support for DOS-like systems.
Here DOS-like means DOS, Windows, and OS/2.
2009-02-13 17:29:02 +02:00
Lasse Collin a3bbbe05d3 Let the user specify custom CFLAGS on the make command
line. Previously custom CFLAGS worked only when they were
passed to configure.
2009-02-09 14:54:31 +02:00
Lasse Collin 53f7598998 Fix aliasing issue in physmem.h. 2009-02-08 21:35:11 +02:00
Lasse Collin 0e27028d74 Add a separate internal function to initialize the CRC32
table, which is used also by LZ encoder. This was needed
because calling lzma_crc32() and ignoring the result is
a no-op due to lzma_attr_pure.
2009-02-08 18:24:50 +02:00
Lasse Collin ae1ad9af54 Make "xz --force" to write to terminal as the error
message suggests.
2009-02-08 18:17:05 +02:00
Lasse Collin 79e25eded4 Support both slash and backslash as path component
separator on Windows when parsing argv[0].
2009-02-08 10:37:50 +02:00
Lasse Collin 880c330938 Make it easy to choose if command line tools should be
linked statically or dynamically against liblzma. The
default is still to use static liblzma, but it can now
be changed by passing --enable-dynamic to configure.
Thanks to Mike Frysinger for the original patch.

Fixed a few minor bugs in configure.ac.
2009-02-07 21:17:07 +02:00
Lasse Collin bd7ca1dad5 Assume 32 MiB of RAM on unsupported operating systems like
the comment in hardware.c already said.
2009-02-07 17:07:52 +02:00
Lasse Collin bfd91198e4 Support LZMA_API_STATIC in assembler files to
avoid __declspec(dllexport) equivalent.
2009-02-07 15:55:47 +02:00
Lasse Collin 3306cf3883 Introduced LZMA_API_STATIC macro, which the applications
need to #define when linking against static liblzma on
platforms like Windows. Most developers don't need to
care about LZMA_API_STATIC at all.
2009-02-07 11:11:50 +02:00
Lasse Collin 75905a9afc Various code cleanups the the xz command line tool.
It now builds with MinGW.
2009-02-05 09:12:57 +02:00
Lasse Collin d0c0b9e94e Another utime() fix. 2009-02-03 12:15:17 +02:00
Lasse Collin ccf92a29e8 Fix wrong filename argument for utime() and utimes().
This doesn't affect most systems, since most systems
have better functions available.
2009-02-03 10:41:11 +02:00
Lasse Collin 99c1c2abfa Updated the x86 assembler code:
- Use call/ret pair to get instruction pointer for PIC.
  - Use PIC only if PIC or __PIC__ is #defined.
  - The code should work on MinGW and Darwin in addition
    to GNU/Linux and Solaris.
2009-02-02 21:19:01 +02:00
Lasse Collin 22a0c6dd94 Modify LZMA_API macro so that it works on Windows with
other compilers than MinGW. This may hurt readability
of the API headers slightly, but I don't know any
better way to do this.
2009-02-02 20:14:03 +02:00
Lasse Collin 8dd7b6052e Fix a bug in lzma_block_buffer_decode(), although this
function should be rewritten anyway.
2009-02-01 22:40:35 +02:00
Lasse Collin 55fd41431e Added initial version of raw buffer-to-buffer coding
functions, and cleaned up filter.h API header a little.
May be very buggy, not tested yet.
2009-02-01 22:39:07 +02:00
Lasse Collin 3e54ecee5c Fix missing newlines in xzdec.c. 2009-02-01 00:11:20 +02:00