Now extra buffer space is reserved so that repeating bytes for
any single match will never need to copy from two places (both
the beginning and the end of the buffer). This simplifies
dict_repeat() and helps a little with speed.
This seems to reduce .lzma decompression time about 2 %, so
with .xz and CRC it could be slightly less. The small things
add up still.
It's not completely obvious if this is better in the decoder.
It should be good if compiler can avoid creating a branch
(like using CMOV on x86).
This also makes lzma_encoder.c use the new macros.
The new decoder resumes the first decoder loop in the Resumable mode.
Then, the code executes in Non-resumable mode until it detects that it
cannot guarantee to have enough input/output to decode another symbol.
The Resumable mode is how the decoder has always worked. Before decoding
every input bit, it checks if there is enough space and will save its
location to be resumed later. When the decoder has more input/output,
it jumps back to the correct sequence in the Resumable mode code.
When the input/output buffers are large, the Resumable mode is much
slower than the Non-resumable because it has more branches and is harder
for the compiler to optimize since it is in a large switch block.
Early benchmarking shows significant time improvement (8-10% on gcc and
clang x86) by using the Non-resumable code as much as possible.
The new "safe" range decoder mode is the same as old range decoder, but
now the default behavior of the range decoder will not check if there is
enough input or output to complete the operation. When the buffers are
close to fully consumed, the "safe" operations must be used instead. This
will improve speed because it will reduce the number of branches needed
for most of the range decoder operations.
The main reason is a kind of silly one:
xz-man.pot contains strings from all man pages in XZ Utils.
The man pages of xzdiff, xzgrep, and xzmore were under GPLv2
and the rest under 0BSD. Thus xz-man.pot contained strings
under two licences. po4a creates the translated man pages
from the combined 0BSD+GPLv2 xz-man.pot.
I haven't liked this mixing in xz-man.pot but the
Translation Project requires that all man pages must be
in the same .pot file. So a separate xz-man-gpl.pot
wasn't an option.
Since these man pages are short, rewriting them was quick enough.
Now xz-man.pot is entirely under 0BSD and marking the per-file
licenses is simpler.
As a bonus, some wording hopefully is now slightly better
although it's perhaps a matter of taste.
NOTE: In xzgrep.1, the EXIT STATUS section was written by me
in the commit d796b6d7fd so that's
why that section could be taken as is from the old xzgrep.1.
Perhaps the generated files aren't even copyrightable but
using the same license for them as for the rest of the liblzma
keeps things more consistent for tools that look for license info.
The initial commit 5d018dc035
in 2007 had a comment in sha256.c that the code is based on
Crypto++ Library 5.5.1. In 2009 the Authors list in sha256.c
and the AUTHORS file was updated with information that the
code had come from Crypto++ but via 7-Zip. I know I had viewed
7-Zip's SHA-256 code but back then the C code has been identical
enough with Crypto++, so I don't why I thought the author info
would need that extra step via 7-Zip for this single file.
Another error is that I had mixed sha.* and shacal2.* files
when checking for author info in Crypto++. The shacal2.* files
aren't related to liblzma's sha256.c and thus Kevin Springle's
code in Crypto++ isn't either.
If liblzma is configured with --disable-clmul-crc
CFLAGS="-msse4.1 -mpclmul", then it will fail to compile because the
generic version must be used but the CRC tables were not included.
The code was using HAVE_FUNC_ATTRIBUTE_IFUNC instead of CRC_USE_IFUNC.
With ARM64, ifunc is incompatible because it requires non-inline
function calls for runtime detection.
Even though the proper name for the architecture is aarch64, this
project uses ARM64 throughout. So the rename is for consistency.
Additionally, crc32_arm64.h was slightly refactored for the following
changes:
* Added MSVC, FreeBSD, and macOS support in
is_arch_extension_supported().
* crc32_arch_optimized() now checks the size when aligning the
buffer.
* crc32_arch_optimized() loop conditions were slightly modified to
avoid both decrementing the size and incrementing the buffer
pointer.
* Use the intrinsic wrappers defined in <arm_acle.h> because GCC and
Clang name them differently.
* Minor spacing and comment changes.
The CRC_GENERIC is now split into CRC32_GENERIC and CRC64_GENERIC, since
the ARM64 optimizations will be different between CRC32 and CRC64.
For the same reason, CRC_ARCH_OPTIMIZED is split into
CRC32_ARCH_OPTIMIZED and CRC64_ARCH_OPTIMIZED.
ifunc will only be used with x86-64 CLMUL because the runtime detection
methods needed with ARM64 are not compatible with ifunc.
The CRC32 instructions in ARM64 can calculate the CRC32 result
for 8 bytes in a single operation, making the use of ARM64
instructions much faster compared to the general CRC32 algorithm.
Optimized CRC32 will be enabled if ARM64 has CRC extension
running on Linux.
Signed-off-by: Chenxi Mao <chenxi.mao2013@gmail.com>
This hopefully does more good than bad:
+ It's faster by default.
+ Only the threaded compressor creates files that
can be decompressed in threaded mode.
- Compression ratio is worse, usually not too much though.
When it matters, -T1 must be used.
- Memory usage increases.
- Scripts that assume single-threaded mode but don't use -T1 will
possibly use too much resources, for example, if they run
multiple xz processes in parallel to compress multiple files.
- Output from single-threaded and multi-threaded compressors
differ but such changes could happen for other reasons too
(they just haven't happened since 5.0.0).
Not all RISC-V processors support fast unaligned access so
it's better to read only one byte in the main loop. This can
be faster even on x86-64 when compared to reading 32 bits at
a time as half the time the address is only 16-bit aligned.
The downside is larger code size on archs that do support
fast unaligned access.
Version 5.6.0 will be shown, even though upcoming alphas and betas
will be able to support this filter. 5.6.0 looks nicer in the output and
people shouldn't be encouraged to use an unstable version in production
in any way.
The new Filter ID is 0x0B.
Thanks to Chien Wong <m@xv97.com> for the initial version of the Filter,
the xz CLI updates, and the Autotools build system modifications.
Thanks to Igor Pavlov for his many contributions to the design of
the filter.
Now crc_simd_body() in crc_x86_clmul.h is only called once
in a translation unit, we no longer need to be so cautious
about ensuring the always-inline behavior.
CRC_CLMUL was split to CRC_ARCH_OPTIMIZED and CRC_X86_CLMUL.
CRC_ARCH_OPTIMIZED is defined when an arch-optimized version is used.
Currently the x86 CLMUL implementations are the only arch-optimized
versions, and these also use the CRC_x86_CLMUL macro to tell when
crc_x86_clmul.h needs to be included.
is_clmul_supported() was renamed to is_arch_extension_supported().
crc32_clmul() and crc64_clmul() were renamed to
crc32_arch_optimized() and crc64_arch_optimized().
This way the names make sense with arch-specific non-CLMUL
implementations as well.
A CLMUL-only build will have the crcxx_clmul() inlined into
lzma_crcxx(). Previously a jump to the extern lzma_crcxx_clmul()
was needed. Notes about shared liblzma on ELF platforms:
- On platforms that support ifunc and -fvisibility=hidden, this
was silly because CLMUL-only build would have that single extra
jump instruction of extra overhead.
- On platforms that support neither -fvisibility=hidden nor linker
version script (liblzma*.map), jumping to lzma_crcxx_clmul()
would go via PLT so a few more instructions of overhead (still
not a big issue but silly nevertheless).
There was a downside with static liblzma too: if an application only
needs lzma_crc64(), static linking would make the linker include the
CLMUL code for both CRC32 and CRC64 from crc_x86_clmul.o even though
the CRC32 code wouldn't be needed, thus increasing code size of the
executable (assuming that -ffunction-sections isn't used).
Also, now compilers are likely to inline crc_simd_body()
even if they don't support the always_inline attribute
(or MSVC's __forceinline). Quite possibly all compilers
that build the code do support such an attribute. But now
it likely isn't a problem even if the attribute wasn't supported.
Now all x86-specific stuff is in crc_x86_clmul.h. If other archs
The other archs can then have their own headers with their own
is_clmul_supported() and crcxx_clmul().
Another bonus is that the build system doesn't need to care if
crc_clmul.c is needed.
is_clmul_supported() stays as inline function as it's not needed
when doing a CLMUL-only build (avoids a warning about unused function).
It requires fast unaligned access to 64-bit integers
and a fast instruction to count leading zeros in
a 64-bit integer (__builtin_ctzll()). This perhaps
should be enabled on some other archs too.
Thanks to Chenxi Mao for the original patch:
https://github.com/tukaani-project/xz/pull/75 (the first commit)
According to the numbers there, this may improve encoding
speed by about 3-5 %.
This enables the 8-byte method on MSVC ARM64 too which
should work but wasn't tested.
A very strict sandbox is used when the last file is decompressed. The
likely most common use case of xzdec is to decompress a single file.
The Pledge sandbox is applied to the entire process with slightly more
relaxed promises, until the last file is processed.
Thanks to Christian Weisgerber for the initial patch adding Pledge
sandboxing.
This fixes the recent change to lzma_lz_encoder that used memzero
instead of the NULL constant. On some compilers the NULL constant
(always 0) may not equal the NULL pointer (this only needs to guarentee
to not point to valid memory address).
Later code compares the pointers to the NULL pointer so we must
initialize them with the NULL pointer instead of 0 to guarentee
code correctness.
The first member of lzma_lz_encoder doesn't necessarily need to be set
to NULL since it will always be set before anything tries to use it.
However the function pointer members must be set to NULL since other
functions rely on this NULL value to determine if this behavior is
supported or not.
This fixes a somewhat serious bug, where the options_update() and
set_out_limit() function pointers are not set to NULL. This seems to
have been forgotten since these function pointers were added many years
after the original two (code() and end()).
The problem is that by not setting this to NULL we are relying on the
memory allocation to zero things out if lzma_filters_update() is called
on a LZMA1 encoder. The function pointer for set_out_limit() is less
serious because there is not an API function that could call this in an
incorrect way. set_out_limit() is only called by the MicroLZMA encoder,
which must use LZMA1 where set_out_limit() is always set. Its currently
not possible to call set_out_limit() on an LZMA2 encoder at this time.
So calling lzma_filters_update() on an LZMA1 encoder had undefined
behavior since its possible that memory could be manipulated so the
options_update member pointed to a different instruction sequence.
This is unlikely to be a bug in an existing application since it relies
on calling lzma_filters_update() on an LZMA1 encoder in the first place.
For instance, it does not affect xz because lzma_filters_update() can
only be used when encoding to the .xz format.
This is fixed by using memzero() to set all members of lzma_lz_encoder
to NULL after it is allocated. This ensures this mistake will not occur
here in the future if any additional function pointers are added.
lzma_raw_encoder() and lzma_raw_encoder_init() used "options" as the
parameter name instead of "filters" (used by the declaration). "filters"
is more clear since the parameter represents the list of filters passed
to the raw encoder, each of which contains filter options.
lzma_encoder_init() did not check for NULL options, but
lzma2_encoder_init() did. This is more of a code style improvement than
anything else to help make lzma_encoder_init() and lzma2_encoder_init()
more similar.
The new is_tty() will report if a file descriptor is a terminal or not.
On POSIX systems, it is a wrapper around isatty(). However, the native
Windows implementation of isatty() will return true for all character
devices, not just terminals. So is_tty() has a special case for Windows
so it can use alternative Windows API functions to determine if a file
descriptor is a terminal.
This fixes a bug with MSVC and MinGW-w64 builds that refused to read from
or write to non-terminal character devices because xz thought it was a
terminal. For instance:
xz foo -c > /dev/null
would fail because /dev/null was assumed to be a terminal.
The following command caused a segmentation fault:
xz -Fraw --lzma1 --files=foo
when foo was a valid file. The usage of --files or --files0 was not
being checked when compressing or decompressing in raw mode without a
suffix. The suffix checking code was meant to validate that all files
to be processed are "-" (if not writing to standard out), meaning the
data is only coming from standard in. In this case, there were no file
names to check since --files and --files0 store their file name in a
different place.
Later code assumed the suffix was set and caused a segmentation fault.
Now, the above command results in an error.
The previous version set opt_stdout, but this caused an issue with
copying an input file to standard out when decompressing an unknown file
type. The following needs to result in an error:
echo foo | xz -df
since -c, --stdout is not used. This fixes the previous error by not
setting opt_stdout.
This fixes a bug introduced in cc5aa9ab13
when the suffix check was initially moved. This caused a situation that
previously worked:
echo foo | xz -Fraw --lzma1 | wc -c
to fail because the old code knew that this would write to standard out
so a suffix was not needed.
If the -c, --stdout argument is not used, then we can still detect when
the data will be written to standard out if all of the provided
filenames are "-" (denoting standard in) or if no filenames are
provided.
The macro lzma_attr_visibility_hidden has to be defined to make
fastpos.h usable. The visibility attribute is irrelevant to
fastpos_tablegen.c so simply #define the macro to an empty value.
fastpos_tablegen.c is never built by the included build systems
and so the problem wasn't noticed earlier. It's just a standalone
program for generating fastpos_table.c.
Fixes: https://github.com/tukaani-project/xz/pull/69
Thanks to GitHub user Jamaika1.
In ELF shared libs:
-fvisibility=hidden affects definitions of symbols but not
declarations.[*] This doesn't affect direct calls to functions
inside liblzma as a linker can replace a call to lzma_foo@plt
with a call directly to lzma_foo when -fvisibility=hidden is used.
[*] It has to be like this because otherwise every installed
header file would need to explictly set the symbol visibility
to default.
When accessing extern variables that aren't defined in the
same translation unit, compiler assumes that the variable has
the default visibility and thus indirection is needed. Unlike
function calls, linker cannot optimize this.
Using __attribute__((__visibility__("hidden"))) with the extern
variable declarations tells the compiler that indirection isn't
needed because the definition is in the same shared library.
About 15+ years ago, someone told me that it would be good if
the CRC tables would be defined in the same translation unit
as the C code of the CRC functions. While I understood that it
could help a tiny amount, I didn't want to change the code because
a separate translation unit for the CRC tables was needed for the
x86 assembly code anyway. But when visibility attributes are
supported, simply marking the extern declaration with the
hidden attribute will get identical result. When there are only
a few affected variables, this is trivial to do. I wish I had
understood this back then already.
MinGW (formely a MinGW.org Project, later the MinGW.OSDN Project
at <https://osdn.net/projects/mingw/>) has GCC 9.2.0 as the
most recent GCC package (released 2021-02-02). The project might
still be alive but majority of people have switched to MinGW-w64.
Thus it seems clearer to refer to MinGW-w64 in our API headers too.
Building with MinGW is likely to still work but I haven't tested it
in the recent years.
It properly adds -DLZMA_API_STATIC when compiling code that
will be linked against static liblzma. Having it there on
systems other than Windows does no harm.
See: https://www.msys2.org/docs/pkgconfig/
This removes support for FreeBSD 10.0 and 10.1 which used
<sys/capability.h> instead of <sys/capsicum.h>. Support for
FreeBSD 10.1 ended on 2016-12-31. So now FreeBSD >= 10.2 is
required to enable Capsicum support.
This also removes support for Capsicum on Linux (libcaprights)
which seems to have been unmaintained since 2017 and Linux 4.11:
https://github.com/google/capsicum-linux
This commit alone doesn't change anything in the real-world:
- configure.ac currently checks for clock_gettime() only
when using pthreads.
- CMakeLists.txt doesn't check for clock_gettime() on Windows.
So clock_gettime() wasn't used with MinGW-w64 before either.
clock_gettime() provides monotonic time and it's better than
gettimeofday() in this sense. But clock_gettime() is defined
in winpthreads, and liblzma or xz needs nothing else from
winpthreads. By avoiding clock_gettime(), we avoid the dependency on
libwinpthread-1.dll or the need to link against the static version.
As a bonus, GetTickCount64() and MinGW-w64's gettimeofday() can be
faster than clock_gettime(CLOCK_MONOTONIC, &tv). The resolution
is more than good enough for the progress indicator in xz.
This partially reverts creating crc_clmul.c
(8c0f9376f5) where is_clmul_supported()
was moved, extern'ed, and renamed to lzma_is_clmul_supported(). This
caused a problem when the function call to lzma_is_clmul_supported()
results in a call through the PLT. ifunc resolvers run very early in
the dynamic loading sequence, so the PLT may not be setup properly at
this point. Whether the PLT is used or not for
lzma_is_clmul_supported() depened upon the compiler-toolchain used and
flags.
In liblzma compiled with GCC, for instance, GCC will go through the PLT
for function calls internal to liblzma if the version scripts and
symbol visibility hiding are not used. If lazy-binding is disabled,
then it would have made any program linked with liblzma fail during
dynamic loading in the ifunc resolver.
Currently crc32 is always enabled, so COND_CHECK_CRC32 must always be
set. Because of this, it makes the recent change to conditionally
compile check/crc_clmul.c appear wrong since that file has CLMUL
implementations for both CRC32 and CRC64.
After forcing crc_simd_body() to always be inlined it caused
-fsanitize=address to fail for lzma_crc32_clmul() and
lzma_crc64_clmul(). The __no_sanitize_address__ attribute was added
to lzma_crc32_clmul() and lzma_crc64_clmul(), but not removed from
crc_simd_body(). ASAN and inline functions behavior has changed over
the years for GCC specifically, so while strictly required we will
keep __attribute__((__no_sanitize_address__)) on crc_simd_body() in
case this becomes a requirement in the future.
Older GCC versions refuse to inline a function with ASAN if the
caller and callee do not agree on sanitization flags
(https://gcc.gnu.org/bugzilla/show_bug.cgi?id=89124#c3). If the
function was forced to be inlined, it will not compile if the callee
function has __no_sanitize_address__ but the caller doesn't.
In XZ Utils context this doesn't matter much because
unaligned reads and writes aren't used in hot code
when TUKLIB_FAST_UNALIGNED_ACCESS isn't #defined.
After testing a 32-bit Release build on MSVC, only lzma_crc64_clmul()
has the bug. crc_simd_body() and lzma_crc32_clmul() do not need the
optimizations disabled.
Forcing this to be inline has a significant speed improvement at the
cost of a few repeated instructions. The compilers tested on did not
inline this function since it is large and is used twice in the same
translation unit.
This macro must be used instead of the inline keyword. On MSVC, it is
a replacement for __forceinline which is an MSVC specific keyword that
should not be used with inline (it will issue a warning if it is).
It does not use a build system check to determine if
__attribute__((__always_inline__)) since all compilers that can use
CLMUL extensions (except the special case for MSVC) should support this
attribute. If this assumption is incorrect then it will result in a bug
report instead of silently producing slow code.
A detailed description of the three dispatch methods was added. Also,
duplicated comments now only appear in crc32_fast.c or were removed from
both crc32_fast.c and crc64_fast.c if they appeared in crc_clmul.c.
Both crc32_clmul() and crc64_clmul() are now exported from
crc32_clmul.c as lzma_crc32_clmul() and lzma_crc64_clmul(). This
ensures that is_clmul_supported() (now lzma_is_clmul_supported()) is
not duplicated between crc32_fast.c and crc64_fast.c.
Also, it encapsulates the complexity of the CLMUL implementations into a
single file and reduces the complexity of crc32_fast.c and crc64_fast.c.
Before, CLMUL code was present in crc32_fast.c, crc64_fast.c, and
crc_common.h.
During the conversion, various cleanups were applied to code (thanks to
Lasse Collin) including:
- Require using semicolons with MASK_/L/H/LH macros.
- Variable typing and const handling improvements.
- Improvements to comments.
- Fixes to the pragmas used.
- Removed unneeded variables.
- Whitespace improvements.
- Fixed CRC_USE_GENERIC_FOR_SMALL_INPUTS handling.
- Silenced warnings and removed the need for some #pragmas
Lasse Collin
Jia Tan
Chenxi Mao
Kian-Meng Ang
Hans Jansen