Document CMake options in INSTALL

This commit is contained in:
Lasse Collin 2024-06-24 19:58:54 +03:00
parent 3faf4e8079
commit 2a47be823c
1 changed files with 106 additions and 9 deletions

115
INSTALL
View File

@ -16,7 +16,7 @@ XZ Utils Installation
1.2.8. DOS
1.2.9. z/OS
1.3. Adding support for new platforms
2. configure options
2. configure and CMake options
2.1. Static vs. dynamic linking of liblzma
2.2. Optimizing xzdec and lzmadec
3. xzgrep and other scripts
@ -213,19 +213,53 @@ XZ Utils Installation
in C89 or C++.
2. configure options
--------------------
2. configure and CMake options
------------------------------
In most cases, the defaults are what you want. Many of the options
below are useful only when building a size-optimized version of
liblzma or command line tools.
configure options are those that begin with two dashes "--"
or "gl_".
CMake options begin with "XZ_", "TUKLIB_", or "CMAKE_". To use
them on the command line, prefix them with "-D", for example,
"cmake -DCMAKE_COMPILE_WARNING_AS_ERROR=ON".
CMAKE_BUILD_TYPE=TYPE
CMake only:
For release builds, CMAKE_BUILD_TYPE=Release is fine.
On targets where CMake defaults to -O3, the default
value is overridden to -O2.
Empty value (CMAKE_BUILD_TYPE=) is fine if using custom
optimization options. *In this package* the empty build
type also disables debugging code just like "Release"
does. To enable debugging code with empty build type,
use -UNDEBUG in the CFLAGS environment variable or in
the CMAKE_C_FLAGS CMake variable to override -DNDEBUG.
Non-standard build types like "None" do NOT disable
debugging code! Such non-standard build types should
be avoided for production builds!
--enable-encoders=LIST
--disable-encoders
Specify a comma-separated LIST of filter encoders to
build. See "./configure --help" for exact list of
available filter encoders. The default is to build all
supported encoders.
XZ_ENCODERS=LIST
Specify a LIST of filter encoders to build. In the
configure option the list is comma separated.
CMake lists are semicolon separated.
To see the exact list of available filter encoders:
- Autotools: ./configure --help
- CMake: Configure the tree normally first, then use
"cmake -LH ." to list the cache variables.
The default is to build all supported encoders.
If LIST is empty or --disable-encoders is used, no filter
encoders will be built and also the code shared between
@ -237,10 +271,12 @@ XZ Utils Installation
--enable-decoders=LIST
--disable-decoders
XZ_DECODERS=LIST
This is like --enable-encoders but for decoders. The
default is to build all supported decoders.
--enable-match-finders=LIST
XZ_MATCH_FINDERS=LIST
liblzma includes two categories of match finders:
hash chains and binary trees. Hash chains (hc3 and hc4)
are quite fast but they don't provide the best compression
@ -257,9 +293,11 @@ XZ Utils Installation
or LZMA2 filter encoders are being built.
--enable-checks=LIST
XZ_CHECKS=LIST
liblzma support multiple integrity checks. CRC32 is
mandatory, and cannot be omitted. See "./configure --help"
for exact list of available integrity check types.
mandatory, and cannot be omitted. Supported check
types are "crc32", "crc64", and "sha256". By default
all supported check types are enabled.
liblzma and the command line tools can decompress files
which use unsupported integrity check type, but naturally
@ -270,6 +308,7 @@ XZ Utils Installation
it is known to not cause problems.
--enable-external-sha256
XZ_EXTERNAL_SHA256=ON
Try to use SHA-256 code from the operating system libc
or similar base system libraries. This doesn't try to
use OpenSSL or libgcrypt or such libraries.
@ -306,6 +345,8 @@ XZ Utils Installation
time xz --test foo.xz
--disable-microlzma
XZ_MICROLZMA_ENCODER=OFF
XZ_MICROLZMA_DECODER=OFF
Don't build MicroLZMA encoder and decoder. This omits
lzma_microlzma_encoder() and lzma_microlzma_decoder()
API functions from liblzma. These functions are needed
@ -313,6 +354,7 @@ XZ Utils Installation
erofs-utils but they may be used by others too.
--disable-lzip-decoder
XZ_LZIP_DECODER=OFF
Disable decompression support for .lz (lzip) files.
This omits the API function lzma_lzip_decoder() from
liblzma and .lz support from the xz tool.
@ -321,6 +363,10 @@ XZ Utils Installation
--disable-xzdec
--disable-lzmadec
--disable-lzmainfo
XZ_TOOL_XZ=OFF
XZ_TOOL_XZDEC=OFF
XZ_TOOL_LZMADEC=OFF
XZ_TOOL_LZMAINFO=OFF
Don't build and install the command line tool mentioned
in the option name.
@ -330,29 +376,40 @@ XZ Utils Installation
a dangling man page symlink lzmadec.1 -> xzdec.1 is
created.
XZ_TOOL_SYMLINKS=OFF
Don't create the unxz and xzcat symlinks. (There is
no "configure" option to disable these symlinks.)
--disable-lzma-links
XZ_TOOL_SYMLINKS_LZMA=OFF
Don't create symlinks for LZMA Utils compatibility.
This includes lzma, unlzma, and lzcat. If scripts are
installed, also lzdiff, lzcmp, lzgrep, lzegrep, lzfgrep,
lzmore, and lzless will be omitted if this option is used.
--disable-scripts
XZ_TOOL_SCRIPTS=OFF
Don't install the scripts xzdiff, xzgrep, xzmore, xzless,
and their symlinks.
--disable-doc
XZ_DOC=OFF
Don't install the documentation files to $docdir
(often /usr/doc/xz or /usr/local/doc/xz). Man pages
will still be installed. The $docdir can be changed
with --docdir=DIR.
--enable-doxygen
XZ_DOXYGEN=ON
Enable generation of the HTML version of the liblzma API
documentation using Doxygen. The resulting files are
installed to $docdir/api. This option assumes that
the 'doxygen' tool is available.
NOTE: --disable-doc or XZ_DOC=OFF don't affect this.
--disable-assembler
XZ_ASM_I386=OFF
This disables CRC32 and CRC64 assembly code on
32-bit x86. This option currently does nothing
on other architectures (not even on x86-64).
@ -365,7 +422,16 @@ XZ Utils Installation
pre-i686 systems, you may want to disable the assembler
code.
The assembly code is compatible with only certain OSes
and toolchains (it's not compatible with MSVC).
Since XZ Utils 5.7.1alpha, the 32-bit x86 assembly code
co-exists with the modern CLMUL code: CLMUL is used if
support for it is detected at runtime. On old processors
the assembly code is used.
--disable-clmul-crc
XZ_CLMUL_CRC=OFF
Disable the use of carryless multiplication for CRC
calculation even if compiler support for it is detected.
The code uses runtime detection of SSSE3, SSE4.1, and
@ -378,6 +444,7 @@ XZ Utils Installation
detection isn't used and the generic code is omitted.
--disable-arm64-crc32
XZ_ARM64_CRC32=OFF
Disable the use of the ARM64 CRC32 instruction extension
even if compiler support for it is detected. The code will
detect support for the instruction at runtime.
@ -388,6 +455,7 @@ XZ Utils Installation
generic code is omitted.
--enable-unaligned-access
TUKLIB_FAST_UNALIGNED_ACCESS=ON
Allow liblzma to use unaligned memory access for 16-bit,
32-bit, and 64-bit loads and stores. This should be
enabled only when the hardware supports this, that is,
@ -435,6 +503,7 @@ XZ Utils Installation
how unaligned access is done in the C code.
--enable-unsafe-type-punning
TUKLIB_USE_UNSAFE_TYPE_PUNNING=ON
This enables use of code like
uint8_t *buf8 = ...;
@ -451,6 +520,7 @@ XZ Utils Installation
GCC 3 and early 4.x on x86, GCC < 6 on ARMv6 and ARMv7).
--enable-small
XZ_SMALL=ON
Reduce the size of liblzma by selecting smaller but
semantically equivalent version of some functions, and
omit precomputed lookup tables. This option tends to
@ -467,6 +537,7 @@ XZ Utils Installation
flag(s) to CFLAGS manually.
--enable-assume-ram=SIZE
XZ_ASSUME_RAM=SIZE
On the most common operating systems, XZ Utils is able to
detect the amount of physical memory on the system. This
information is used by the options --memlimit-compress,
@ -483,6 +554,7 @@ XZ Utils Installation
src/common/tuklib_physmem.c for details.
--enable-threads=METHOD
XZ_THREADS=METHOD
Threading support is enabled by default so normally there
is no need to specify this option.
@ -519,6 +591,7 @@ XZ Utils Installation
one thread, something bad may happen.
--enable-sandbox=METHOD
XZ_SANDBOX=METHOD
There is limited sandboxing support in the xz and xzdec
tools. If built with sandbox support, xz uses it
automatically when (de)compressing exactly one file to
@ -554,6 +627,7 @@ XZ Utils Installation
is found, configure will give an error.
--enable-symbol-versions[=VARIANT]
XZ_SYMBOL_VERSIONING=VARIANT
Use symbol versioning for liblzma shared library.
This is enabled by default on GNU/Linux (glibc only),
other GNU-based systems, and FreeBSD.
@ -598,13 +672,25 @@ XZ Utils Installation
run-time consistency checks. It makes the code slower, so
you normally don't want to have this enabled.
In CMake, the build type (CMAKE_BUILD_TYPE) controls if
-DNDEBUG is passed to the compiler. *In this package*,
an empty build type disables debugging code too.
Non-standard build types like "None" do NOT disable
debugging code!
To enable debugging code with empty build type in CMake,
use -UNDEBUG in the CFLAGS environment variable or in
the CMAKE_C_FLAGS CMake variable to override -DNDEBUG.
--enable-werror
CMAKE_COMPILE_WARNING_AS_ERROR=ON (CMake >= 3.24)
If building with GCC, make all compiler warnings an error,
that abort the compilation. This may help catching bugs,
and should work on most systems. This has no effect on the
resulting binaries.
--enable-path-for-scripts=PREFIX
(CMake determines this from the path of XZ_POSIX_SHELL)
If PREFIX isn't empty, PATH=PREFIX:$PATH will be set in
the beginning of the scripts (xzgrep and others).
The default is empty except on Solaris the default is
@ -621,6 +707,17 @@ XZ Utils Installation
the PATH for the scripts. It is described in section 3.2
and is supported in this xz version too.
gl_cv_posix_shell=/path/to/bin/sh
XZ_POSIX_SHELL=/path/to/bin/sh
POSIX shell to use for xzgrep and other scripts.
- configure should autodetect this well enough.
Typically it's /bin/sh but in some cases, like
Solaris, something else is used.
- CMake build uses /bin/sh except on Solaris the
default is /usr/xpg4/bin/sh.
2.1. Static vs. dynamic linking of liblzma