xz/doc/faq.txt

225 lines
9.2 KiB
Plaintext
Raw Normal View History

2007-12-08 22:42:33 +00:00
XZ Utils FAQ
============
2007-12-08 22:42:33 +00:00
Q: What do the letters XZ mean?
2007-12-08 22:42:33 +00:00
A: Nothing. They are just two letters, which come from the file format
suffix .xz. The .xz suffix was selected, because it seemed to be
2010-10-02 09:07:33 +00:00
pretty much unused. It has no deeper meaning.
2007-12-08 22:42:33 +00:00
Q: What are LZMA and LZMA2?
2007-12-08 22:42:33 +00:00
A: LZMA stands for Lempel-Ziv-Markov chain-Algorithm. It is the name
of the compression algorithm designed by Igor Pavlov for 7-Zip.
LZMA is based on LZ77 and range encoding.
2007-12-08 22:42:33 +00:00
LZMA2 is an updated version of the original LZMA to fix a couple of
practical issues. In context of XZ Utils, LZMA is called LZMA1 to
emphasize that LZMA is not the same thing as LZMA2. LZMA2 is the
primary compression algorithm in the .xz file format.
2007-12-08 22:42:33 +00:00
Q: There are many LZMA related projects. How does XZ Utils relate to them?
2007-12-08 22:42:33 +00:00
A: 7-Zip and LZMA SDK are the original projects. LZMA SDK is roughly
a subset of the 7-Zip source tree.
2007-12-08 22:42:33 +00:00
p7zip is 7-Zip's command-line tools ported to POSIX-like systems.
2007-12-08 22:42:33 +00:00
LZMA Utils provide a gzip-like lzma tool for POSIX-like systems.
LZMA Utils are based on LZMA SDK. XZ Utils are the successor to
LZMA Utils.
2007-12-08 22:42:33 +00:00
There are several other projects using LZMA. Most are more or less
2010-10-02 09:07:33 +00:00
based on LZMA SDK. See <http://7-zip.org/links.html>.
Q: Why is liblzma named liblzma if its primary file format is .xz?
Shouldn't it be e.g. libxz?
A: When the designing of the .xz format began, the idea was to replace
the .lzma format and use the same .lzma suffix. It would have been
quite OK to reuse the suffix when there were very few .lzma files
around. However, the old .lzma format became popular before the
2010-10-02 09:07:33 +00:00
new format was finished. The new format was renamed to .xz but the
name of liblzma wasn't changed.
2007-12-08 22:42:33 +00:00
Q: Do XZ Utils support the .7z format?
2007-12-08 22:42:33 +00:00
A: No. Use 7-Zip (Windows) or p7zip (POSIX-like systems) to handle .7z
files.
2007-12-08 22:42:33 +00:00
Q: I have many .tar.7z files. Can I convert them to .tar.xz without
spending hours recompressing the data?
2007-12-08 22:42:33 +00:00
A: In the "extra" directory, there is a script named 7z2lzma.bash which
is able to convert some .7z files to the .lzma format (not .xz). It
needs the 7za (or 7z) command from p7zip. The script may silently
produce corrupt output if certain assumptions are not met, so
decompress the resulting .lzma file and compare it against the
original before deleting the original file!
2007-12-08 22:42:33 +00:00
Q: I have many .lzma files. Can I quickly convert them to the .xz format?
2007-12-08 22:42:33 +00:00
A: For now, no. Since XZ Utils supports the .lzma format, it's usually
not too bad to keep the old files in the old format. If you want to
do the conversion anyway, you need to decompress the .lzma files and
then recompress to the .xz format.
2007-12-08 22:42:33 +00:00
Technically, there is a way to make the conversion relatively fast
(roughly twice the time that normal decompression takes). Writing
such a tool would take quite a bit of time though, and would probably
be useful to only a few people. If you really want such a conversion
tool, contact Lasse Collin and offer some money.
2007-12-08 22:42:33 +00:00
Q: I have installed xz, but my tar doesn't recognize .tar.xz files.
How can I extract .tar.xz files?
A: xz -dc foo.tar.xz | tar xf -
Q: Can I recover parts of a broken .xz file (e.g. a corrupted CD-R)?
2007-12-08 22:42:33 +00:00
A: It may be possible if the file consists of multiple blocks, which
typically is not the case if the file was created in single-threaded
mode. There is no recovery program yet.
2007-12-08 22:42:33 +00:00
Q: Is (some part of) XZ Utils patented?
2007-12-08 22:42:33 +00:00
A: Lasse Collin is not aware of any patents that could affect XZ Utils.
However, due to the nature of software patents, it's not possible to
guarantee that XZ Utils isn't affected by any third party patent(s).
2007-12-08 22:42:33 +00:00
Q: Where can I find documentation about the file format and algorithms?
2007-12-08 22:42:33 +00:00
A: The .xz format is documented in xz-file-format.txt. It is a container
format only, and doesn't include descriptions of any non-trivial
filters.
2007-12-08 22:42:33 +00:00
Documenting LZMA and LZMA2 is planned, but for now, there is no other
documentation than the source code. Before you begin, you should know
the basics of LZ77 and range-coding algorithms. LZMA is based on LZ77,
2010-10-02 09:07:33 +00:00
but LZMA is a lot more complex. Range coding is used to compress
the final bitstream like Huffman coding is used in Deflate.
2007-12-08 22:42:33 +00:00
Q: I cannot find BCJ and BCJ2 filters. Don't they exist in liblzma?
A: BCJ filter is called "x86" in liblzma. BCJ2 is not included,
because it requires using more than one encoded output stream.
2010-10-02 09:07:33 +00:00
A streamable version of BCJ2-style filtering is planned.
Q: I need to use a script that runs "xz -9". On a system with 256 MiB
of RAM, xz says that it cannot allocate memory. Can I make the
script work without modifying it?
A: Set a default memory usage limit for compression. You can do it e.g.
in a shell initialization script such as ~/.bashrc or /etc/profile:
XZ_DEFAULTS=--memlimit-compress=150MiB
export XZ_DEFAULTS
xz will then scale the compression settings down so that the given
memory usage limit is not reached. This way xz shouldn't run out
of memory.
Check also that memory-related resource limits are high enough.
On most systems, "ulimit -a" will show the current resource limits.
Q: How do I create files that can be decompressed with XZ Embedded?
A: See the documentation in XZ Embedded. In short, something like
this is a good start:
xz --check=crc32 --lzma2=preset=6e,dict=64KiB
Or if a BCJ filter is needed too, e.g. if compressing
a kernel image for PowerPC:
xz --check=crc32 --powerpc --lzma2=preset=6e,dict=64KiB
Adjust the dictionary size to get a good compromise between
2010-10-02 09:07:33 +00:00
compression ratio and decompressor memory usage. Note that
in single-call decompression mode of XZ Embedded, a big
dictionary doesn't increase memory usage.
Q: Will xz support threaded compression?
A: It is planned and has been taken into account when designing
the .xz file format. Eventually there will probably be three types
of threading, each method having its own advantages and disadvantages.
The simplest method is splitting the uncompressed data into blocks
and compressing them in parallel independent from each other.
Since the blocks are compressed independently, they can also be
decompressed independently. Together with the index feature in .xz,
this allows using threads to create .xz files for random-access
reading. This also makes threaded decompression possible, although
it is not clear if threaded decompression will ever be implemented.
The independent blocks method has a couple of disadvantages too. It
will compress worse than a single-block method. Often the difference
is not too big (maybe 1-2 %) but sometimes it can be too big. Also,
the memory usage of the compressor increases linearly when adding
threads.
Match finder parallelization is another threading method. It has
been in 7-Zip for ages. It doesn't affect compression ratio or
memory usage significantly. Among the three threading methods, only
this is useful when compressing small files (files that are not
significantly bigger than the dictionary). Unfortunately this method
scales only to about two CPU cores.
The third method is pigz-style threading (I use that name, because
pigz <http://www.zlib.net/pigz/> uses that method). It doesn't
affect compression ratio significantly and scales to many cores.
The memory usage scales linearly when threads are added. This isn't
significant with pigz, because Deflate uses only a 32 KiB dictionary,
2010-10-02 09:07:33 +00:00
but with LZMA2 the memory usage will increase dramatically just like
with the independent-blocks method. There is also a constant
2010-10-02 09:07:33 +00:00
computational overhead, which may make pigz-method a bit dull on
dual-core compared to the parallel match finder method, but with more
cores the overhead is not a big deal anymore.
Combining the threading methods will be possible and also useful.
E.g. combining match finder parallelization with pigz-style threading
can cut the memory usage by 50 %.
It is possible that the single-threaded method will be modified to
create files identical to the pigz-style method. We'll see once
2010-10-02 09:07:33 +00:00
pigz-style threading has been implemented in liblzma.
2007-12-08 22:42:33 +00:00
Q: How do I build a program that needs liblzmadec (lzmadec.h)?
2007-12-08 22:42:33 +00:00
A: liblzmadec is part of LZMA Utils. XZ Utils has liblzma, but no
liblzmadec. The code using liblzmadec should be ported to use
liblzma instead. If you cannot or don't want to do that, download
2017-04-19 19:17:35 +00:00
LZMA Utils from <https://tukaani.org/lzma/>.
2007-12-08 22:42:33 +00:00
Q: The default build of liblzma is too big. How can I make it smaller?
2007-12-08 22:42:33 +00:00
A: Give --enable-small to the configure script. Use also appropriate
--enable or --disable options to include only those filter encoders
and decoders and integrity checks that you actually need. Use
CFLAGS=-Os (with GCC) or equivalent to tell your compiler to optimize
for size. See INSTALL for information about configure options.
2007-12-08 22:42:33 +00:00
If the result is still too big, take a look at XZ Embedded. It is
a separate project, which provides a limited but significantly
2010-10-02 09:07:33 +00:00
smaller XZ decoder implementation than XZ Utils. You can find it
2017-04-19 19:17:35 +00:00
at <https://tukaani.org/xz/embedded.html>.
2007-12-08 22:42:33 +00:00