xz/po/zh_TW.po

# Chinese translations for xz package.
# This file is put in the public domain.
#
# Yi-Jyun Pan <pan93412@gmail.com>, 2019, 2023
msgid ""
msgstr ""
"Project-Id-Version: xz 5.4.3\n"
"Report-Msgid-Bugs-To: xz@tukaani.org\n"
"POT-Creation-Date: 2024-05-28 21:28+0300\n"
"PO-Revision-Date: 2023-07-08 23:05+0800\n"
"Last-Translator: Yi-Jyun Pan <pan93412@gmail.com>\n"
"Language-Team: Chinese (traditional) <zh-l10n@lists.linux.org.tw>\n"
"Language: zh_TW\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
"X-Bugs: Report translation errors to the Language-Team address.\n"
"X-Generator: Poedit 3.3.2\n"
"X-Poedit-SourceCharset: UTF-8\n"

#: src/xz/args.c
#, c-format
msgid "%s: Invalid argument to --block-list"
msgstr "%s：傳入 --block-list 的參數無效"

#: src/xz/args.c
#, c-format
msgid "%s: Too many arguments to --block-list"
msgstr "%s：傳入 --block-list 的參數過多"

#: src/xz/args.c
msgid "0 can only be used as the last element in --block-list"
msgstr "0 只能作為 --block-list 的最後一個元素"

#: src/xz/args.c
#, c-format
msgid "%s: Unknown file format type"
msgstr "%s：未知檔案格式類型"

#: src/xz/args.c
#, c-format
msgid "%s: Unsupported integrity check type"
msgstr "%s：不支援的完整性檢查類型"

#: src/xz/args.c
msgid "Only one file can be specified with `--files' or `--files0'."
msgstr "「--files」或「--files0」只能指定一個檔案。"

#. TRANSLATORS: This is a translatable
#. string because French needs a space
#. before the colon ("%s : %s").
#: src/xz/args.c src/xz/coder.c src/xz/file_io.c src/xz/list.c
#, fuzzy, c-format
#| msgid "%s: "
msgid "%s: %s"
msgstr "%s："

#: src/xz/args.c
#, c-format
msgid "The environment variable %s contains too many arguments"
msgstr "%s 環境變數包含過多參數"

#: src/xz/args.c
msgid "Compression support was disabled at build time"
msgstr "已在編譯時停用壓縮支援"

#: src/xz/args.c
msgid "Decompression support was disabled at build time"
msgstr "已在編譯時停用解壓縮支援"

#: src/xz/args.c
msgid "Compression of lzip files (.lz) is not supported"
msgstr "不支援壓縮為 lzip 檔案 (.lz)"

#: src/xz/args.c
msgid "With --format=raw, --suffix=.SUF is required unless writing to stdout"
msgstr "搭配 --format=raw 時，除非寫入標準輸出，否則需要傳入 --suffix=.SUF"

#: src/xz/coder.c
msgid "Maximum number of filters is four"
msgstr "最多只能指定 4 個篩選器"

#: src/xz/coder.c
msgid "Memory usage limit is too low for the given filter setup."
msgstr "記憶體用量限制過低，不足以設定指定的篩選器。"

#: src/xz/coder.c
msgid "Using a preset in raw mode is discouraged."
msgstr "不建議在 Raw 模式使用設定檔。"

#: src/xz/coder.c
msgid "The exact options of the presets may vary between software versions."
msgstr "設定檔的選項可能因軟體版本而有異。"

#: src/xz/coder.c
msgid "The .lzma format supports only the LZMA1 filter"
msgstr ".lzma 格式僅支援 LZMA1 篩選器"

#: src/xz/coder.c
msgid "LZMA1 cannot be used with the .xz format"
msgstr "LZMA1 不能與 .xz 格式一同使用"

#: src/xz/coder.c
msgid "The filter chain is incompatible with --flush-timeout"
msgstr "篩選鏈不相容 --flush-timeout"

#: src/xz/coder.c
msgid "Switching to single-threaded mode due to --flush-timeout"
msgstr "因指定 --flush-timeout，因此切換到單執行緒模式"

#: src/xz/coder.c
#, c-format
msgid "Using up to %<PRIu32> threads."
msgstr "使用最多 %<PRIu32> 個執行緒。"

#: src/xz/coder.c
msgid "Unsupported filter chain or filter options"
msgstr "不支援的篩選鏈或篩選器選項"

#: src/xz/coder.c
#, c-format
msgid "Decompression will need %s MiB of memory."
msgstr "解壓縮將需要 %s MiB 的記憶體。"

#: src/xz/coder.c
#, c-format
msgid "Reduced the number of threads from %s to %s to not exceed the memory usage limit of %s MiB"
msgstr "已將執行緒數量從 %s 個減少至 %s 個，以不超過記憶體用量的 %s MiB 限制"

#: src/xz/coder.c
#, c-format
msgid "Reduced the number of threads from %s to one. The automatic memory usage limit of %s MiB is still being exceeded. %s MiB of memory is required. Continuing anyway."
msgstr "已將執行緒數量從 %s 減少至一個，但依然超出 %s MiB 的自動記憶體用量限制。需要 %s MiB 的記憶體。依然繼續執行。"

#: src/xz/coder.c
#, c-format
msgid "Switching to single-threaded mode to not exceed the memory usage limit of %s MiB"
msgstr "正在切換至單執行緒模式，以免超出 %s MiB 的記憶體用量限制"

#: src/xz/coder.c
#, c-format
msgid "Adjusted LZMA%c dictionary size from %s MiB to %s MiB to not exceed the memory usage limit of %s MiB"
msgstr "已將 LZMA%c 的字典大小從 %s MiB 調整至 %s MiB，以不超過記憶體用量的 %s MiB 限制"

#: src/xz/file_io.c
#, c-format
msgid "Error creating a pipe: %s"
msgstr "建立管線時發生錯誤：%s"

#: src/xz/file_io.c
msgid "Failed to enable the sandbox"
msgstr "無法啟用沙盒"

#: src/xz/file_io.c
#, c-format
msgid "%s: poll() failed: %s"
msgstr "%s：poll() 失敗：%s"

#. TRANSLATORS: When compression or decompression finishes,
#. and xz is going to remove the source file, xz first checks
#. if the source file still exists, and if it does, does its
#. device and inode numbers match what xz saw when it opened
#. the source file. If these checks fail, this message is
#. shown, %s being the filename, and the file is not deleted.
#. The check for device and inode numbers is there, because
#. it is possible that the user has put a new file in place
#. of the original file, and in that case it obviously
#. shouldn't be removed.
#: src/xz/file_io.c
#, c-format
msgid "%s: File seems to have been moved, not removing"
msgstr "%s：檔案似乎已經遷移，不移除"

#: src/xz/file_io.c
#, c-format
msgid "%s: Cannot remove: %s"
msgstr "%s：無法移除：%s"

#: src/xz/file_io.c
#, c-format
msgid "%s: Cannot set the file owner: %s"
msgstr "%s：無法設定檔案所有者：%s"

#: src/xz/file_io.c
#, c-format
msgid "%s: Cannot set the file group: %s"
msgstr "%s：無法設定檔案群組：%s"

#: src/xz/file_io.c
#, c-format
msgid "%s: Cannot set the file permissions: %s"
msgstr "%s：無法設定檔案權限：%s"

#: src/xz/file_io.c
#, c-format
msgid "Error getting the file status flags from standard input: %s"
msgstr "從標準輸入取得檔案狀態旗標時發生錯誤：%s"

#: src/xz/file_io.c
#, c-format
msgid "%s: Is a symbolic link, skipping"
msgstr "%s：是個符號連結，跳過"

#: src/xz/file_io.c
#, c-format
msgid "%s: Is a directory, skipping"
msgstr "%s：是個目錄，跳過"

#: src/xz/file_io.c
#, c-format
msgid "%s: Not a regular file, skipping"
msgstr "%s：不是一般檔案，跳過"

#: src/xz/file_io.c
#, c-format
msgid "%s: File has setuid or setgid bit set, skipping"
msgstr "%s：檔案已設定 setuid 或 setgid 位元，跳過"

#: src/xz/file_io.c
#, c-format
msgid "%s: File has sticky bit set, skipping"
msgstr "%s：檔案已設定黏性位元（sticky bit），跳過"

#: src/xz/file_io.c
#, c-format
msgid "%s: Input file has more than one hard link, skipping"
msgstr "%s：輸入檔有超過一個實際連結 (hard link)，跳過"

#: src/xz/file_io.c
msgid "Empty filename, skipping"
msgstr "空檔名，跳過"

#: src/xz/file_io.c
#, c-format
msgid "Error restoring the status flags to standard input: %s"
msgstr "將狀態旗標還原到標準輸入時發生錯誤：%s"

#: src/xz/file_io.c
#, c-format
msgid "Error getting the file status flags from standard output: %s"
msgstr "從標準輸出取得檔案狀態旗標時發生錯誤：%s"

#: src/xz/file_io.c
#, c-format
msgid "Error restoring the O_APPEND flag to standard output: %s"
msgstr "將 O_APPEND 旗標還原到標準輸出時發生錯誤：%s"

#: src/xz/file_io.c
#, c-format
msgid "%s: Closing the file failed: %s"
msgstr "%s：關閉檔案失敗：%s"

#: src/xz/file_io.c
#, c-format
msgid "%s: Seeking failed when trying to create a sparse file: %s"
msgstr "%s：嘗試建立疏鬆檔案時發生搜尋失敗：%s"

#: src/xz/file_io.c
#, c-format
msgid "%s: Read error: %s"
msgstr "%s：讀取時發生錯誤：%s"

#: src/xz/file_io.c
#, c-format
msgid "%s: Error seeking the file: %s"
msgstr "%s：搜尋檔案時發生錯誤：%s"

#: src/xz/file_io.c
#, c-format
msgid "%s: Unexpected end of file"
msgstr "%s：非期望的檔案結尾"

#: src/xz/file_io.c
#, c-format
msgid "%s: Write error: %s"
msgstr "%s：寫入時發生錯誤：%s"

#: src/xz/hardware.c
msgid "Disabled"
msgstr "已停用"

#: src/xz/hardware.c
msgid "Amount of physical memory (RAM):"
msgstr "實體記憶體 (RAM) 數量："

#: src/xz/hardware.c
msgid "Number of processor threads:"
msgstr "處理器執行緒的數量："

#: src/xz/hardware.c
msgid "Compression:"
msgstr "壓縮："

#: src/xz/hardware.c
msgid "Decompression:"
msgstr "解壓縮："

#: src/xz/hardware.c
msgid "Multi-threaded decompression:"
msgstr "多執行緒解壓縮："

#: src/xz/hardware.c
msgid "Default for -T0:"
msgstr "-T0 的預設值："

#: src/xz/hardware.c
msgid "Hardware information:"
msgstr "硬體資訊："

#: src/xz/hardware.c
msgid "Memory usage limits:"
msgstr "記憶體用量上限："

#: src/xz/list.c
msgid "Streams:"
msgstr "串流："

#: src/xz/list.c
msgid "Blocks:"
msgstr "區塊："

#: src/xz/list.c
msgid "Compressed size:"
msgstr "壓縮後大小："

#: src/xz/list.c
msgid "Uncompressed size:"
msgstr "壓縮前大小："

#: src/xz/list.c
msgid "Ratio:"
msgstr "壓縮比："

#: src/xz/list.c
msgid "Check:"
msgstr "檢查："

#: src/xz/list.c
msgid "Stream Padding:"
msgstr "串流填充："

#: src/xz/list.c
msgid "Memory needed:"
msgstr "所需記憶體："

#: src/xz/list.c
msgid "Sizes in headers:"
msgstr "檔頭中標示大小："

#: src/xz/list.c
msgid "Number of files:"
msgstr "檔案數："

#: src/xz/list.c
msgid "Stream"
msgstr "串流"

#: src/xz/list.c
msgid "Block"
msgstr "區塊"

#: src/xz/list.c
msgid "Blocks"
msgstr "區塊"

#: src/xz/list.c
msgid "CompOffset"
msgstr "壓縮偏移"

#: src/xz/list.c
msgid "UncompOffset"
msgstr "未壓縮偏移"

#: src/xz/list.c
msgid "CompSize"
msgstr "壓縮大小"

#: src/xz/list.c
msgid "UncompSize"
msgstr "未壓縮大小"

#: src/xz/list.c
msgid "TotalSize"
msgstr "總計大小"

#: src/xz/list.c
msgid "Ratio"
msgstr "比率"

#: src/xz/list.c
msgid "Check"
msgstr "檢查"

#: src/xz/list.c
msgid "CheckVal"
msgstr "檢查值"

#: src/xz/list.c
msgid "Padding"
msgstr "填充"

#: src/xz/list.c
msgid "Header"
msgstr "檔頭"

#: src/xz/list.c
msgid "Flags"
msgstr "旗標"

#: src/xz/list.c
msgid "MemUsage"
msgstr "Mem用量"

#: src/xz/list.c
msgid "Filters"
msgstr "篩選器"

#. TRANSLATORS: Indicates that there is no integrity check.
#. This string is used in tables. In older xz version this
#. string was limited to ten columns in a fixed-width font, but
#. nowadays there is no strict length restriction anymore.
#: src/xz/list.c
msgid "None"
msgstr "無"

#. TRANSLATORS: Indicates that integrity check name is not known,
#. but the Check ID is known (here 2). In older xz version these
#. strings were limited to ten columns in a fixed-width font, but
#. nowadays there is no strict length restriction anymore.
#: src/xz/list.c
msgid "Unknown-2"
msgstr "未知-2"

#: src/xz/list.c
msgid "Unknown-3"
msgstr "未知-3"

#: src/xz/list.c
msgid "Unknown-5"
msgstr "未知-5"

#: src/xz/list.c
msgid "Unknown-6"
msgstr "未知-6"

#: src/xz/list.c
msgid "Unknown-7"
msgstr "未知-7"

#: src/xz/list.c
msgid "Unknown-8"
msgstr "未知-8"

#: src/xz/list.c
msgid "Unknown-9"
msgstr "未知-9"

#: src/xz/list.c
msgid "Unknown-11"
msgstr "未知-11"

#: src/xz/list.c
msgid "Unknown-12"
msgstr "未知-12"

#: src/xz/list.c
msgid "Unknown-13"
msgstr "未知-13"

#: src/xz/list.c
msgid "Unknown-14"
msgstr "未知-14"

#: src/xz/list.c
msgid "Unknown-15"
msgstr "未知-15"

#: src/xz/list.c
#, c-format
msgid "%s: File is empty"
msgstr "%s：檔案是空的"

#: src/xz/list.c
#, c-format
msgid "%s: Too small to be a valid .xz file"
msgstr "%s：因過小而不認為是個有效 .xz 檔"

#. TRANSLATORS: These are column headings. From Strms (Streams)
#. to Ratio, the columns are right aligned. Check and Filename
#. are left aligned. If you need longer words, it's OK to
#. use two lines here. Test with "xz -l foo.xz".
#: src/xz/list.c
msgid "Strms  Blocks   Compressed Uncompressed  Ratio  Check   Filename"
msgstr " 串流    區塊       已壓縮       未壓縮   比例  檢驗碼  檔名"

#: src/xz/list.c
msgid "Yes"
msgstr "是"

#: src/xz/list.c
msgid "No"
msgstr "否"

#: src/xz/list.c
#, c-format
msgid "  Minimum XZ Utils version: %s\n"
msgstr "  最小 XZ 工具程式版本: %s\n"

#. TRANSLATORS: %s is an integer. Only the plural form of this
#. message is used (e.g. "2 files"). Test with "xz -l foo.xz bar.xz".
#: src/xz/list.c
#, c-format
msgid "%s file\n"
msgid_plural "%s files\n"
msgstr[0] "%s 個檔案\n"

#: src/xz/list.c
msgid "Totals:"
msgstr "總計："

#: src/xz/list.c
msgid "--list works only on .xz files (--format=xz or --format=auto)"
msgstr "--list 只能在 .xz 檔使用（--format=xz 或 --format=auto）"

#: src/xz/list.c
msgid "--list does not support reading from standard input"
msgstr "--list 不支援從標準輸入讀取"

#: src/xz/main.c
#, c-format
msgid "%s: Error reading filenames: %s"
msgstr "%s：讀取檔名時發生錯誤：%s"

#: src/xz/main.c
#, c-format
msgid "%s: Unexpected end of input when reading filenames"
msgstr "%s：讀取檔名時遇到非預期的輸入結尾"

#: src/xz/main.c
#, c-format
msgid "%s: Null character found when reading filenames; maybe you meant to use `--files0' instead of `--files'?"
msgstr "%s：讀取檔名時發現空字元；或許您想使用「--files0」而非「--files」？"

#: src/xz/main.c
msgid "Compression and decompression with --robot are not supported yet."
msgstr "尚未支援搭配 --robot 壓縮和解壓縮。"

#: src/xz/main.c
msgid "Cannot read data from standard input when reading filenames from standard input"
msgstr "從標準輸入讀取檔名時，無法從標準輸入讀取資料"

#. TRANSLATORS: This is the program name in the beginning
#. of the line in messages. Usually it becomes "xz: ".
#. This is a translatable string because French needs
#. a space before a colon.
#: src/xz/message.c
#, c-format
msgid "%s: "
msgstr "%s："

#: src/xz/message.c
msgid "Internal error (bug)"
msgstr "內部錯誤（臭蟲）"

#: src/xz/message.c
msgid "Cannot establish signal handlers"
msgstr "無法確立信號處理器"

#: src/xz/message.c
msgid "No integrity check; not verifying file integrity"
msgstr "沒有完整性檢查；不驗證檔案完整性"

#: src/xz/message.c
msgid "Unsupported type of integrity check; not verifying file integrity"
msgstr "未知完整性檢查類型；不驗證檔案完整性"

#: src/xz/message.c
msgid "Memory usage limit reached"
msgstr "達到記憶體用量上限"

#: src/xz/message.c
msgid "File format not recognized"
msgstr "無法識別檔案格式"

#: src/xz/message.c
msgid "Unsupported options"
msgstr "不支援的選項"

#: src/xz/message.c
msgid "Compressed data is corrupt"
msgstr "壓縮資料是損壞的"

#: src/xz/message.c
msgid "Unexpected end of input"
msgstr "遇到非預期輸入結尾"

#: src/xz/message.c
#, c-format
msgid "%s MiB of memory is required. The limiter is disabled."
msgstr "需要 %s MiB 的記憶體。已停用記憶體限制器。"

#: src/xz/message.c
#, c-format
msgid "%s MiB of memory is required. The limit is %s."
msgstr "需要 %s MiB 的記憶體。記憶體限制為 %s。"

#: src/xz/message.c
#, c-format
msgid "%s: Filter chain: %s\n"
msgstr "%s：篩選鏈：%s\n"

#: src/xz/message.c
#, c-format
msgid "Try `%s --help' for more information."
msgstr "嘗試「%s --help」取得更多資訊。"

#: src/xz/message.c
#, c-format
msgid ""
"Usage: %s [OPTION]... [FILE]...\n"
"Compress or decompress FILEs in the .xz format.\n"
"\n"
msgstr ""
"用法：%s [選項]... [檔案]...\n"
"用 .xz 格式壓縮，或解壓縮 .xz 格式中的 <檔案>。\n"
"\n"

#: src/xz/message.c
msgid "Mandatory arguments to long options are mandatory for short options too.\n"
msgstr "長選項的必填參數，對短選項也是必填。\n"

#: src/xz/message.c
msgid " Operation mode:\n"
msgstr " 操作模式：\n"

#: src/xz/message.c
msgid ""
"  -z, --compress      force compression\n"
"  -d, --decompress    force decompression\n"
"  -t, --test          test compressed file integrity\n"
"  -l, --list          list information about .xz files"
msgstr ""
"  -z, --compress      強制壓縮\n"
"  -d, --decompress    強制解壓縮\n"
"  -t, --test          測試壓縮檔完整性\n"
"  -l, --list          列出 .xz 檔的資訊"

#: src/xz/message.c
msgid ""
"\n"
" Operation modifiers:\n"
msgstr ""
"\n"
" 操作修飾詞：\n"

#: src/xz/message.c
msgid ""
"  -k, --keep          keep (don't delete) input files\n"
"  -f, --force         force overwrite of output file and (de)compress links\n"
"  -c, --stdout        write to standard output and don't delete input files"
msgstr ""
"  -k, --keep          保留（不刪除）輸入檔\n"
"  -f, --force         強制覆寫輸出檔並（解）壓縮連結\n"
"  -c, --stdout        寫入標準輸出並不刪除輸入檔"

#: src/xz/message.c
msgid ""
"      --single-stream decompress only the first stream, and silently\n"
"                      ignore possible remaining input data"
msgstr ""
"      --single-stream 僅解壓縮第一個串流，再\n"
"                      安靜地忽略可能剩餘的輸入檔"

#: src/xz/message.c
msgid ""
"      --no-sparse     do not create sparse files when decompressing\n"
"  -S, --suffix=.SUF   use the suffix `.SUF' on compressed files\n"
"      --files[=FILE]  read filenames to process from FILE; if FILE is\n"
"                      omitted, filenames are read from the standard input;\n"
"                      filenames must be terminated with the newline character\n"
"      --files0[=FILE] like --files but use the null character as terminator"
msgstr ""
"      --no-sparse     不在解壓縮時建立疏鬆檔案\n"
"  -S, --suffix=.SUF   在壓縮檔加上後綴「.SUF」\n"
"      --files[=檔案]  讀取檔案名稱以處理 <檔案>；如省略 <檔案>\n"
"                      則從標準輸入讀取檔名；檔名必須以換行字元作為結尾\n"
"      --files0[=檔案] 類似 --files 但是以 null 空字元作結尾"

#: src/xz/message.c
msgid ""
"\n"
" Basic file format and compression options:\n"
msgstr ""
"\n"
" 基本檔案格式與壓縮選項：\n"

#: src/xz/message.c
msgid ""
"  -F, --format=FMT    file format to encode or decode; possible values are\n"
"                      `auto' (default), `xz', `lzma', `lzip', and `raw'\n"
"  -C, --check=CHECK   integrity check type: `none' (use with caution),\n"
"                      `crc32', `crc64' (default), or `sha256'"
msgstr ""
"  -F, --format=格式   用於編碼或解碼的檔案格式；可用的值有：\n"
"                      “auto”（預設）、“xz”、“lzma”、“lzip” 及 “raw”\n"
"  -C, --check=檢查碼   完整性檢查類型：“none”（謹慎使用）、“crc32”、\n"
"                      “crc64”（預設值）或“sha256”"

#: src/xz/message.c
msgid "      --ignore-check  don't verify the integrity check when decompressing"
msgstr "      --ignore-check  不在解壓縮時驗證完整性"

#: src/xz/message.c
msgid ""
"  -0 ... -9           compression preset; default is 6; take compressor *and*\n"
"                      decompressor memory usage into account before using 7-9!"
msgstr ""
"  -0 ... -9           壓縮設定檔；預設值為 6；使用 7-9 前請考慮\n"
"                      壓縮和解壓縮所使用的記憶體！"

#: src/xz/message.c
msgid ""
"  -e, --extreme       try to improve compression ratio by using more CPU time;\n"
"                      does not affect decompressor memory requirements"
msgstr ""
"  -e, --extreme       使用更多 CPU 時間以嘗試改善壓縮比；\n"
"                      不影響解壓縮器的記憶體需求"

#: src/xz/message.c
msgid ""
"  -T, --threads=NUM   use at most NUM threads; the default is 1; set to 0\n"
"                      to use as many threads as there are processor cores"
msgstr ""
"  -T, --threads=NUM   使用最多 NUM 個執行緒；預設為 1；設成 0 則使用所有的\n"
"                      處理機核心"

#: src/xz/message.c
msgid ""
"      --block-size=SIZE\n"
"                      start a new .xz block after every SIZE bytes of input;\n"
"                      use this to set the block size for threaded compression"
msgstr ""
"      --block-size=SIZE\n"
"                      輸入每 SIZE 位元組後，開始一個新 .xz 區塊；\n"
"                      使用此功能以設定多執行緒壓縮的區塊大小"

#: src/xz/message.c
msgid ""
"      --block-list=SIZES\n"
"                      start a new .xz block after the given comma-separated\n"
"                      intervals of uncompressed data"
msgstr ""
"      --block-list=SIZES\n"
"                      在指定以逗號隔開的未壓縮資料間隔之後\n"
"                      開始新的 .xz 區塊"

#: src/xz/message.c
msgid ""
"      --flush-timeout=TIMEOUT\n"
"                      when compressing, if more than TIMEOUT milliseconds has\n"
"                      passed since the previous flush and reading more input\n"
"                      would block, all pending data is flushed out"
msgstr ""
"      --flush-timeout=TIMEOUT\n"
"                      壓縮時，倘若繼上次排清 (flush) 已經超過 TIMEOUT 毫秒\n"
"                      而且讀入更多輸入會阻塞，則所有待排清的資料都將排清"

#: src/xz/message.c
#, no-c-format
msgid ""
"      --memlimit-compress=LIMIT\n"
"      --memlimit-decompress=LIMIT\n"
"      --memlimit-mt-decompress=LIMIT\n"
"  -M, --memlimit=LIMIT\n"
"                      set memory usage limit for compression, decompression,\n"
"                      threaded decompression, or all of these; LIMIT is in\n"
"                      bytes, % of RAM, or 0 for defaults"
msgstr ""
"      --memlimit-compress=LIMIT\n"
"      --memlimit-decompress=LIMIT\n"
"      --memlimit-mt-decompress=LIMIT\n"
"  -M, --memlimit=LIMIT\n"
"                      限制壓縮、解壓縮、多執行緒解壓縮或以上全部的記憶體\n"
"                      用量上限。LIMIT 得是位元組、記憶體百分比 (%)，或 0\n"
"                      (預設值)"

#: src/xz/message.c
msgid ""
"      --no-adjust     if compression settings exceed the memory usage limit,\n"
"                      give an error instead of adjusting the settings downwards"
msgstr ""
"      --no-adjust     若壓縮設定超過記憶體用量上限，請給出\n"
"                      錯誤而非下調設定"

#: src/xz/message.c
msgid ""
"\n"
" Custom filter chain for compression (alternative for using presets):"
msgstr ""
"\n"
" 自訂壓縮篩選鏈（使用設定檔時選用）："

#: src/xz/message.c
msgid ""
"\n"
"  --lzma1[=OPTS]      LZMA1 or LZMA2; OPTS is a comma-separated list of zero or\n"
"  --lzma2[=OPTS]      more of the following options (valid values; default):\n"
"                        preset=PRE reset options to a preset (0-9[e])\n"
"                        dict=NUM   dictionary size (4KiB - 1536MiB; 8MiB)\n"
"                        lc=NUM     number of literal context bits (0-4; 3)\n"
"                        lp=NUM     number of literal position bits (0-4; 0)\n"
"                        pb=NUM     number of position bits (0-4; 2)\n"
"                        mode=MODE  compression mode (fast, normal; normal)\n"
"                        nice=NUM   nice length of a match (2-273; 64)\n"
"                        mf=NAME    match finder (hc3, hc4, bt2, bt3, bt4; bt4)\n"
"                        depth=NUM  maximum search depth; 0=automatic (default)"
msgstr ""
"\n"
"  --lzma1[=操作]      LZMA1 或 LZMA2；<操作> 是以下選項中的 0 個或以上選項\n"
"  --lzma2[=操作]      （有效值; 預設）：\n"
"                        preset=PRE 將選項重設至某設定檔的選項 (0-9[e])\n"
"                        dict=NUM   字典大小 (4KiB - 1536MiB; 8MiB)\n"
"                        lc=NUM     文字內文位元數 (0-4; 3)\n"
"                        lp=NUM     文字位置位元數 (0-4; 0)\n"
"                        pb=NUM     位置位元數    (0-4; 2)\n"
"                        mode=模式  壓縮模式 (fast, normal; normal)\n"
"                        nice=NUM   符合項目的 nice 長度 (2-273; 64)\n"
"                        mf=名稱    尋找符合搜尋器 (hc3, hc4, bt2, bt3, bt4; bt4)\n"
"                        depth=NUM  最大搜尋深度；0=自動（預設）"

#: src/xz/message.c
msgid ""
"\n"
"  --x86[=OPTS]        x86 BCJ filter (32-bit and 64-bit)\n"
"  --arm[=OPTS]        ARM BCJ filter\n"
"  --armthumb[=OPTS]   ARM-Thumb BCJ filter\n"
"  --arm64[=OPTS]      ARM64 BCJ filter\n"
"  --powerpc[=OPTS]    PowerPC BCJ filter (big endian only)\n"
"  --ia64[=OPTS]       IA-64 (Itanium) BCJ filter\n"
"  --sparc[=OPTS]      SPARC BCJ filter\n"
"                      Valid OPTS for all BCJ filters:\n"
"                        start=NUM  start offset for conversions (default=0)"
msgstr ""
"\n"
"  --x86[=OPTS]        x86 BCJ 篩選器 (32 位元和 64 位元)\n"
"  --arm[=OPTS]        ARM BCJ 篩選器\n"
"  --armthumb[=OPTS]   ARM-Thumb BCJ 篩選器\n"
"  --arm64[=OPTS]      ARM64 BCJ 篩選器\n"
"  --powerpc[=OPTS]    PowerPC BCJ 篩選器（僅大端序）\n"
"  --ia64[=OPTS]       IA-64 (Itanium) BCJ 篩選器\n"
"  --sparc[=OPTS]      SPARC BCJ 篩選器\n"
"                      所有 BCJ 篩選器可用的 OPTS：\n"
"                        start=NUM  轉換起始位移（預設值=0）"

#: src/xz/message.c
msgid ""
"\n"
"  --delta[=OPTS]      Delta filter; valid OPTS (valid values; default):\n"
"                        dist=NUM   distance between bytes being subtracted\n"
"                                   from each other (1-256; 1)"
msgstr ""
"\n"
"  --delta[=OPTS]      增量篩選器 (有效值; 預設值)：\n"
"                        dist=NUM   相減的位元組之間的距離\n"
"                                   (1-256; 1)"

#: src/xz/message.c
msgid ""
"\n"
" Other options:\n"
msgstr ""
"\n"
" 其他選項：\n"

#: src/xz/message.c
msgid ""
"  -q, --quiet         suppress warnings; specify twice to suppress errors too\n"
"  -v, --verbose       be verbose; specify twice for even more verbose"
msgstr ""
"  -q, --quiet         隱藏警告訊息；指定兩次也一併隱藏錯誤訊息\n"
"  -v, --verbose       輸出較詳細內容；指定兩次更詳細輸出"

#: src/xz/message.c
msgid "  -Q, --no-warn       make warnings not affect the exit status"
msgstr "  -Q, --no-warn       即使有警告，退出狀態碼仍不變"

#: src/xz/message.c
msgid "      --robot         use machine-parsable messages (useful for scripts)"
msgstr "      --robot         使用機器可解析訊息（適合用於指令稿）"

#: src/xz/message.c
msgid ""
"      --info-memory   display the total amount of RAM and the currently active\n"
"                      memory usage limits, and exit"
msgstr "      --info-memory   顯示記憶體總量和使用中的記憶體用量限制後退出"

#: src/xz/message.c
msgid ""
"  -h, --help          display the short help (lists only the basic options)\n"
"  -H, --long-help     display this long help and exit"
msgstr ""
"  -h, --help          顯示較短說明（僅列出基本選項）\n"
"  -H, --long-help     顯示較長說明後退出"

#: src/xz/message.c
msgid ""
"  -h, --help          display this short help and exit\n"
"  -H, --long-help     display the long help (lists also the advanced options)"
msgstr ""
"  -h, --help          顯示較短說明後退出\n"
"  -H, --long-help     顯示較長說明（也列出進階選項）"

#: src/xz/message.c
msgid "  -V, --version       display the version number and exit"
msgstr "  -V, --version       顯示版本號碼後退出"

#: src/xz/message.c
msgid ""
"\n"
"With no FILE, or when FILE is -, read standard input.\n"
msgstr ""
"\n"
"如果未指定 <檔案>，或 <檔案> 是 -，則從標準輸入讀取。\n"

#. TRANSLATORS: This message indicates the bug reporting address
#. for this package. Please add _another line_ saying
#. "Report translation bugs to <...>\n" with the email or WWW
#. address for translation bugs. Thanks.
#: src/xz/message.c
#, c-format
msgid "Report bugs to <%s> (in English or Finnish).\n"
msgstr "請回報臭蟲至 <%s>（使用英文或芬蘭語）。\n"

#: src/xz/message.c
#, c-format
msgid "%s home page: <%s>\n"
msgstr "%s 首頁：<%s>\n"

#: src/xz/message.c
msgid "THIS IS A DEVELOPMENT VERSION NOT INTENDED FOR PRODUCTION USE."
msgstr "此為開發版本，不打算在生產環境使用。"

#: src/xz/options.c
#, c-format
msgid "%s: Options must be `name=value' pairs separated with commas"
msgstr "%s：選項形式必須為以逗號分隔的「name=value」值對"

#: src/xz/options.c
#, c-format
msgid "%s: Invalid option name"
msgstr "%s：選項名稱無效"

#: src/xz/options.c
#, c-format
msgid "%s: Invalid option value"
msgstr "%s：選項值無效"

#: src/xz/options.c
#, c-format
msgid "Unsupported LZMA1/LZMA2 preset: %s"
msgstr "不支援的 LZMA1/LZMA2 設定檔：%s"

#: src/xz/options.c
msgid "The sum of lc and lp must not exceed 4"
msgstr "lc 和 lp 的總和不能超過 4"

#: src/xz/suffix.c
#, c-format
msgid "%s: Filename has an unknown suffix, skipping"
msgstr "%s：檔名有未知後綴，跳過"

#: src/xz/suffix.c
#, c-format
msgid "%s: File already has `%s' suffix, skipping"
msgstr "%s：檔案已有「%s」後綴，跳過"

#: src/xz/suffix.c
#, c-format
msgid "%s: Invalid filename suffix"
msgstr "%s：檔名後綴無效"

#: src/xz/util.c
#, c-format
msgid "%s: Value is not a non-negative decimal integer"
msgstr "%s：數值不是非負數十進位整數"

#: src/xz/util.c
#, c-format
msgid "%s: Invalid multiplier suffix"
msgstr "%s：乘數後綴無效"

#: src/xz/util.c
msgid "Valid suffixes are `KiB' (2^10), `MiB' (2^20), and `GiB' (2^30)."
msgstr "有效的後綴有「KiB」(2^10)、「MiB」(2^20) 及「GiB」(2^30)。"

#: src/xz/util.c
#, c-format
msgid "Value of the option `%s' must be in the range [%<PRIu64>, %<PRIu64>]"
msgstr "選項「%s」的數值必須在 [%<PRIu64>, %<PRIu64>] 範圍內"

#: src/xz/util.c
msgid "Compressed data cannot be read from a terminal"
msgstr "不能從終端機讀入已壓縮資料"

#: src/xz/util.c
msgid "Compressed data cannot be written to a terminal"
msgstr "不能將已壓縮資料寫入終端機"

#: src/common/tuklib_exit.c
msgid "Writing to standard output failed"
msgstr "寫入標準輸出失敗"

#: src/common/tuklib_exit.c
msgid "Unknown error"
msgstr "未知錯誤"

#~ msgid "Sandbox is disabled due to incompatible command line arguments"
#~ msgstr "由於指定不相容的指令列參數，已停用沙盒"

#~ msgid "Sandbox was successfully enabled"
#~ msgstr "已成功啟用沙盒"

#~ msgid "Memory usage limit for compression:    "
#~ msgstr "壓縮記憶體限制：       "

#~ msgid "  Streams:            %s\n"
#~ msgstr "  串流：　　　　　　　　　%s\n"

#~ msgid "  Blocks:             %s\n"
#~ msgstr "  區塊：　　　　　　　　　%s\n"

#~ msgid "  Ratio:              %s\n"
#~ msgstr "  壓縮比：　　　　　　　　%s\n"

#~ msgid "  Check:              %s\n"
#~ msgstr "  檢驗碼：　　　　　　　　%s\n"

# 下方的文字因排版有一些障礙，因此暫時不理他。
#~ msgid ""
#~ "  Streams:\n"
#~ "    Stream    Blocks      CompOffset    UncompOffset        CompSize      UncompSize  Ratio  Check      Padding"
#~ msgstr ""
#~ "  串流：\n"
#~ "    Stream    Blocks      CompOffset    UncompOffset        CompSize      UncompSize  Ratio  Check      Padding"

# 下方的文字因排版有一些障礙，因此暫時不理他。
#~ msgid ""
#~ "  Blocks:\n"
#~ "    Stream     Block      CompOffset    UncompOffset       TotalSize      UncompSize  Ratio  Check"
#~ msgstr ""
#~ "  區塊：\n"
#~ "    Stream     Block      CompOffset    UncompOffset       TotalSize      UncompSize  Ratio  Check"

# 下方的文字因排版有一些障礙，因此暫時不理他。
#~ msgid "      CheckVal %*s Header  Flags        CompSize    MemUsage  Filters"
#~ msgstr "      CheckVal %*s Header  Flags        CompSize    MemUsage  Filters"

#~ msgid "The selected match finder requires at least nice=%<PRIu32>"
#~ msgstr "選取的符合搜尋工具需要至少 nice=%<PRIu32>"