xz/po/ko.po

# SPDX-License-Identifier: 0BSD
# Korean translation for the xz.
# This file is published under the BSD Zero Clause License.
# Seong-ho Cho <darkcircle.0426@gmail.com>, 2019, 2022, 2023, 2024, 2025.
#
msgid ""
msgstr ""
"Project-Id-Version: xz 5.7.1-dev1\n"
"Report-Msgid-Bugs-To: xz@tukaani.org\n"
"POT-Creation-Date: 2025-01-23 12:05+0200\n"
"PO-Revision-Date: 2025-01-24 23:22+0900\n"
"Last-Translator: Seong-ho Cho <darkcircle.0426@gmail.com>\n"
"Language-Team: Korean <translation-team-ko@googlegroups.com>\n"
"Language: ko\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
"X-Bugs: Report translation errors to the Language-Team address.\n"
"X-Generator: Poedit 3.5\n"

#: src/xz/args.c
#, c-format
msgid "%s: Invalid argument to --block-list"
msgstr "%s: --block-list의 인자값이 잘못됨"

#: src/xz/args.c
#, c-format
msgid "%s: Too many arguments to --block-list"
msgstr "%s: --block-list 인자 갯수가 너무 많음"

#: src/xz/args.c
#, c-format
msgid "In --block-list, block size is missing after filter chain number '%c:'"
msgstr "--block-list에서 필터 체인 번호 '%c:' 다음 블록 크기가 빠졌습니다."

#: src/xz/args.c
msgid "0 can only be used as the last element in --block-list"
msgstr "0 값은 --block-list의 마지막 원소로만 사용할 수 있습니다"

#: src/xz/args.c
#, c-format
msgid "%s: Unknown file format type"
msgstr "%s: 알 수 없는 파일 형식"

#: src/xz/args.c
#, c-format
msgid "%s: Unsupported integrity check type"
msgstr "%s: 지원하지 않는 무결성 검사 형식"

#: src/xz/args.c
msgid "Only one file can be specified with '--files' or '--files0'."
msgstr "'--files' 또는 '--files0' 옵션에는 하나의 파일만 지정할 수 있습니다."

#. TRANSLATORS: This is a translatable
#. string because French needs a space
#. before the colon ("%s : %s").
#: src/xz/args.c src/xz/coder.c src/xz/file_io.c src/xz/list.c src/xz/options.c
#: src/xz/util.c
#, c-format
msgid "%s: %s"
msgstr "%s: %s"

#: src/xz/args.c
#, c-format
msgid "The environment variable %s contains too many arguments"
msgstr "%s 환경 변수에 너무 많은 인자 값이 들어있습니다"

#: src/xz/args.c
msgid "Compression support was disabled at build time"
msgstr "빌드 시점에 압축 기능을 비활성했습니다"

#: src/xz/args.c
msgid "Decompression support was disabled at build time"
msgstr "빌드 시점에 압축 해제 기능을 비활성했습니다"

#: src/xz/args.c
msgid "Compression of lzip files (.lz) is not supported"
msgstr "lzip 파일 (.lz) 압축은 지원하지 않습니다"

#: src/xz/args.c
msgid "--block-list is ignored unless compressing to the .xz format"
msgstr ".xz 형식으로 압축하지 않으면 --block-list 옵션은 무시합니다"

#: src/xz/args.c
msgid "With --format=raw, --suffix=.SUF is required unless writing to stdout"
msgstr "표준 출력으로 기록하지 않는 한 --format=raw, --suffix=.<확장자> 옵션이 필요합니다"

#: src/xz/coder.c
msgid "Maximum number of filters is four"
msgstr "최대 필터 갯수는 4 입니다"

#: src/xz/coder.c
#, c-format
msgid "Error in --filters%s=FILTERS option:"
msgstr "--filters%s=<필터> 옵션 오류:"

#: src/xz/coder.c
msgid "Memory usage limit is too low for the given filter setup."
msgstr "주어진 필터 설정으로는 메모리 사용 제한 값이 너무 적습니다."

#: src/xz/coder.c
#, c-format
msgid "filter chain %u used by --block-list but not specified with --filters%u="
msgstr "--block-lisk에서 필터 체인 %u번을 사용하고 있지만 --filters%u= 옵션으로 지정하지 않았습니다"

#: src/xz/coder.c
msgid "Using a preset in raw mode is discouraged."
msgstr "RAW 모드에서의 프리셋 사용은 권장하지 않습니다."

#: src/xz/coder.c
msgid "The exact options of the presets may vary between software versions."
msgstr "프리셋의 정확한 옵션 값은 프로그램 버전에 따라 다릅니다."

#: src/xz/coder.c
msgid "The .lzma format supports only the LZMA1 filter"
msgstr ".lzma 형식은 LZMA1 필터만 지원합니다"

#: src/xz/coder.c
msgid "LZMA1 cannot be used with the .xz format"
msgstr ".xz 형식에는 LZMA1 필터를 사용할 수 없습니다"

#: src/xz/coder.c
#, c-format
msgid "Filter chain %u is incompatible with --flush-timeout"
msgstr "필터 체인 %u번이 --flush-timeout 옵션과 맞지 않습니다"

#: src/xz/coder.c
msgid "Switching to single-threaded mode due to --flush-timeout"
msgstr "--flush-timeout 옵션을 지정하였으므로 단일 스레드 모드로 전환합니다"

#: src/xz/coder.c
#, c-format
msgid "Unsupported options in filter chain %u"
msgstr "필터 체인 %u번에서 지원하지 않는 옵션"

#: src/xz/coder.c
#, c-format
msgid "Using up to %<PRIu32> threads."
msgstr "최대 스레드 %<PRIu32>개를 사용합니다."

#: src/xz/coder.c
msgid "Unsupported filter chain or filter options"
msgstr "지원하지 않는 필터 체인 또는 필터 옵션"

#: src/xz/coder.c
#, c-format
msgid "Decompression will need %s MiB of memory."
msgstr "압축 해제시 %s MiB 메모리 용량이 필요합니다."

#: src/xz/coder.c
#, c-format
msgid "Reduced the number of threads from %s to %s to not exceed the memory usage limit of %s MiB"
msgstr "메모리 사용량 %s MiB 제한을 넘지 않으려 스레드 수를 %s(에)서 %s(으)로 줄였습니다"

#: src/xz/coder.c
#, c-format
msgid "Reduced the number of threads from %s to one. The automatic memory usage limit of %s MiB is still being exceeded. %s MiB of memory is required. Continuing anyway."
msgstr "스레드 수가 %s(에)서 하나로 줄었습니다. 메모리 사용 자동 제한량 %sMiB를 여전히 초과합니다. 메모리 공간 %sMiB가 필요합니다. 어쨌든 계속합니다."

#: src/xz/coder.c
#, c-format
msgid "Switching to single-threaded mode to not exceed the memory usage limit of %s MiB"
msgstr "메모리 사용 제한량 %sMiB를 넘지 않으려 단일 스레드 모드로 전환합니다"

#: src/xz/coder.c
#, c-format
msgid "Adjusted LZMA%c dictionary size from %s MiB to %s MiB to not exceed the memory usage limit of %s MiB"
msgstr "메모리 사용 제한량 %4$sMiB를 넘지 않으려 %2$sMiB에서 %3$sMiB로 LZMA%1$c 딕셔너리 크기를 조정했습니다"

#: src/xz/coder.c
#, c-format
msgid "Adjusted LZMA%c dictionary size for --filters%u from %s MiB to %s MiB to not exceed the memory usage limit of %s MiB"
msgstr "메모리 사용 제한량 %5$sMiB를 넘지 않으려 %3$sMiB에서 %4$sMiB로 --filters%2$u의 LZMA%1$c 딕셔너리 크기를 조정했습니다"

#: src/xz/coder.c
#, c-format
msgid "Error changing to filter chain %u: %s"
msgstr "필터 체인 %u번 전환 오류: %s"

#: src/xz/file_io.c
#, c-format
msgid "Error creating a pipe: %s"
msgstr "파이프 생성 오류: %s"

#: src/xz/file_io.c
#, c-format
msgid "%s: poll() failed: %s"
msgstr "%s: poll() 실패: %s"

#. TRANSLATORS: When compression or decompression finishes,
#. and xz is going to remove the source file, xz first checks
#. if the source file still exists, and if it does, does its
#. device and inode numbers match what xz saw when it opened
#. the source file. If these checks fail, this message is
#. shown, %s being the filename, and the file is not deleted.
#. The check for device and inode numbers is there, because
#. it is possible that the user has put a new file in place
#. of the original file, and in that case it obviously
#. shouldn't be removed.
#: src/xz/file_io.c
#, c-format
msgid "%s: File seems to have been moved, not removing"
msgstr "%s: 파일을 이동한 것 같음, 제거 안함"

#: src/xz/file_io.c
#, c-format
msgid "%s: Cannot remove: %s"
msgstr "%s: 제거할 수 없음: %s"

#: src/xz/file_io.c
#, c-format
msgid "%s: Cannot set the file owner: %s"
msgstr "%s: 파일 소유자를 설정할 수 없음: %s"

#: src/xz/file_io.c
#, c-format
msgid "%s: Cannot set the file group: %s"
msgstr "%s: 파일 소유 그룹을 설정할 수 없음: %s"

#: src/xz/file_io.c
#, c-format
msgid "%s: Cannot set the file permissions: %s"
msgstr "%s: 파일 권한을 설정할 수 없음: %s"

#: src/xz/file_io.c
#, c-format
msgid "%s: Synchronizing the file failed: %s"
msgstr "%s: 파일 동기화 실패: %s"

#: src/xz/file_io.c
#, c-format
msgid "%s: Synchronizing the directory of the file failed: %s"
msgstr "%s: 파일의 디렉터리 동기화 실패: %s"

#: src/xz/file_io.c
#, c-format
msgid "Error getting the file status flags from standard input: %s"
msgstr "표준 입력에서 파일 상태 플래그 가져오기 오류: %s"

#: src/xz/file_io.c
#, c-format
msgid "%s: Is a symbolic link, skipping"
msgstr "%s: 심볼릭 링크, 건너뜀"

#: src/xz/file_io.c
#, c-format
msgid "%s: Is a directory, skipping"
msgstr "%s: 디렉터리입니다, 건너뜀"

#: src/xz/file_io.c
#, c-format
msgid "%s: Not a regular file, skipping"
msgstr "%s: 일반 파일 아님, 건너뜀"

#: src/xz/file_io.c
#, c-format
msgid "%s: File has setuid or setgid bit set, skipping"
msgstr "%s: setuid 또는 setgid 비트 설정 있음, 건너뜀"

#: src/xz/file_io.c
#, c-format
msgid "%s: File has sticky bit set, skipping"
msgstr "%s: 끈적이 비트 설정이 있는 파일, 건너뜀"

#: src/xz/file_io.c
#, c-format
msgid "%s: Input file has more than one hard link, skipping"
msgstr "%s: 입력 파일에 하나 이상의 하드링크가 있습니다, 건너뜀"

#: src/xz/file_io.c
msgid "Empty filename, skipping"
msgstr "파일 이름 없음, 건너뜀"

#: src/xz/file_io.c
#, c-format
msgid "Error restoring the status flags to standard input: %s"
msgstr "표준 입력으로의 상태 플래그 복원 오류: %s"

#: src/xz/file_io.c
#, c-format
msgid "Error getting the file status flags from standard output: %s"
msgstr "표준 출력에서 파일 상태 플래그 가져오기 오류: %s"

#: src/xz/file_io.c
#, c-format
msgid "%s: Opening the directory failed: %s"
msgstr "%s: 디렉터리 열기 실패: %s"

#: src/xz/file_io.c
#, c-format
msgid "%s: Destination is not a regular file"
msgstr "%s: 대상이 일반 파일이 아닙니다"

#: src/xz/file_io.c
#, c-format
msgid "Error restoring the O_APPEND flag to standard output: %s"
msgstr "표준 출력으로의 O_APPEND 플래그 복원 오류: %s"

#: src/xz/file_io.c
#, c-format
msgid "%s: Closing the file failed: %s"
msgstr "%s: 파일 닫기 실패: %s"

#: src/xz/file_io.c
#, c-format
msgid "%s: Seeking failed when trying to create a sparse file: %s"
msgstr "%s: 분할 파일 생성 시도시 탐색 실패: %s"

#: src/xz/file_io.c
#, c-format
msgid "%s: Read error: %s"
msgstr "%s: 읽기 오류: %s"

#: src/xz/file_io.c
#, c-format
msgid "%s: Error seeking the file: %s"
msgstr "%s: 파일 탐색 오류: %s"

#: src/xz/file_io.c
#, c-format
msgid "%s: Unexpected end of file"
msgstr "%s: 예상치 못한 파일의 끝"

#: src/xz/file_io.c
#, c-format
msgid "%s: Write error: %s"
msgstr "%s: 쓰기 오류: %s"

#: src/xz/hardware.c
msgid "Disabled"
msgstr "사용 안함"

#: src/xz/hardware.c
msgid "Amount of physical memory (RAM):"
msgstr "물리 메모리 양 (RAM):"

#: src/xz/hardware.c
msgid "Number of processor threads:"
msgstr "프로세서 스레드 수:"

#: src/xz/hardware.c
msgid "Compression:"
msgstr "압축:"

#: src/xz/hardware.c
msgid "Decompression:"
msgstr "압축해제:"

#: src/xz/hardware.c
msgid "Multi-threaded decompression:"
msgstr "멀티 스레드 압축 해제:"

#: src/xz/hardware.c
msgid "Default for -T0:"
msgstr "-T0 기본값:"

#: src/xz/hardware.c
msgid "Hardware information:"
msgstr "하드웨어 정보:"

#: src/xz/hardware.c
msgid "Memory usage limits:"
msgstr "메모리 사용 제한량:"

#: src/xz/list.c
msgid "Streams:"
msgstr "스트림:"

#: src/xz/list.c
msgid "Blocks:"
msgstr "블록 수:"

#: src/xz/list.c
msgid "Compressed size:"
msgstr "압축 용량:"

#: src/xz/list.c
msgid "Uncompressed size:"
msgstr "압축해제 용량:"

#: src/xz/list.c
msgid "Ratio:"
msgstr "압축율:"

#: src/xz/list.c
msgid "Check:"
msgstr "검사:"

#: src/xz/list.c
msgid "Stream Padding:"
msgstr "스트림 패딩:"

#: src/xz/list.c
msgid "Memory needed:"
msgstr "요구 메모리:"

#: src/xz/list.c
msgid "Sizes in headers:"
msgstr "헤더 길이:"

#: src/xz/list.c
msgid "Number of files:"
msgstr "파일 갯수:"

#: src/xz/list.c
msgid "Stream"
msgstr "스트림"

#: src/xz/list.c
msgid "Block"
msgstr "블록"

#: src/xz/list.c
msgid "Blocks"
msgstr "블록"

#: src/xz/list.c
msgid "CompOffset"
msgstr "압축오프셋"

#: src/xz/list.c
msgid "UncompOffset"
msgstr "압축해제오프셋"

#: src/xz/list.c
msgid "CompSize"
msgstr "압축크기"

#: src/xz/list.c
msgid "UncompSize"
msgstr "압축해제크기"

#: src/xz/list.c
msgid "TotalSize"
msgstr "총크기"

#: src/xz/list.c
msgid "Ratio"
msgstr "압축율"

#: src/xz/list.c
msgid "Check"
msgstr "검사"

#: src/xz/list.c
msgid "CheckVal"
msgstr "검사값"

#: src/xz/list.c
msgid "Padding"
msgstr "패딩"

#: src/xz/list.c
msgid "Header"
msgstr "헤더"

#: src/xz/list.c
msgid "Flags"
msgstr "플래그"

#: src/xz/list.c
msgid "MemUsage"
msgstr "메모리사용"

#: src/xz/list.c
msgid "Filters"
msgstr "필터"

#. TRANSLATORS: Indicates that there is no integrity check.
#. This string is used in tables. In older xz version this
#. string was limited to ten columns in a fixed-width font, but
#. nowadays there is no strict length restriction anymore.
#: src/xz/list.c
msgid "None"
msgstr "없음"

#. TRANSLATORS: Indicates that integrity check name is not known,
#. but the Check ID is known (here 2). In older xz version these
#. strings were limited to ten columns in a fixed-width font, but
#. nowadays there is no strict length restriction anymore.
#: src/xz/list.c
msgid "Unknown-2"
msgstr "알 수 없음-2"

#: src/xz/list.c
msgid "Unknown-3"
msgstr "알 수 없음-3"

#: src/xz/list.c
msgid "Unknown-5"
msgstr "알 수 없음-5"

#: src/xz/list.c
msgid "Unknown-6"
msgstr "알 수 없음-6"

#: src/xz/list.c
msgid "Unknown-7"
msgstr "알 수 없음-7"

#: src/xz/list.c
msgid "Unknown-8"
msgstr "알 수 없음-8"

#: src/xz/list.c
msgid "Unknown-9"
msgstr "알 수 없음-9"

#: src/xz/list.c
msgid "Unknown-11"
msgstr "알 수 없음-11"

#: src/xz/list.c
msgid "Unknown-12"
msgstr "알 수 없음-12"

#: src/xz/list.c
msgid "Unknown-13"
msgstr "알 수 없음-13"

#: src/xz/list.c
msgid "Unknown-14"
msgstr "알 수 없음-14"

#: src/xz/list.c
msgid "Unknown-15"
msgstr "알 수 없음-15"

#: src/xz/list.c
#, c-format
msgid "%s: File is empty"
msgstr "%s: 파일 내용 없음"

#: src/xz/list.c
#, c-format
msgid "%s: Too small to be a valid .xz file"
msgstr "%s: 유효한 .xz 파일로 보기에는 너무 작습니다"

#. TRANSLATORS: These are column headings. From Strms (Streams)
#. to Ratio, the columns are right aligned. Check and Filename
#. are left aligned. If you need longer words, it's OK to
#. use two lines here. Test with "xz -l foo.xz".
#: src/xz/list.c
msgid "Strms  Blocks   Compressed Uncompressed  Ratio  Check   Filename"
msgstr "스트림   블록         압축     압축해제 압축율  검사    파일 이름"

#: src/xz/list.c
msgid "Yes"
msgstr "예"

# 주: 아니오가 아니라 아니요가 맞는 표현
#: src/xz/list.c
msgid "No"
msgstr "아니요"

#: src/xz/list.c
msgid "Minimum XZ Utils version:"
msgstr "최소 XZ 유틸리티 버전:"

#. TRANSLATORS: %s is an integer. Only the plural form of this
#. message is used (e.g. "2 files"). Test with "xz -l foo.xz bar.xz".
#: src/xz/list.c
#, c-format
msgid "%s file\n"
msgid_plural "%s files\n"
msgstr[0] "파일 %s개\n"

#: src/xz/list.c
msgid "Totals:"
msgstr "총:"

#: src/xz/list.c
msgid "--list works only on .xz files (--format=xz or --format=auto)"
msgstr "--list 옵션은 .xz 파일에만 동작합니다(--format=xz 또는 --format=auto)"

#: src/xz/list.c
msgid "Try 'lzmainfo' with .lzma files."
msgstr "'lzmainfo' 명령에 .lzma 파일 이름을 붙여 실행해보십시오."

#: src/xz/list.c
msgid "--list does not support reading from standard input"
msgstr "--list 옵션은 표준 입력 읽기를 지원하지 않습니다"

#: src/xz/main.c
#, c-format
msgid "%s: Error reading filenames: %s"
msgstr "%s: 파일 이름 읽기 오류: %s"

#: src/xz/main.c
#, c-format
msgid "%s: Unexpected end of input when reading filenames"
msgstr "%s: 파일 이름 읽는 중 예상치 못한 입력 끝"

#: src/xz/main.c
#, c-format
msgid "%s: Null character found when reading filenames; maybe you meant to use '--files0' instead of '--files'?"
msgstr "%s: 파일 이름을 읽는 도중 NULL 문자 발견. '--files' 옵션 대신 '--files0' 옵션을 사용하시려는게 아닙니까?"

#: src/xz/main.c
msgid "Compression and decompression with --robot are not supported yet."
msgstr "아직 압축 동작과 압축 해제 동작에 --robot 옵션을 지원하지 않습니다."

#: src/xz/main.c
msgid "Cannot read data from standard input when reading filenames from standard input"
msgstr "표준 출력에서 파일 이름을 읽을 때 표준 입력에서 데이터를 읽을 수 없습니다"

#. TRANSLATORS: This is the program name in the beginning
#. of the line in messages. Usually it becomes "xz: ".
#. This is a translatable string because French needs
#. a space before a colon.
#: src/xz/message.c
#, c-format
msgid "%s: "
msgstr "%s: "

#: src/xz/message.c src/lzmainfo/lzmainfo.c
msgid "Internal error (bug)"
msgstr "내부 오류 (버그)"

#: src/xz/message.c
msgid "Cannot establish signal handlers"
msgstr "시그널 처리자를 준비할 수 없습니다"

#: src/xz/message.c
msgid "No integrity check; not verifying file integrity"
msgstr "무결성 검사 안함. 파일 무결성을 검증하지 않습니다"

#: src/xz/message.c
msgid "Unsupported type of integrity check; not verifying file integrity"
msgstr "지원하지 않는 무결성 검사 형식. 파일 무결성을 검증하지 않습니다"

#: src/xz/message.c
msgid "Memory usage limit reached"
msgstr "메모리 사용량 한계에 도달했습니다"

#: src/xz/message.c
msgid "File format not recognized"
msgstr "파일 형식을 인식할 수 없음"

#: src/xz/message.c
msgid "Unsupported options"
msgstr "지원하지 않는 옵션"

#: src/xz/message.c
msgid "Compressed data is corrupt"
msgstr "압축 데이터 깨짐"

#: src/xz/message.c
msgid "Unexpected end of input"
msgstr "예상치 못한 입력 끝"

#: src/xz/message.c
#, c-format
msgid "%s MiB of memory is required. The limiter is disabled."
msgstr "%s MiB 메모리 용량이 필요합니다. 제한을 비활성합니다."

#: src/xz/message.c
#, c-format
msgid "%s MiB of memory is required. The limit is %s."
msgstr "%s MiB 메모리 용량이 필요합니다. 제한 용량은 %s 입니다."

#: src/xz/message.c
#, c-format
msgid "%s: Filter chain: %s\n"
msgstr "%s: 필터 체인: %s\n"

#: src/xz/message.c
#, c-format
msgid "Try '%s --help' for more information."
msgstr "자세한 사용법은 '%s --help'를 입력하십시오."

#: src/xz/message.c
#, c-format
msgid "Error printing the help text (error code %d)"
msgstr "도움말 텍스트 출력 오류(오류 코드 %d)"

#: src/xz/message.c
#, c-format
msgid "Usage: %s [OPTION]... [FILE]...\n"
msgstr "사용법: %s [옵션]... [파일]...\n"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "Compress or decompress FILEs in the .xz format."
msgstr ".xz 형식의 <파일>로 압축하거나 압축을 해제합니다."

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "Mandatory arguments to long options are mandatory for short options too."
msgstr "긴 옵션 버전의 필수 인자는 짧은 옵션에도 해당합니다."

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "Operation mode:"
msgstr "동작 방식:"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "force compression"
msgstr "강제 압축"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "force decompression"
msgstr "강제 압축 해제"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "test compressed file integrity"
msgstr "압축 파일 무결성을 시험합니다"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "list information about .xz files"
msgstr ".xz 파일에 대한 정보를 보여줍니다"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "Operation modifiers:"
msgstr "동작 지정자:"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "keep (don't delete) input files"
msgstr "입력 파일을 그대로 둡니다 (삭제 안함)"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "force overwrite of output file and (de)compress links"
msgstr "출력 파일을 강제로 덮어쓰고 링크 압축을 진행(해제)합니다"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "write to standard output and don't delete input files"
msgstr "표준 출력에 기록하고 입력 파일을 삭제하지 않습니다"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "don't synchronize the output file to the storage device before removing the input file"
msgstr "입력 파일을 제거하기 전 저장 장치로 출력 파일을 동기화하지 않습니다"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "decompress only the first stream, and silently ignore possible remaining input data"
msgstr "첫 스트림 압축만 해제하며, 가능한 나머지 입력 데이터는 무시합니다"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "do not create sparse files when decompressing"
msgstr "압축 해제시 희소 처리 파일을 만들지 않습니다"

#: src/xz/message.c
msgid ".SUF"
msgstr ".SUF"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "use the suffix '.SUF' on compressed files"
msgstr "파일 압축시 접미사를 '.SUF'로 사용합니다"

#: src/xz/message.c
msgid "FILE"
msgstr "<파일>"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "read filenames to process from FILE; if FILE is omitted, filenames are read from the standard input; filenames must be terminated with the newline character"
msgstr "<파일>에서 처리할 파일 이름을 읽습니다. <파일> 값을 생략하면, 표준 입ㄹ겨에서 파일 이름을 읽어들입니다. 파일 이름은 개행 문자로 끝나야 합니다"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "like --files but use the null character as terminator"
msgstr "--files와 비슷하나 널 문자를 종결 문자로 사용합니다"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "Basic file format and compression options:"
msgstr "기본 파일 형식 및 압축 옵션:"

#: src/xz/message.c
msgid "FORMAT"
msgstr "<형식>"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "file format to encode or decode; possible values are 'auto' (default), 'xz', 'lzma', 'lzip', and 'raw'"
msgstr "인코딩 또는 디코딩할 파일 형식입니다. 사용할 수 있는 값은 'auto'(기본), 'xz', 'lzma', 'lzip', 'raw'가 있습니다"

#: src/xz/message.c
msgid "NAME"
msgstr "<이름>"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "integrity check type: 'none' (use with caution), 'crc32', 'crc64' (default), or 'sha256'"
msgstr "무결성 검사 형식: 'none'(사용에 유의), 'crc32', 'crc64' (기본값), 'sha256'"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "don't verify the integrity check when decompressing"
msgstr "압축 해제시"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "compression preset; default is 6; take compressor *and* decompressor memory usage into account before using 7-9!"
msgstr "압축 사전 설정. 기본값은 6 입니다. 7-9를 사용하려면 압축 메모리 사용량*과* 압축 해제 메모리 사용량을 지정하십시오!"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "try to improve compression ratio by using more CPU time; does not affect decompressor memory requirements"
msgstr "CPU 점유 시간을 더 확보하여 압축률을 개선합니다. 압축 해제시 메모리 요구 용량에는 영향을 주지 않습니다"

#. TRANSLATORS: Short for NUMBER. A longer string is fine but
#. wider than 5 columns makes --long-help a few lines longer.
#: src/xz/message.c
msgid "NUM"
msgstr "<숫자>"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "use at most NUM threads; the default is 0 which uses as many threads as there are processor cores"
msgstr "최대 스레드 <개수>를 사용합니다. 기본값은 실제 프로세서 코어 수 만큼의 스레드를 사용하도록 지정하는 0 값입니다"

#: src/xz/message.c
msgid "SIZE"
msgstr "<크기>"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "start a new .xz block after every SIZE bytes of input; use this to set the block size for threaded compression"
msgstr "모든 <크기>의 입력 다음 새 .xz 블록을 시작합니다. 스레드 압축의 블록 크기를 지정할 때 사용합니다"

#: src/xz/message.c
msgid "BLOCKS"
msgstr "<블록>"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "start a new .xz block after the given comma-separated intervals of uncompressed data; optionally, specify a filter chain number (0-9) followed by a ':' before the uncompressed data size"
msgstr "콤마로 구분한 연속 지정값 만큼 압축 해제한 데이터 용량 다음, 새 .xz 블록을 시작합니다. 압축 해제 데이터 크기 앞에 콜론(':') 표기 후 필터 체인 번호(0-9)를 추가로 지정할 수 있습니다"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "when compressing, if more than NUM milliseconds has passed since the previous flush and reading more input would block, all pending data is flushed out"
msgstr "압축하는 동안, 이전 데이터를 플러싱한 후 더 많은 블록 입력을 읽어들일 때 <숫자> 만큼의 밀리초단위 제한시간을 넘기면 모든 대기 데이터를 소거합니다"

#: src/xz/message.c
msgid "LIMIT"
msgstr "<제한>"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
#, no-c-format
msgid "set memory usage limit for compression, decompression, threaded decompression, or all of these; LIMIT is in bytes, % of RAM, or 0 for defaults"
msgstr "압축, 해제, 스레드 분산 압축 해제, 또는 유사 동작 수행시 메모리 사용량 제한을 설정합니다. 바이트 단위 <제한>값, % 단위 RAM 사용량을 지정하든지 아니면 기본값으로 0을 지정하십시오"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "if compression settings exceed the memory usage limit, give an error instead of adjusting the settings downwards"
msgstr "압축 설정이 메모리 사용량 제한을 넘어서면 설정 값을 줄이는 대신 오류 메시지를 나타냅니다"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "Custom filter chain for compression (an alternative to using presets):"
msgstr "압축용 개별 필터 체인 설정 (사전 설정 사용을 대신함):"

#: src/xz/message.c
msgid "FILTERS"
msgstr "<필터>"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "set the filter chain using the liblzma filter string syntax; use --filters-help for more information"
msgstr "liblzma 필터 문자열 문법으로 필터 체인을 설정합니다. 자세한 정보는 --filters-help 옵션을 사용하십시오"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "set additional filter chains using the liblzma filter string syntax to use with --block-list"
msgstr "--block-list 옵션을 함께 사용할 수 있는 liblzma 필터 문자열 문법으로 추가 필터 체인을 설정합니다"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "display more information about the liblzma filter string syntax and exit"
msgstr "liblzma 필터 문자열 문법 추가 정보를 나타낸 후 빠져나갑니다"

#. TRANSLATORS: Short for OPTIONS.
#: src/xz/message.c
msgid "OPTS"
msgstr "<옵션>"

#. TRANSLATORS: Use semicolon (or its fullwidth form)
#. in "(valid values; default)" even if it is weird in
#. your language. There are non-translatable strings
#. that look like "(foo, bar, baz; foo)" which list
#. the supported values and the default value.
#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "LZMA1 or LZMA2; OPTS is a comma-separated list of zero or more of the following options (valid values; default):"
msgstr "LZMA1 또는 LZMA2입니다. <옵션> 값은 다음과 같은 0개 이상의 쉼표 구분 값입니다 (유효한 값. 기본값):"

#. TRANSLATORS: Short for PRESET. A longer string is
#. fine but wider than 4 columns makes --long-help
#. one line longer.
#: src/xz/message.c
msgid "PRE"
msgstr "<사전설정>"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "reset options to a preset"
msgstr "사전 설정 값으로 옵션 재설정"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "dictionary size"
msgstr "딕셔너리 크기"

#. TRANSLATORS: The word "literal" in "literal context
#. bits" means how many "context bits" to use when
#. encoding literals. A literal is a single 8-bit
#. byte. It doesn't mean "literally" here.
#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "number of literal context bits"
msgstr "보이는 대로의 컨텍스트 비트 갯수"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "number of literal position bits"
msgstr "보이는 대로의 위치 비트 갯수"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "number of position bits"
msgstr "위치 비트 수"

#: src/xz/message.c
msgid "MODE"
msgstr "<모드>"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "compression mode"
msgstr "압축 모드"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "nice length of a match"
msgstr "일치하는 항목의 nice 길이"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "match finder"
msgstr "일치 항목 검색기"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "maximum search depth; 0=automatic (default)"
msgstr "최대 검색 깊이 값. 0=자동 (기본값)"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "x86 BCJ filter (32-bit and 64-bit)"
msgstr "x86 BCJ 필터 (32비트 및 64비트)"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "ARM BCJ filter"
msgstr "ARM BCJ 필터"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "ARM-Thumb BCJ filter"
msgstr "ARM-Thumb BCJ 필터"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "ARM64 BCJ filter"
msgstr "ARM64 BCJ 필더"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "PowerPC BCJ filter (big endian only)"
msgstr "PowerPC BCJ 필터 (빅 엔디안 전용)"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "IA-64 (Itanium) BCJ filter"
msgstr "IA-64 (아이태니엄) BCJ 필터"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "SPARC BCJ filter"
msgstr "SPARC BCJ 필터"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "RISC-V BCJ filter"
msgstr "RISC-V BCJ 필터"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "Valid OPTS for all BCJ filters:"
msgstr "모든 BCJ 필터에 대한 적절한 <옵션>값:"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "start offset for conversions (default=0)"
msgstr "변환 시작 오프셋 값 (기본값=0)"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "Delta filter; valid OPTS (valid values; default):"
msgstr "델타 필터. 적절한 <옵션> (적절한 값. 기본값):"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "distance between bytes being subtracted from each other"
msgstr "바이트 값 차이 거리"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "Other options:"
msgstr "기타 옵션:"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "suppress warnings; specify twice to suppress errors too"
msgstr "경고문 숨김. 더 많은 오류 메시지를 숨가려면 두번 지정하십시오"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "be verbose; specify twice for even more verbose"
msgstr "자세하게 표시. 더 자세하게 출력하려면 두번 지정하십시오"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "make warnings not affect the exit status"
msgstr "경고가 종료 상태에 영향을 주지 않게합니다"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "use machine-parsable messages (useful for scripts)"
msgstr "기계 해석 가능한 메시지를 사용합니다 (스크립트 활용시 유용함)"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "display the total amount of RAM and the currently active memory usage limits, and exit"
msgstr "RAM 총 용량과 현재 활성 메모리 사용 한계값을 표시하고 나갑니다"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "display the short help (lists only the basic options)"
msgstr "간단한 도움말 표시 (기본 옵션만 표시)"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "display this long help and exit"
msgstr "이 긴 도움말을 보여주고 나갑니다"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "display this short help and exit"
msgstr "이 간단한 도움말을 보여주고 나갑니다"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "display the long help (lists also the advanced options)"
msgstr "긴 도움말 표시 (고급 옵션도 보여줍니다)"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "display the version number and exit"
msgstr "버전 번호를 표시하고 빠져나갑니다"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c src/lzmainfo/lzmainfo.c
msgid "With no FILE, or when FILE is -, read standard input."
msgstr "<파일> 값이 없거나, <파일> 값이 - 문자이면, 표준 입력을 읽어들입니다."

#. TRANSLATORS: This message indicates the bug reporting
#. address for this package. Please add another line saying
#. "\nReport translation bugs to <...>." with the email or WWW
#. address for translation bugs. Thanks!
#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c src/lzmainfo/lzmainfo.c
#, c-format
msgid "Report bugs to <%s> (in English or Finnish)."
msgstr "<%s> (영문 또는 핀란드어)에 버그를 보고하십시오."

#. TRANSLATORS: The first %s is the name of this software.
#. The second <%s> is an URL.
#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c src/lzmainfo/lzmainfo.c
#, c-format
msgid "%s home page: <%s>"
msgstr "%s 홈페이지: <%s>"

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "THIS IS A DEVELOPMENT VERSION NOT INTENDED FOR PRODUCTION USE."
msgstr "!! 주의 !! 개발 버전이며 실제 사용 용도가 아닙니다."

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
#, c-format
msgid "Filter chains are set using the --filters=FILTERS or --filters1=FILTERS ... --filters9=FILTERS options. Each filter in the chain can be separated by spaces or '--'. Alternatively a preset %s can be specified instead of a filter chain."
msgstr ""
"--filters=<필터> 또는 --filters1=<필터> ... --filters9=<필터> 옵션으로\n"
"필터 체인을 지정합니다. 체인의 각 필터는 공백 문자 또는 '--'으로 구분할 수 있습니다.\n"
"필터 체인 대신 %s 사전 설정 값을 지정할 수 있습니다."

#. This is word wrapped at spaces. The Unicode character U+00A0 works as a non-breaking space. Tab (\t) is interpret as a zero-width space (the tab itself is not displayed); U+200B is NOT supported. Manual word wrapping with \n is supported but requires care.
#: src/xz/message.c
msgid "The supported filters and their options are:"
msgstr "지원하는 필터와 옵션은 다음과 같습니다:"

#: src/xz/options.c src/liblzma/common/string_conversion.c
msgid "Options must be 'name=value' pairs separated with commas"
msgstr "옵션은 쉼표로 구분한 '이름=값' 쌍이어야합니다"

#: src/xz/options.c
#, c-format
msgid "%s: Invalid option name"
msgstr "%s: 잘못된 옵션 이름"

#: src/xz/options.c src/liblzma/common/string_conversion.c
msgid "Invalid option value"
msgstr "잘못된 옵션 값"

#: src/xz/options.c
#, c-format
msgid "Unsupported LZMA1/LZMA2 preset: %s"
msgstr "지원하지 않는 LZMA1/LZMA2 사전 설정: %s"

#: src/xz/options.c src/liblzma/common/string_conversion.c
msgid "The sum of lc and lp must not exceed 4"
msgstr "lc값과 lp값의 합이 4를 초과하면 안됩니다"

#: src/xz/suffix.c
#, c-format
msgid "%s: Filename has an unknown suffix, skipping"
msgstr "%s: 파일 이름에 알 수 없는 확장자 붙음, 건너뜀"

#: src/xz/suffix.c
#, c-format
msgid "%s: File already has '%s' suffix, skipping"
msgstr "%s: 파일에 이미 '%s' 확장자가 붙음, 건너뜀"

#: src/xz/suffix.c
#, c-format
msgid "%s: Invalid filename suffix"
msgstr "%s: 잘못된 파일 이름 확장자"

#: src/xz/util.c src/liblzma/common/string_conversion.c
msgid "Value is not a non-negative decimal integer"
msgstr "값이 10진 양의 정수가 아닙니다"

#: src/xz/util.c
#, c-format
msgid "%s: Invalid multiplier suffix"
msgstr "%s: 잘못된 승수 단위"

#: src/xz/util.c
msgid "Valid suffixes are 'KiB' (2^10), 'MiB' (2^20), and 'GiB' (2^30)."
msgstr "사용할 수 있는 단위는 'KiB' (2^10), 'MiB' (2^20), 'GiB' (2^30) 입니다."

#: src/xz/util.c
#, c-format
msgid "Value of the option '%s' must be in the range [%<PRIu64>, %<PRIu64>]"
msgstr "'%s' 옵션 값은 [%<PRIu64>, %<PRIu64>] 범위 안에 있어야 합니다"

#: src/xz/util.c
msgid "Compressed data cannot be read from a terminal"
msgstr "압축 데이터를 터미널에서 읽을 수 없습니다"

#: src/xz/util.c
msgid "Compressed data cannot be written to a terminal"
msgstr "압축 데이터를 터미널에 기록할 수 없습니다"

#: src/lzmainfo/lzmainfo.c
#, c-format
msgid "Usage: %s [--help] [--version] [FILE]...\n"
msgstr "사용법: %s [--help] [--version] [<파일>]...\n"

#: src/lzmainfo/lzmainfo.c
msgid "Show information stored in the .lzma file header."
msgstr ".lzma 파일 헤더에 저장한 정보를 보여줍니다."

#: src/lzmainfo/lzmainfo.c
msgid "File is too small to be a .lzma file"
msgstr ".lzma 파일이기에는 너무 작습니다"

#: src/lzmainfo/lzmainfo.c
msgid "Not a .lzma file"
msgstr ".lzma 파일이 아닙니다"

#: src/common/tuklib_exit.c
msgid "Writing to standard output failed"
msgstr "표준 출력 기록 실패"

#: src/common/tuklib_exit.c
msgid "Unknown error"
msgstr "알 수 없는 오류"

#: src/liblzma/common/string_conversion.c
msgid "Unsupported preset"
msgstr "지원하지 않는 사전 설정"

#: src/liblzma/common/string_conversion.c
msgid "Unsupported flag in the preset"
msgstr "지원하지 않는 사전 설정 플래그"

#: src/liblzma/common/string_conversion.c
msgid "Unknown option name"
msgstr "알 수 없는 옵션 이름"

#: src/liblzma/common/string_conversion.c
msgid "Option value cannot be empty"
msgstr "옵션 값을 비워둘 수 없습니다"

#: src/liblzma/common/string_conversion.c
msgid "Value out of range"
msgstr "값 범위 벗어남"

#: src/liblzma/common/string_conversion.c
msgid "This option does not support any multiplier suffixes"
msgstr "이 옵션은 배수 단위 접미사를 지원하지 않습니다"

#. TRANSLATORS: Don't translate the
#. suffixes "KiB", "MiB", or "GiB"
#. because a user can only specify
#. untranslated suffixes.
#: src/liblzma/common/string_conversion.c
msgid "Invalid multiplier suffix (KiB, MiB, or GiB)"
msgstr "잘못된 배수 단위 (KiB, MiB, 또는 GiB)"

#: src/liblzma/common/string_conversion.c
msgid "Unknown filter name"
msgstr "알 수 없는 파일 형식"

#: src/liblzma/common/string_conversion.c
msgid "This filter cannot be used in the .xz format"
msgstr ".xz 형식에 이 필터를 사용할 수 없습니다"

#: src/liblzma/common/string_conversion.c
msgid "Memory allocation failed"
msgstr "메모리 할당 실패"

#: src/liblzma/common/string_conversion.c
msgid "Empty string is not allowed, try '6' if a default value is needed"
msgstr "빈 문자열을 허용하지 않습니다. 기본값이 필요하다면 '6'을 넣으십시오"

#: src/liblzma/common/string_conversion.c
msgid "The maximum number of filters is four"
msgstr "최대 필터 갯수는 4 입니다"

#: src/liblzma/common/string_conversion.c
msgid "Filter name is missing"
msgstr "필터 이름이 빠졌습니다"

#: src/liblzma/common/string_conversion.c
msgid "Invalid filter chain ('lzma2' missing at the end?)"
msgstr "부적절한 필터 체인 ('lzma2'를 뺐습니까?)"