xz/CMakeLists.txt

878 lines
31 KiB
CMake
Raw Normal View History

#############################################################################
#
# Very limited CMake support for building some parts of XZ Utils
#
# For now, this is indented to be useful to build static or shared liblzma
# on Windows with MSVC (to avoid the need to maintain Visual Studio project
# files). Building liblzma on a few other platforms should work too but it
# is somewhat experimental and not as portable as using ./configure.
#
# On some platforms this builds also xz and xzdec, but these are
# highly experimental and meant for testing only:
# - No large file support on those 32-bit platforms that need it
# - No replacement getopt_long(), libc must have it
# - No sandboxing support
# - No translations
#
# Other missing things:
# - No xzgrep or other scripts or their symlinks
# - No xz tests (liblzma tests only)
#
# NOTE: Even if the code compiles without warnings, the end result may be
# different than via ./configure. Specifically, the list of #defines
# may be different (if so, probably this CMakeLists.txt got them wrong).
#
# This file provides the following installation components (if you only
# need liblzma, install only its components!):
# - liblzma_Runtime
# - liblzma_Development
# - xz (on some platforms only)
# - xzdec (on some platforms only)
#
# To find the target liblzma::liblzma from other packages, use the CONFIG
# option with find_package() to avoid a conflict with the FindLibLZMA module
# with case-insensitive file systems. For example, to require liblzma 5.2.5
# or a newer compatible version:
#
# find_package(liblzma 5.2.5 REQUIRED CONFIG)
# target_link_libraries(my_application liblzma::liblzma)
#
#############################################################################
#
# Author: Lasse Collin
#
# This file has been put into the public domain.
# You can do whatever you want with this file.
#
#############################################################################
cmake_minimum_required(VERSION 3.13...3.25 FATAL_ERROR)
include(CMakePushCheckState)
liblzma: Add fast CRC64 for 32/64-bit x86 using SSSE3 + SSE4.1 + CLMUL. It also works on E2K as it supports these intrinsics. On x86-64 runtime detection is used so the code keeps working on older processors too. A CLMUL-only build can be done by using -msse4.1 -mpclmul in CFLAGS and this will reduce the library size since the generic implementation and its 8 KiB lookup table will be omitted. On 32-bit x86 this isn't used by default for now because by default on 32-bit x86 the separate assembly file crc64_x86.S is used. If --disable-assembler is used then this new CLMUL code is used the same way as on 64-bit x86. However, a CLMUL-only build (-msse4.1 -mpclmul) won't omit the 8 KiB lookup table on 32-bit x86 due to a currently-missing check for disabled assembler usage. The configure.ac check should be such that the code won't be built if something in the toolchain doesn't support it but --disable-clmul-crc option can be used to unconditionally disable this feature. CLMUL speeds up decompression of files that have compressed very well (assuming CRC64 is used as a check type). It is know that the CLMUL code is significantly slower than the generic code for tiny inputs (especially 1-8 bytes but up to 16 bytes). If that is a real-world problem then there is already a commented-out variant that uses the generic version for small inputs. Thanks to Ilya Kurdyukov for the original patch which was derived from a white paper from Intel [1] (published in 2009) and public domain code from [2] (released in 2016). [1] https://www.intel.com/content/dam/www/public/us/en/documents/white-papers/fast-crc-computation-generic-polynomials-pclmulqdq-paper.pdf [2] https://github.com/rawrunprotected/crc
2022-11-14 19:34:57 +00:00
include(CheckIncludeFile)
include(CheckSymbolExists)
include(CheckStructHasMember)
liblzma: Add fast CRC64 for 32/64-bit x86 using SSSE3 + SSE4.1 + CLMUL. It also works on E2K as it supports these intrinsics. On x86-64 runtime detection is used so the code keeps working on older processors too. A CLMUL-only build can be done by using -msse4.1 -mpclmul in CFLAGS and this will reduce the library size since the generic implementation and its 8 KiB lookup table will be omitted. On 32-bit x86 this isn't used by default for now because by default on 32-bit x86 the separate assembly file crc64_x86.S is used. If --disable-assembler is used then this new CLMUL code is used the same way as on 64-bit x86. However, a CLMUL-only build (-msse4.1 -mpclmul) won't omit the 8 KiB lookup table on 32-bit x86 due to a currently-missing check for disabled assembler usage. The configure.ac check should be such that the code won't be built if something in the toolchain doesn't support it but --disable-clmul-crc option can be used to unconditionally disable this feature. CLMUL speeds up decompression of files that have compressed very well (assuming CRC64 is used as a check type). It is know that the CLMUL code is significantly slower than the generic code for tiny inputs (especially 1-8 bytes but up to 16 bytes). If that is a real-world problem then there is already a commented-out variant that uses the generic version for small inputs. Thanks to Ilya Kurdyukov for the original patch which was derived from a white paper from Intel [1] (published in 2009) and public domain code from [2] (released in 2016). [1] https://www.intel.com/content/dam/www/public/us/en/documents/white-papers/fast-crc-computation-generic-polynomials-pclmulqdq-paper.pdf [2] https://github.com/rawrunprotected/crc
2022-11-14 19:34:57 +00:00
include(CheckCSourceCompiles)
include(cmake/tuklib_integer.cmake)
include(cmake/tuklib_cpucores.cmake)
include(cmake/tuklib_physmem.cmake)
include(cmake/tuklib_progname.cmake)
include(cmake/tuklib_mbstr.cmake)
# Get the package version from version.h into XZ_VERSION variable.
file(READ src/liblzma/api/lzma/version.h XZ_VERSION)
string(REGEX REPLACE
"^.*\n\
#define LZMA_VERSION_MAJOR ([0-9]+)\n\
#define LZMA_VERSION_MINOR ([0-9]+)\n\
#define LZMA_VERSION_PATCH ([0-9]+)\n\
.*$"
"\\1.\\2.\\3" XZ_VERSION "${XZ_VERSION}")
# Among other things, this gives us variables xz_VERSION and xz_VERSION_MAJOR.
project(xz VERSION "${XZ_VERSION}" LANGUAGES C)
# On Apple OSes, don't build executables as bundles:
set(CMAKE_MACOSX_BUNDLE OFF)
# String for PACKAGE_NAME macro in the C code and Windows resource files:
#
# windres from GNU binutils can be a bit tricky with command line arguments
# that contain spaces or other funny characters because it will pass them
# to a shell (cmd.exe or /bin/sh). CMake doesn't seem to handle the quoting
# well enough either. Using \x20 to encode the US-ASCII space seems to work:
# it should be compatible with both shell types, it works also with llvm-rc,
# and CMake handles quoting the backslash too.
#
# For simplicity, use this workaround in all cases on Windows as it should
# do no harm with other toolchains. Outside Windows use a regular space as
# then we are compatible with EBCDIC too (if it will ever matter with CMake;
# EBCDIC compatibility is important with the Autotools-based build though).
if(WIN32)
set(PACKAGE_NAME "XZ\\x20Utils")
else()
set(PACKAGE_NAME "XZ Utils")
endif()
# Definitions common to all targets:
add_compile_definitions(
# Package info:
PACKAGE_NAME="${PACKAGE_NAME}"
PACKAGE_BUGREPORT="xz@tukaani.org"
PACKAGE_URL="https://tukaani.org/xz/"
# Features:
HAVE_CHECK_CRC32
HAVE_CHECK_CRC64
HAVE_CHECK_SHA256
HAVE_DECODERS
HAVE_DECODER_ARM
HAVE_DECODER_ARMTHUMB
HAVE_DECODER_ARM64
HAVE_DECODER_DELTA
HAVE_DECODER_IA64
HAVE_DECODER_LZMA1
HAVE_DECODER_LZMA2
HAVE_DECODER_POWERPC
HAVE_DECODER_SPARC
HAVE_DECODER_X86
HAVE_ENCODERS
HAVE_ENCODER_ARM
HAVE_ENCODER_ARMTHUMB
HAVE_ENCODER_ARM64
HAVE_ENCODER_DELTA
HAVE_ENCODER_IA64
HAVE_ENCODER_LZMA1
HAVE_ENCODER_LZMA2
HAVE_ENCODER_POWERPC
HAVE_ENCODER_SPARC
HAVE_ENCODER_X86
HAVE_MF_BT2
HAVE_MF_BT3
HAVE_MF_BT4
HAVE_MF_HC3
HAVE_MF_HC4
HAVE_LZIP_DECODER
# Standard headers and types are available:
HAVE_STDBOOL_H
HAVE__BOOL
HAVE_STDINT_H
HAVE_INTTYPES_H
# Disable assert() checks when no build type has been specified. Non-empty
# build types like "Release" and "Debug" handle this by default.
$<$<CONFIG:>:NDEBUG>
)
# _GNU_SOURCE and such definitions. This specific macro is special since
# it also adds the definitions to CMAKE_REQUIRED_DEFINITIONS.
tuklib_use_system_extensions(ALL)
# This is needed by liblzma and xz.
tuklib_integer(ALL)
# Check for clock_gettime(). Do this before checking for threading so
# that we know there if CLOCK_MONOTONIC is available.
if(NOT WIN32 AND NOT DEFINED HAVE_CLOCK_GETTIME)
check_symbol_exists(clock_gettime time.h HAVE_CLOCK_GETTIME)
if(NOT HAVE_CLOCK_GETTIME)
# With glibc <= 2.17 or Solaris 10 this needs librt.
unset(HAVE_CLOCK_GETTIME CACHE)
list(INSERT CMAKE_REQUIRED_LIBRARIES 0 rt)
check_symbol_exists(clock_gettime time.h HAVE_CLOCK_GETTIME)
# If it was found now, add it to all targets and keep it
# in CMAKE_REQUIRED_LIBRARIES for further tests too.
if(HAVE_CLOCK_GETTIME)
link_libraries(rt)
else()
list(REMOVE_AT CMAKE_REQUIRED_LIBRARIES 0)
endif()
endif()
if(HAVE_CLOCK_GETTIME)
# Check if CLOCK_MONOTONIC is available for clock_gettime().
check_symbol_exists(CLOCK_MONOTONIC time.h HAVE_CLOCK_MONOTONIC)
add_compile_definitions(
HAVE_CLOCK_GETTIME
HAVE_CLOCK_MONOTONIC
)
endif()
endif()
# Threading support:
set(THREADS_PREFER_PTHREAD_FLAG TRUE)
find_package(Threads REQUIRED)
if(CMAKE_USE_WIN32_THREADS_INIT)
if(CMAKE_SIZEOF_VOID_P EQUAL 4)
# Define to 1 when using Windows 95 (and thus XP) compatible threads. This
# avoids use of features that were added in Windows Vista.
# This is used for 32-bit x86 builds for compatibility reasons since it
# makes no measurable difference in performance compared to Vista threads.
add_compile_definitions(MYTHREAD_WIN95)
else()
# Define to 1 when using Windows Vista compatible threads. This uses features
# that are not available on Windows XP.
add_compile_definitions(MYTHREAD_VISTA)
endif()
else()
add_compile_definitions(MYTHREAD_POSIX)
# Check if pthread_condattr_setclock() exists to use CLOCK_MONOTONIC.
if(HAVE_CLOCK_MONOTONIC)
list(INSERT CMAKE_REQUIRED_LIBRARIES 0 "${CMAKE_THREAD_LIBS_INIT}")
check_symbol_exists(pthread_condattr_setclock pthread.h
HAVE_PTHREAD_CONDATTR_SETCLOCK)
tuklib_add_definition_if(ALL HAVE_PTHREAD_CONDATTR_SETCLOCK)
endif()
endif()
# Options for new enough GCC or Clang on any arch or operating system:
if(CMAKE_C_COMPILER_ID MATCHES GNU|Clang)
# configure.ac has a long list but it won't be copied here:
add_compile_options(-Wall -Wextra)
endif()
#############################################################################
# liblzma
#############################################################################
option(BUILD_SHARED_LIBS "Build liblzma as a shared library instead of static")
add_library(liblzma
src/common/mythread.h
src/common/sysdefs.h
src/common/tuklib_common.h
src/common/tuklib_config.h
src/common/tuklib_cpucores.c
src/common/tuklib_cpucores.h
src/common/tuklib_integer.h
src/common/tuklib_physmem.c
src/common/tuklib_physmem.h
src/liblzma/api/lzma.h
src/liblzma/api/lzma/base.h
src/liblzma/api/lzma/bcj.h
src/liblzma/api/lzma/block.h
src/liblzma/api/lzma/check.h
src/liblzma/api/lzma/container.h
src/liblzma/api/lzma/delta.h
src/liblzma/api/lzma/filter.h
src/liblzma/api/lzma/hardware.h
src/liblzma/api/lzma/index.h
src/liblzma/api/lzma/index_hash.h
src/liblzma/api/lzma/lzma12.h
src/liblzma/api/lzma/stream_flags.h
src/liblzma/api/lzma/version.h
src/liblzma/api/lzma/vli.h
src/liblzma/check/check.c
src/liblzma/check/check.h
src/liblzma/check/crc32_fast.c
src/liblzma/check/crc32_table.c
src/liblzma/check/crc32_table_be.h
src/liblzma/check/crc32_table_le.h
src/liblzma/check/crc64_fast.c
src/liblzma/check/crc64_table.c
src/liblzma/check/crc64_table_be.h
src/liblzma/check/crc64_table_le.h
src/liblzma/check/crc_macros.h
src/liblzma/check/sha256.c
src/liblzma/common/alone_decoder.c
src/liblzma/common/alone_decoder.h
src/liblzma/common/alone_encoder.c
src/liblzma/common/auto_decoder.c
src/liblzma/common/block_buffer_decoder.c
src/liblzma/common/block_buffer_encoder.c
src/liblzma/common/block_buffer_encoder.h
src/liblzma/common/block_decoder.c
src/liblzma/common/block_decoder.h
src/liblzma/common/block_encoder.c
src/liblzma/common/block_encoder.h
src/liblzma/common/block_header_decoder.c
src/liblzma/common/block_header_encoder.c
src/liblzma/common/block_util.c
src/liblzma/common/common.c
src/liblzma/common/common.h
src/liblzma/common/easy_buffer_encoder.c
src/liblzma/common/easy_decoder_memusage.c
src/liblzma/common/easy_encoder.c
src/liblzma/common/easy_encoder_memusage.c
src/liblzma/common/easy_preset.c
src/liblzma/common/easy_preset.h
src/liblzma/common/file_info.c
src/liblzma/common/filter_buffer_decoder.c
src/liblzma/common/filter_buffer_encoder.c
src/liblzma/common/filter_common.c
src/liblzma/common/filter_common.h
src/liblzma/common/filter_decoder.c
src/liblzma/common/filter_decoder.h
src/liblzma/common/filter_encoder.c
src/liblzma/common/filter_encoder.h
src/liblzma/common/filter_flags_decoder.c
src/liblzma/common/filter_flags_encoder.c
src/liblzma/common/hardware_cputhreads.c
src/liblzma/common/hardware_physmem.c
src/liblzma/common/index.c
src/liblzma/common/index.h
src/liblzma/common/index_decoder.c
src/liblzma/common/index_decoder.h
src/liblzma/common/index_encoder.c
src/liblzma/common/index_encoder.h
src/liblzma/common/index_hash.c
src/liblzma/common/lzip_decoder.c
src/liblzma/common/lzip_decoder.h
src/liblzma/common/memcmplen.h
src/liblzma/common/outqueue.c
src/liblzma/common/outqueue.h
src/liblzma/common/stream_buffer_decoder.c
src/liblzma/common/stream_buffer_encoder.c
src/liblzma/common/stream_decoder.c
src/liblzma/common/stream_decoder_mt.c
src/liblzma/common/stream_decoder.h
src/liblzma/common/stream_encoder.c
src/liblzma/common/stream_encoder_mt.c
src/liblzma/common/stream_flags_common.c
src/liblzma/common/stream_flags_common.h
src/liblzma/common/stream_flags_decoder.c
src/liblzma/common/stream_flags_encoder.c
src/liblzma/common/string_conversion.c
src/liblzma/common/vli_decoder.c
src/liblzma/common/vli_encoder.c
src/liblzma/common/vli_size.c
src/liblzma/delta/delta_common.c
src/liblzma/delta/delta_common.h
src/liblzma/delta/delta_decoder.c
src/liblzma/delta/delta_decoder.h
src/liblzma/delta/delta_encoder.c
src/liblzma/delta/delta_encoder.h
src/liblzma/delta/delta_private.h
src/liblzma/lz/lz_decoder.c
src/liblzma/lz/lz_decoder.h
src/liblzma/lz/lz_encoder.c
src/liblzma/lz/lz_encoder.h
src/liblzma/lz/lz_encoder_hash.h
src/liblzma/lz/lz_encoder_hash_table.h
src/liblzma/lz/lz_encoder_mf.c
src/liblzma/lzma/fastpos.h
src/liblzma/lzma/fastpos_table.c
src/liblzma/lzma/lzma2_decoder.c
src/liblzma/lzma/lzma2_decoder.h
src/liblzma/lzma/lzma2_encoder.c
src/liblzma/lzma/lzma2_encoder.h
src/liblzma/lzma/lzma_common.h
src/liblzma/lzma/lzma_decoder.c
src/liblzma/lzma/lzma_decoder.h
src/liblzma/lzma/lzma_encoder.c
src/liblzma/lzma/lzma_encoder.h
src/liblzma/lzma/lzma_encoder_optimum_fast.c
src/liblzma/lzma/lzma_encoder_optimum_normal.c
src/liblzma/lzma/lzma_encoder_presets.c
src/liblzma/lzma/lzma_encoder_private.h
src/liblzma/rangecoder/price.h
src/liblzma/rangecoder/price_table.c
src/liblzma/rangecoder/range_common.h
src/liblzma/rangecoder/range_decoder.h
src/liblzma/rangecoder/range_encoder.h
src/liblzma/simple/arm.c
src/liblzma/simple/armthumb.c
src/liblzma/simple/arm64.c
src/liblzma/simple/ia64.c
src/liblzma/simple/powerpc.c
src/liblzma/simple/simple_coder.c
src/liblzma/simple/simple_coder.h
src/liblzma/simple/simple_decoder.c
src/liblzma/simple/simple_decoder.h
src/liblzma/simple/simple_encoder.c
src/liblzma/simple/simple_encoder.h
src/liblzma/simple/simple_private.h
src/liblzma/simple/sparc.c
src/liblzma/simple/x86.c
)
target_include_directories(liblzma PRIVATE
src/liblzma/api
src/liblzma/common
src/liblzma/check
src/liblzma/lz
src/liblzma/rangecoder
src/liblzma/lzma
src/liblzma/delta
src/liblzma/simple
src/common
)
target_link_libraries(liblzma Threads::Threads)
# Put the tuklib functions under the lzma_ namespace.
target_compile_definitions(liblzma PRIVATE TUKLIB_SYMBOL_PREFIX=lzma_)
tuklib_cpucores(liblzma)
tuklib_physmem(liblzma)
# While liblzma can be built without tuklib_cpucores or tuklib_physmem
# modules, the liblzma API functions lzma_cputhreads() and lzma_physmem()
# will then be useless (which isn't too bad but still unfortunate). Since
# I expect the CMake-based builds to be only used on systems that are
# supported by these tuklib modules, problems with these tuklib modules
# are considered a hard error for now. This hopefully helps to catch bugs
# in the CMake versions of the tuklib checks.
if(NOT TUKLIB_CPUCORES_FOUND OR NOT TUKLIB_PHYSMEM_FOUND)
# Use SEND_ERROR instead of FATAL_ERROR. If someone reports a bug,
# seeing the results of the remaining checks can be useful too.
message(SEND_ERROR
"tuklib_cpucores() or tuklib_physmem() failed. "
"Unless you really are building for a system where these "
"modules are not supported (unlikely), this is a bug in the "
"included cmake/tuklib_*.cmake files that should be fixed. "
"To build anyway, edit this CMakeLists.txt to ignore this error.")
endif()
# Check for __attribute__((__constructor__)) support.
# This needs -Werror because some compilers just warn
# about this being unsupported.
cmake_push_check_state()
set(CMAKE_REQUIRED_FLAGS "-Werror")
check_c_source_compiles("
__attribute__((__constructor__))
static void my_constructor_func(void) { return; }
int main(void) { return 0; }
"
HAVE_FUNC_ATTRIBUTE_CONSTRUCTOR)
cmake_pop_check_state()
tuklib_add_definition_if(liblzma HAVE_FUNC_ATTRIBUTE_CONSTRUCTOR)
liblzma: Add fast CRC64 for 32/64-bit x86 using SSSE3 + SSE4.1 + CLMUL. It also works on E2K as it supports these intrinsics. On x86-64 runtime detection is used so the code keeps working on older processors too. A CLMUL-only build can be done by using -msse4.1 -mpclmul in CFLAGS and this will reduce the library size since the generic implementation and its 8 KiB lookup table will be omitted. On 32-bit x86 this isn't used by default for now because by default on 32-bit x86 the separate assembly file crc64_x86.S is used. If --disable-assembler is used then this new CLMUL code is used the same way as on 64-bit x86. However, a CLMUL-only build (-msse4.1 -mpclmul) won't omit the 8 KiB lookup table on 32-bit x86 due to a currently-missing check for disabled assembler usage. The configure.ac check should be such that the code won't be built if something in the toolchain doesn't support it but --disable-clmul-crc option can be used to unconditionally disable this feature. CLMUL speeds up decompression of files that have compressed very well (assuming CRC64 is used as a check type). It is know that the CLMUL code is significantly slower than the generic code for tiny inputs (especially 1-8 bytes but up to 16 bytes). If that is a real-world problem then there is already a commented-out variant that uses the generic version for small inputs. Thanks to Ilya Kurdyukov for the original patch which was derived from a white paper from Intel [1] (published in 2009) and public domain code from [2] (released in 2016). [1] https://www.intel.com/content/dam/www/public/us/en/documents/white-papers/fast-crc-computation-generic-polynomials-pclmulqdq-paper.pdf [2] https://github.com/rawrunprotected/crc
2022-11-14 19:34:57 +00:00
# cpuid.h
check_include_file(cpuid.h HAVE_CPUID_H)
tuklib_add_definition_if(liblzma HAVE_CPUID_H)
# immintrin.h:
check_include_file(immintrin.h HAVE_IMMINTRIN_H)
if(HAVE_IMMINTRIN_H)
target_compile_definitions(liblzma PRIVATE HAVE_IMMINTRIN_H)
# SSE2 intrinsics:
check_c_source_compiles("
#include <immintrin.h>
int main(void)
{
__m128i x = { 0 };
_mm_movemask_epi8(x);
return 0;
}
"
HAVE__MM_MOVEMASK_EPI8)
tuklib_add_definition_if(liblzma HAVE__MM_MOVEMASK_EPI8)
liblzma: Add fast CRC64 for 32/64-bit x86 using SSSE3 + SSE4.1 + CLMUL. It also works on E2K as it supports these intrinsics. On x86-64 runtime detection is used so the code keeps working on older processors too. A CLMUL-only build can be done by using -msse4.1 -mpclmul in CFLAGS and this will reduce the library size since the generic implementation and its 8 KiB lookup table will be omitted. On 32-bit x86 this isn't used by default for now because by default on 32-bit x86 the separate assembly file crc64_x86.S is used. If --disable-assembler is used then this new CLMUL code is used the same way as on 64-bit x86. However, a CLMUL-only build (-msse4.1 -mpclmul) won't omit the 8 KiB lookup table on 32-bit x86 due to a currently-missing check for disabled assembler usage. The configure.ac check should be such that the code won't be built if something in the toolchain doesn't support it but --disable-clmul-crc option can be used to unconditionally disable this feature. CLMUL speeds up decompression of files that have compressed very well (assuming CRC64 is used as a check type). It is know that the CLMUL code is significantly slower than the generic code for tiny inputs (especially 1-8 bytes but up to 16 bytes). If that is a real-world problem then there is already a commented-out variant that uses the generic version for small inputs. Thanks to Ilya Kurdyukov for the original patch which was derived from a white paper from Intel [1] (published in 2009) and public domain code from [2] (released in 2016). [1] https://www.intel.com/content/dam/www/public/us/en/documents/white-papers/fast-crc-computation-generic-polynomials-pclmulqdq-paper.pdf [2] https://github.com/rawrunprotected/crc
2022-11-14 19:34:57 +00:00
# CLMUL intrinsic:
check_c_source_compiles("
#include <immintrin.h>
#if defined(__e2k__) && __iset__ < 6
# error
#endif
#if (defined(__GNUC__) || defined(__clang__)) && !defined(__EDG__)
__attribute__((__target__(\"ssse3,sse4.1,pclmul\")))
#endif
__m128i my_clmul(__m128i a)
liblzma: Add fast CRC64 for 32/64-bit x86 using SSSE3 + SSE4.1 + CLMUL. It also works on E2K as it supports these intrinsics. On x86-64 runtime detection is used so the code keeps working on older processors too. A CLMUL-only build can be done by using -msse4.1 -mpclmul in CFLAGS and this will reduce the library size since the generic implementation and its 8 KiB lookup table will be omitted. On 32-bit x86 this isn't used by default for now because by default on 32-bit x86 the separate assembly file crc64_x86.S is used. If --disable-assembler is used then this new CLMUL code is used the same way as on 64-bit x86. However, a CLMUL-only build (-msse4.1 -mpclmul) won't omit the 8 KiB lookup table on 32-bit x86 due to a currently-missing check for disabled assembler usage. The configure.ac check should be such that the code won't be built if something in the toolchain doesn't support it but --disable-clmul-crc option can be used to unconditionally disable this feature. CLMUL speeds up decompression of files that have compressed very well (assuming CRC64 is used as a check type). It is know that the CLMUL code is significantly slower than the generic code for tiny inputs (especially 1-8 bytes but up to 16 bytes). If that is a real-world problem then there is already a commented-out variant that uses the generic version for small inputs. Thanks to Ilya Kurdyukov for the original patch which was derived from a white paper from Intel [1] (published in 2009) and public domain code from [2] (released in 2016). [1] https://www.intel.com/content/dam/www/public/us/en/documents/white-papers/fast-crc-computation-generic-polynomials-pclmulqdq-paper.pdf [2] https://github.com/rawrunprotected/crc
2022-11-14 19:34:57 +00:00
{
const __m128i b = _mm_set_epi64x(1, 2);
liblzma: Add fast CRC64 for 32/64-bit x86 using SSSE3 + SSE4.1 + CLMUL. It also works on E2K as it supports these intrinsics. On x86-64 runtime detection is used so the code keeps working on older processors too. A CLMUL-only build can be done by using -msse4.1 -mpclmul in CFLAGS and this will reduce the library size since the generic implementation and its 8 KiB lookup table will be omitted. On 32-bit x86 this isn't used by default for now because by default on 32-bit x86 the separate assembly file crc64_x86.S is used. If --disable-assembler is used then this new CLMUL code is used the same way as on 64-bit x86. However, a CLMUL-only build (-msse4.1 -mpclmul) won't omit the 8 KiB lookup table on 32-bit x86 due to a currently-missing check for disabled assembler usage. The configure.ac check should be such that the code won't be built if something in the toolchain doesn't support it but --disable-clmul-crc option can be used to unconditionally disable this feature. CLMUL speeds up decompression of files that have compressed very well (assuming CRC64 is used as a check type). It is know that the CLMUL code is significantly slower than the generic code for tiny inputs (especially 1-8 bytes but up to 16 bytes). If that is a real-world problem then there is already a commented-out variant that uses the generic version for small inputs. Thanks to Ilya Kurdyukov for the original patch which was derived from a white paper from Intel [1] (published in 2009) and public domain code from [2] (released in 2016). [1] https://www.intel.com/content/dam/www/public/us/en/documents/white-papers/fast-crc-computation-generic-polynomials-pclmulqdq-paper.pdf [2] https://github.com/rawrunprotected/crc
2022-11-14 19:34:57 +00:00
return _mm_clmulepi64_si128(a, b, 0);
}
int main(void) { return 0; }
"
HAVE_USABLE_CLMUL)
tuklib_add_definition_if(liblzma HAVE_USABLE_CLMUL)
endif()
# Support -fvisiblity=hidden when building shared liblzma.
# These lines do nothing on Windows (even under Cygwin).
# HAVE_VISIBILITY should always be defined to 0 or 1.
if(BUILD_SHARED_LIBS)
set_target_properties(liblzma PROPERTIES C_VISIBILITY_PRESET hidden)
target_compile_definitions(liblzma PRIVATE HAVE_VISIBILITY=1)
else()
target_compile_definitions(liblzma PRIVATE HAVE_VISIBILITY=0)
endif()
if(WIN32)
if(BUILD_SHARED_LIBS)
# Add the Windows resource file for liblzma.dll.
target_sources(liblzma PRIVATE src/liblzma/liblzma_w32res.rc)
set_target_properties(liblzma PROPERTIES
LINK_DEPENDS "${CMAKE_CURRENT_SOURCE_DIR}/src/common/common_w32res.rc"
)
# Export the public API symbols with __declspec(dllexport).
target_compile_definitions(liblzma PRIVATE DLL_EXPORT)
else()
# Disable __declspec(dllimport) when linking against static liblzma.
target_compile_definitions(liblzma INTERFACE LZMA_API_STATIC)
endif()
elseif(BUILD_SHARED_LIBS AND CMAKE_SYSTEM_NAME STREQUAL "Linux")
# GNU/Linux-specific symbol versioning for shared liblzma.
# Note that adding link options doesn't affect static builds
# but HAVE_SYMBOL_VERSIONS_LINUX must not be used with static builds
# because it would put symbol versions into the static library which
# can cause problems. It's clearer if all symver related things are
# omitted when not building a shared library.
#
# NOTE: Set it explicitly to 1 to make it clear that versioning is
# done unconditionally in the C files.
target_compile_definitions(liblzma PRIVATE HAVE_SYMBOL_VERSIONS_LINUX=1)
target_link_options(liblzma PRIVATE
"-Wl,--version-script=${CMAKE_CURRENT_SOURCE_DIR}/src/liblzma/liblzma_linux.map"
)
set_target_properties(liblzma PROPERTIES
LINK_DEPENDS "${CMAKE_CURRENT_SOURCE_DIR}/src/liblzma/liblzma_linux.map"
)
elseif(BUILD_SHARED_LIBS AND CMAKE_SYSTEM_NAME STREQUAL "FreeBSD")
# Symbol versioning for shared liblzma for non-GNU/Linux.
# FIXME? What about Solaris?
target_link_options(liblzma PRIVATE
"-Wl,--version-script=${CMAKE_CURRENT_SOURCE_DIR}/src/liblzma/liblzma_generic.map"
)
set_target_properties(liblzma PROPERTIES
LINK_DEPENDS "${CMAKE_CURRENT_SOURCE_DIR}/src/liblzma/liblzma_generic.map"
)
endif()
set_target_properties(liblzma PROPERTIES
# At least for now the package versioning matches the rules used for
# shared library versioning (excluding development releases) so it is
# fine to use the package version here.
SOVERSION "${xz_VERSION_MAJOR}"
VERSION "${xz_VERSION}"
# It's liblzma.so or liblzma.dll, not libliblzma.so or lzma.dll.
# Avoid the name lzma.dll because it would conflict with LZMA SDK.
PREFIX ""
)
CMake: Try to improve compatibility with the FindLibLZMA module. The naming conflict with FindLibLZMA module gets worse. Not avoiding it in the first place was stupid. Normally find_package(LibLZMA) will use the module and find_package(liblzma 5.2.5 REQUIRED CONFIG) will use the config file even with a case insensitive file system. However, if CMAKE_FIND_PACKAGE_PREFER_CONFIG is TRUE and the file system is case insensitive, find_package(LibLZMA) will find our liblzma config file instead of using FindLibLZMA module. One big problem with this is that FindLibLZMA uses LibLZMA::LibLZMA and we use liblzma::liblzma as the target name. With target names CMake happens to be case sensitive. To workaround this, this commit adds add_library(LibLZMA::LibLZMA ALIAS liblzma::liblzma) to the config file. Then both spellings work. To make the behavior consistent between case sensitive and insensitive file systems, the config and related files are renamed from liblzmaConfig.cmake to liblzma-config.cmake style. With this style CMake looks for lowercase version of the package name so find_package(LiBLzmA 5.2.5 REQUIRED CONFIG) will work to find our config file. There are other differences between our config file and FindLibLZMA so it's still possible that things break for reasons other than the spelling of the target name. Hopefully those situations aren't too common. When the config file is available, it should always give as good or better results as FindLibLZMA so this commit doesn't affect the recommendation to use find_package(liblzma 5.2.5 REQUIRED CONFIG) which explicitly avoids FindLibLZMA. Thanks to Markus Rickert.
2021-01-30 16:36:04 +00:00
# Create liblzma-config-version.cmake. We use this spelling instead of
# liblzmaConfig.cmake to make find_package work in case insensitive manner
# even with case sensitive file systems. This gives more consistent behavior
# between operating systems.
#
# FIXME: SameMajorVersion is correct for stable releases but it is wrong
# for development releases where each release may have incompatible changes.
include(CMakePackageConfigHelpers)
write_basic_package_version_file(
CMake: Try to improve compatibility with the FindLibLZMA module. The naming conflict with FindLibLZMA module gets worse. Not avoiding it in the first place was stupid. Normally find_package(LibLZMA) will use the module and find_package(liblzma 5.2.5 REQUIRED CONFIG) will use the config file even with a case insensitive file system. However, if CMAKE_FIND_PACKAGE_PREFER_CONFIG is TRUE and the file system is case insensitive, find_package(LibLZMA) will find our liblzma config file instead of using FindLibLZMA module. One big problem with this is that FindLibLZMA uses LibLZMA::LibLZMA and we use liblzma::liblzma as the target name. With target names CMake happens to be case sensitive. To workaround this, this commit adds add_library(LibLZMA::LibLZMA ALIAS liblzma::liblzma) to the config file. Then both spellings work. To make the behavior consistent between case sensitive and insensitive file systems, the config and related files are renamed from liblzmaConfig.cmake to liblzma-config.cmake style. With this style CMake looks for lowercase version of the package name so find_package(LiBLzmA 5.2.5 REQUIRED CONFIG) will work to find our config file. There are other differences between our config file and FindLibLZMA so it's still possible that things break for reasons other than the spelling of the target name. Hopefully those situations aren't too common. When the config file is available, it should always give as good or better results as FindLibLZMA so this commit doesn't affect the recommendation to use find_package(liblzma 5.2.5 REQUIRED CONFIG) which explicitly avoids FindLibLZMA. Thanks to Markus Rickert.
2021-01-30 16:36:04 +00:00
"${CMAKE_CURRENT_BINARY_DIR}/liblzma-config-version.cmake"
VERSION "${liblzma_VERSION}"
COMPATIBILITY SameMajorVersion)
CMake: Try to improve compatibility with the FindLibLZMA module. The naming conflict with FindLibLZMA module gets worse. Not avoiding it in the first place was stupid. Normally find_package(LibLZMA) will use the module and find_package(liblzma 5.2.5 REQUIRED CONFIG) will use the config file even with a case insensitive file system. However, if CMAKE_FIND_PACKAGE_PREFER_CONFIG is TRUE and the file system is case insensitive, find_package(LibLZMA) will find our liblzma config file instead of using FindLibLZMA module. One big problem with this is that FindLibLZMA uses LibLZMA::LibLZMA and we use liblzma::liblzma as the target name. With target names CMake happens to be case sensitive. To workaround this, this commit adds add_library(LibLZMA::LibLZMA ALIAS liblzma::liblzma) to the config file. Then both spellings work. To make the behavior consistent between case sensitive and insensitive file systems, the config and related files are renamed from liblzmaConfig.cmake to liblzma-config.cmake style. With this style CMake looks for lowercase version of the package name so find_package(LiBLzmA 5.2.5 REQUIRED CONFIG) will work to find our config file. There are other differences between our config file and FindLibLZMA so it's still possible that things break for reasons other than the spelling of the target name. Hopefully those situations aren't too common. When the config file is available, it should always give as good or better results as FindLibLZMA so this commit doesn't affect the recommendation to use find_package(liblzma 5.2.5 REQUIRED CONFIG) which explicitly avoids FindLibLZMA. Thanks to Markus Rickert.
2021-01-30 16:36:04 +00:00
# Create liblzma-config.cmake.
file(WRITE "${CMAKE_CURRENT_BINARY_DIR}/liblzma-config.cmake"
"include(CMakeFindDependencyMacro)
set(THREADS_PREFER_PTHREAD_FLAG TRUE)
find_dependency(Threads)
CMake: Try to improve compatibility with the FindLibLZMA module. The naming conflict with FindLibLZMA module gets worse. Not avoiding it in the first place was stupid. Normally find_package(LibLZMA) will use the module and find_package(liblzma 5.2.5 REQUIRED CONFIG) will use the config file even with a case insensitive file system. However, if CMAKE_FIND_PACKAGE_PREFER_CONFIG is TRUE and the file system is case insensitive, find_package(LibLZMA) will find our liblzma config file instead of using FindLibLZMA module. One big problem with this is that FindLibLZMA uses LibLZMA::LibLZMA and we use liblzma::liblzma as the target name. With target names CMake happens to be case sensitive. To workaround this, this commit adds add_library(LibLZMA::LibLZMA ALIAS liblzma::liblzma) to the config file. Then both spellings work. To make the behavior consistent between case sensitive and insensitive file systems, the config and related files are renamed from liblzmaConfig.cmake to liblzma-config.cmake style. With this style CMake looks for lowercase version of the package name so find_package(LiBLzmA 5.2.5 REQUIRED CONFIG) will work to find our config file. There are other differences between our config file and FindLibLZMA so it's still possible that things break for reasons other than the spelling of the target name. Hopefully those situations aren't too common. When the config file is available, it should always give as good or better results as FindLibLZMA so this commit doesn't affect the recommendation to use find_package(liblzma 5.2.5 REQUIRED CONFIG) which explicitly avoids FindLibLZMA. Thanks to Markus Rickert.
2021-01-30 16:36:04 +00:00
include(\"\${CMAKE_CURRENT_LIST_DIR}/liblzma-targets.cmake\")
# Be compatible with the spelling used by the FindLibLZMA module. This
# doesn't use ALIAS because it would make CMake resolve LibLZMA::LibLZMA
# to liblzma::liblzma instead of keeping the original spelling. Keeping
# the original spelling is important for good FindLibLZMA compatibility.
add_library(LibLZMA::LibLZMA INTERFACE IMPORTED)
set_target_properties(LibLZMA::LibLZMA PROPERTIES
INTERFACE_LINK_LIBRARIES liblzma::liblzma)
")
# Set CMAKE_INSTALL_LIBDIR and friends.
include(GNUInstallDirs)
# Install the library binary. The INCLUDES specifies the include path that
# is exported for other projects to use but it doesn't install any files.
install(TARGETS liblzma EXPORT liblzmaTargets
RUNTIME DESTINATION "${CMAKE_INSTALL_BINDIR}"
COMPONENT liblzma_Runtime
LIBRARY DESTINATION "${CMAKE_INSTALL_LIBDIR}"
COMPONENT liblzma_Runtime
NAMELINK_COMPONENT liblzma_Development
ARCHIVE DESTINATION "${CMAKE_INSTALL_LIBDIR}"
COMPONENT liblzma_Development
INCLUDES DESTINATION "${CMAKE_INSTALL_INCLUDEDIR}")
# Install the liblzma API headers. These use a subdirectory so
# this has to be done as a separate step.
install(DIRECTORY src/liblzma/api/
COMPONENT liblzma_Development
DESTINATION "${CMAKE_INSTALL_INCLUDEDIR}"
FILES_MATCHING PATTERN "*.h")
# Install the CMake files that other packages can use to find liblzma.
set(liblzma_INSTALL_CMAKEDIR
"${CMAKE_INSTALL_LIBDIR}/cmake/liblzma"
CACHE STRING "Path to liblzma's .cmake files")
install(EXPORT liblzmaTargets
NAMESPACE liblzma::
CMake: Try to improve compatibility with the FindLibLZMA module. The naming conflict with FindLibLZMA module gets worse. Not avoiding it in the first place was stupid. Normally find_package(LibLZMA) will use the module and find_package(liblzma 5.2.5 REQUIRED CONFIG) will use the config file even with a case insensitive file system. However, if CMAKE_FIND_PACKAGE_PREFER_CONFIG is TRUE and the file system is case insensitive, find_package(LibLZMA) will find our liblzma config file instead of using FindLibLZMA module. One big problem with this is that FindLibLZMA uses LibLZMA::LibLZMA and we use liblzma::liblzma as the target name. With target names CMake happens to be case sensitive. To workaround this, this commit adds add_library(LibLZMA::LibLZMA ALIAS liblzma::liblzma) to the config file. Then both spellings work. To make the behavior consistent between case sensitive and insensitive file systems, the config and related files are renamed from liblzmaConfig.cmake to liblzma-config.cmake style. With this style CMake looks for lowercase version of the package name so find_package(LiBLzmA 5.2.5 REQUIRED CONFIG) will work to find our config file. There are other differences between our config file and FindLibLZMA so it's still possible that things break for reasons other than the spelling of the target name. Hopefully those situations aren't too common. When the config file is available, it should always give as good or better results as FindLibLZMA so this commit doesn't affect the recommendation to use find_package(liblzma 5.2.5 REQUIRED CONFIG) which explicitly avoids FindLibLZMA. Thanks to Markus Rickert.
2021-01-30 16:36:04 +00:00
FILE liblzma-targets.cmake
DESTINATION "${liblzma_INSTALL_CMAKEDIR}"
COMPONENT liblzma_Development)
CMake: Try to improve compatibility with the FindLibLZMA module. The naming conflict with FindLibLZMA module gets worse. Not avoiding it in the first place was stupid. Normally find_package(LibLZMA) will use the module and find_package(liblzma 5.2.5 REQUIRED CONFIG) will use the config file even with a case insensitive file system. However, if CMAKE_FIND_PACKAGE_PREFER_CONFIG is TRUE and the file system is case insensitive, find_package(LibLZMA) will find our liblzma config file instead of using FindLibLZMA module. One big problem with this is that FindLibLZMA uses LibLZMA::LibLZMA and we use liblzma::liblzma as the target name. With target names CMake happens to be case sensitive. To workaround this, this commit adds add_library(LibLZMA::LibLZMA ALIAS liblzma::liblzma) to the config file. Then both spellings work. To make the behavior consistent between case sensitive and insensitive file systems, the config and related files are renamed from liblzmaConfig.cmake to liblzma-config.cmake style. With this style CMake looks for lowercase version of the package name so find_package(LiBLzmA 5.2.5 REQUIRED CONFIG) will work to find our config file. There are other differences between our config file and FindLibLZMA so it's still possible that things break for reasons other than the spelling of the target name. Hopefully those situations aren't too common. When the config file is available, it should always give as good or better results as FindLibLZMA so this commit doesn't affect the recommendation to use find_package(liblzma 5.2.5 REQUIRED CONFIG) which explicitly avoids FindLibLZMA. Thanks to Markus Rickert.
2021-01-30 16:36:04 +00:00
install(FILES "${CMAKE_CURRENT_BINARY_DIR}/liblzma-config.cmake"
"${CMAKE_CURRENT_BINARY_DIR}/liblzma-config-version.cmake"
DESTINATION "${liblzma_INSTALL_CMAKEDIR}"
COMPONENT liblzma_Development)
#############################################################################
# getopt_long
#############################################################################
# The command line tools needs this.
check_symbol_exists(getopt_long getopt.h HAVE_GETOPT_LONG)
#############################################################################
# xzdec
#############################################################################
if(HAVE_GETOPT_LONG)
add_executable(xzdec
src/common/sysdefs.h
src/common/tuklib_common.h
src/common/tuklib_config.h
src/common/tuklib_exit.c
src/common/tuklib_exit.h
src/common/tuklib_gettext.h
src/common/tuklib_progname.c
src/common/tuklib_progname.h
src/xzdec/xzdec.c
)
target_include_directories(xzdec PRIVATE
src/common
src/liblzma/api
)
target_link_libraries(xzdec PRIVATE liblzma)
if(WIN32)
# Add the Windows resource file for xzdec.exe.
target_sources(xzdec PRIVATE src/xzdec/xzdec_w32res.rc)
set_target_properties(xzdec PROPERTIES
LINK_DEPENDS "${CMAKE_CURRENT_SOURCE_DIR}/src/common/common_w32res.rc"
)
endif()
tuklib_progname(xzdec)
install(TARGETS xzdec
RUNTIME DESTINATION "${CMAKE_INSTALL_BINDIR}"
COMPONENT xzdec)
if(UNIX)
install(FILES src/xzdec/xzdec.1
DESTINATION "${CMAKE_INSTALL_MANDIR}/man1"
COMPONENT xzdec)
endif()
endif()
#############################################################################
# xz
#############################################################################
if(NOT MSVC AND HAVE_GETOPT_LONG)
add_executable(xz
src/common/mythread.h
src/common/sysdefs.h
src/common/tuklib_common.h
src/common/tuklib_config.h
src/common/tuklib_exit.c
src/common/tuklib_exit.h
src/common/tuklib_gettext.h
src/common/tuklib_integer.h
src/common/tuklib_mbstr.h
src/common/tuklib_mbstr_fw.c
src/common/tuklib_mbstr_width.c
src/common/tuklib_open_stdxxx.c
src/common/tuklib_open_stdxxx.h
src/common/tuklib_progname.c
src/common/tuklib_progname.h
src/xz/args.c
src/xz/args.h
src/xz/coder.c
src/xz/coder.h
src/xz/file_io.c
src/xz/file_io.h
src/xz/hardware.c
src/xz/hardware.h
src/xz/list.c
src/xz/list.h
src/xz/main.c
src/xz/main.h
src/xz/message.c
src/xz/message.h
src/xz/mytime.c
src/xz/mytime.h
src/xz/options.c
src/xz/options.h
src/xz/private.h
src/xz/signals.c
src/xz/signals.h
src/xz/suffix.c
src/xz/suffix.h
src/xz/util.c
src/xz/util.h
)
target_include_directories(xz PRIVATE
src/common
src/liblzma/api
)
target_link_libraries(xz PRIVATE liblzma)
target_compile_definitions(xz PRIVATE ASSUME_RAM=128)
if(WIN32)
# Add the Windows resource file for xz.exe.
target_sources(xz PRIVATE src/xz/xz_w32res.rc)
set_target_properties(xz PROPERTIES
LINK_DEPENDS "${CMAKE_CURRENT_SOURCE_DIR}/src/common/common_w32res.rc"
)
endif()
tuklib_progname(xz)
tuklib_mbstr(xz)
check_symbol_exists(optreset getopt.h HAVE_OPTRESET)
tuklib_add_definition_if(xz HAVE_OPTRESET)
check_symbol_exists(posix_fadvise fcntl.h HAVE_POSIX_FADVISE)
tuklib_add_definition_if(xz HAVE_POSIX_FADVISE)
# How to get file time:
check_struct_has_member("struct stat" st_atim.tv_nsec
"sys/types.h;sys/stat.h"
HAVE_STRUCT_STAT_ST_ATIM_TV_NSEC)
if(HAVE_STRUCT_STAT_ST_ATIM_TV_NSEC)
tuklib_add_definitions(xz HAVE_STRUCT_STAT_ST_ATIM_TV_NSEC)
else()
check_struct_has_member("struct stat" st_atimespec.tv_nsec
"sys/types.h;sys/stat.h"
HAVE_STRUCT_STAT_ST_ATIMESPEC_TV_NSEC)
if(HAVE_STRUCT_STAT_ST_ATIMESPEC_TV_NSEC)
tuklib_add_definitions(xz HAVE_STRUCT_STAT_ST_ATIMESPEC_TV_NSEC)
else()
check_struct_has_member("struct stat" st_atimensec
"sys/types.h;sys/stat.h"
HAVE_STRUCT_STAT_ST_ATIMENSEC)
tuklib_add_definition_if(xz HAVE_STRUCT_STAT_ST_ATIMENSEC)
endif()
endif()
# How to set file time:
check_symbol_exists(futimens "sys/types.h;sys/stat.h" HAVE_FUTIMENS)
if(HAVE_FUTIMENS)
tuklib_add_definitions(xz HAVE_FUTIMENS)
else()
check_symbol_exists(futimes "sys/time.h" HAVE_FUTIMES)
if(HAVE_FUTIMES)
tuklib_add_definitions(xz HAVE_FUTIMES)
else()
check_symbol_exists(futimesat "sys/time.h" HAVE_FUTIMESAT)
if(HAVE_FUTIMESAT)
tuklib_add_definitions(xz HAVE_FUTIMESAT)
else()
check_symbol_exists(utimes "sys/time.h" HAVE_UTIMES)
if(HAVE_UTIMES)
tuklib_add_definitions(xz HAVE_UTIMES)
else()
check_symbol_exists(_futime "sys/utime.h" HAVE__FUTIME)
if(HAVE__FUTIME)
tuklib_add_definitions(xz HAVE__FUTIME)
else()
check_symbol_exists(utime "utime.h" HAVE_UTIME)
tuklib_add_definition_if(xz HAVE_UTIME)
endif()
endif()
endif()
endif()
endif()
install(TARGETS xz
RUNTIME DESTINATION "${CMAKE_INSTALL_BINDIR}"
COMPONENT xz)
if(UNIX)
install(FILES src/xz/xz.1
DESTINATION "${CMAKE_INSTALL_MANDIR}/man1"
COMPONENT xz)
option(CREATE_XZ_SYMLINKS "Create unxz and xzcat symlinks" ON)
option(CREATE_LZMA_SYMLINKS "Create lzma, unlzma, and lzcat symlinks"
ON)
set(XZ_LINKS)
if(CREATE_XZ_SYMLINKS)
list(APPEND XZ_LINKS "unxz" "xzcat")
endif()
if(CREATE_LZMA_SYMLINKS)
list(APPEND XZ_LINKS "lzma" "unlzma" "lzcat")
endif()
# Create symlinks in the build directory and then install them.
#
# The symlinks do not likely need any special extension since
# even on Windows the symlink can still be executed without
# the .exe extension.
foreach(LINK IN LISTS XZ_LINKS)
add_custom_target("${LINK}" ALL
"${CMAKE_COMMAND}" -E create_symlink
"$<TARGET_FILE_NAME:xz>" "${LINK}"
BYPRODUCTS "${LINK}"
VERBATIM)
install(FILES "${CMAKE_CURRENT_BINARY_DIR}/${LINK}"
DESTINATION "${CMAKE_INSTALL_BINDIR}"
COMPONENT xz)
add_custom_target("${LINK}.1" ALL
"${CMAKE_COMMAND}" -E create_symlink "xz.1" "${LINK}.1"
BYPRODUCTS "${LINK}.1"
VERBATIM)
install(FILES "${CMAKE_CURRENT_BINARY_DIR}/${LINK}.1"
DESTINATION "${CMAKE_INSTALL_MANDIR}/man1"
COMPONENT xz)
endforeach()
endif()
endif()
#############################################################################
# Tests
#############################################################################
include(CTest)
if(BUILD_TESTING)
set(LIBLZMA_TESTS
test_bcj_exact_size
test_block_header
test_check
test_filter_flags
test_hardware
test_index
test_index_hash
test_memlimit
test_stream_flags
test_vli
)
foreach(TEST IN LISTS LIBLZMA_TESTS)
add_executable("${TEST}" "tests/${TEST}.c")
target_include_directories("${TEST}" PRIVATE
src/common
src/liblzma/api
src/liblzma
lib
)
target_link_libraries("${TEST}" PRIVATE liblzma)
# Put the test programs into their own subdirectory so they don't
# pollute the top-level dir which might contain xz and xzdec.
set_target_properties("${TEST}" PROPERTIES
RUNTIME_OUTPUT_DIRECTORY "${CMAKE_CURRENT_BINARY_DIR}/tests_bin"
)
add_test(NAME "${TEST}"
COMMAND "${CMAKE_CURRENT_BINARY_DIR}/tests_bin/${TEST}"
)
# Set srcdir environment variable so that the tests find their
# input files from the source tree.
#
# Set the return code for skipped tests to match Automake convention.
set_tests_properties("${TEST}" PROPERTIES
ENVIRONMENT "srcdir=${CMAKE_CURRENT_LIST_DIR}/tests"
SKIP_RETURN_CODE 77
)
endforeach()
endif()